Table of Contents
Advertisement
1886
If you need a different downrod length follow these steps:
1
1
10
10
WARNING
FAN FALL HAZARD
To prevent SERIOUS INJURY or DEATH:
SIMPLEconnect connects to available 2.4 GHZ WiFi networks.
Download the app:
1
Visit your app store and search "Simpleconnect
Launch the app.
2
Follow the onscreen prompts to set up your fan.
3
11
Ceiling Bracket
Follow steps 1-5 to remove standard downrod pipe
2
3
8
9
2
9
8
Follow steps 6-10 to reassemble with new downrod
• VERIFY the downrod
• ALWAYS follow the
is assembled correctly
downrod assembly
by firmly pulling on the
instructions exactly.
hanger ball.
Setting up
Hanging Fan
Wiring
Downrod
4
3
7
4
7
• Pin must be reinserted
to secure downrod
assembly.
2.0" to find the app.
™
Installing Fan Body
5
5
6
Here is another view of
the downrod assembly
unassembled.
6
Assembled downrod
should look like this
WiFi
Use of the HomeKit logo means that an electronic accessory
has been designed to connect specifically to iPod, iPhone, or
iPad, respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for
the operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory
with iPod, iPhone, or iPad may affect wireless performance.
Compatible with iOS 13.0 or higher / Android 5.0 or higher
Android and Google Play are trademarks of Google Inc.
Apple logo is a trademark of Apple, Inc.
App store is a service mark of Apple, Inc.
Note: The HomeKit setup code is located on the
front cover of the English side of this manual, on
the inside of the remote cover, and on fan itself
(fan style may vary).
Hunter Pro Tip:
Need to install the app later?
When ready, turn the wall switch off and then on.
Wait three minutes before downloading the app.
Blades
Light
Pin
Pin
Remote
App
Advertisement
Table of Contents
