Related Manuals for Milwaukee M18 2902-20
Summary of Contents for Milwaukee M18 2902-20
- Page 1 OPERATOR'S MANUAL Cat. No. 2902-20 M18™ BRUSHLESS 1/2" HAMMER DRILL/DRIVER WARNING To reduce the risk of injury, user must read and understand operator's manual...
-
Page 2: General Power Tool Safety Warnings
GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury. -
Page 3: Specifications
If unreadable or missing, Liquid ejected from the battery may cause irritation contact a MILWAUKEE service facility for a free replacement. or burns. • Do not use a battery pack or tool that is dam- •... -
Page 4: Functional Description
OPERATION FUNCTIONAL DESCRIPTION Always remove battery pack before WARNING changing or removing accesso- ries. Only use accessories specifically recom- mended for this tool. Others may be hazardous. To reduce the risk of injury, always wear safety goggles or glasses with side shields. Installing Bits Always remove the battery before inserting or remov- ing bits. - Page 5 The torque specifications shown here are approximate Drilling values obtained with a fully charged battery pack. Place the bit on the work surface and apply firm pres- sure before starting. Too much pressure will slow the Clutch bit and reduce drilling efficiency. Too little pressure Setting in.
-
Page 6: Maintenance
Return the tool, battery pack, and charger to a MILWAUKEE service facility for repair. After six months to one year, depending on use, return the tool, battery pack and charger to a MILWAUKEE service facility for inspection.