Yamaha VMAX VMX17L Owner's Manual page 71

1
2
3
4
5
1. Final gear case breather cap bolt
2. Washer
3. Final gear case breather cap
4. Final gear oil filler bolt
5. Gasket
4. Check the gaskets for damage,
and replace them if necessary.
5. Pour the recommended type of oil
in the final gear oil filler hole until it
flows out of the oil check bolt hole.
6. Install the oil check bolt, the oil fill-
er bolt and their gasket, and then
tighten the bolts to the specified
torques.
Tightening torques:
Final gear oil check bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
Final gear oil filler bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
Periodic maintenance and adjustment
7. Install the final gear case breather
cap by installing the washer and
bolt, and then tighten the bolt to
the specified torque.
Tightening torque:
Final gear case breather cap bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
To change the final gear oil
1. Place the vehicle on a level surfa-
ce.
2. Place an oil pan under the final
gear case to collect the used oil.
3. Remove the final gear case
breather cap by removing the bolt
and washer.
7-16
1
2
3
4
5
1. Final gear case breather cap bolt
2. Washer
3. Final gear case breather cap
4. Final gear oil filler bolt
5. Gasket
4. Remove the final gear oil filler bolt,
the final gear oil drain bolt and
their gasket to drain the oil from
the final gear case.
7