Yamaha VMAX VMX17L Owner's Manual page 31

6. Push the start switch "
LECT" to stop the countdown
clock.
7. Push "RESET" to reset the count-
down clock and stopwatch.
8. Repeat steps 5–7, or push "RE-
SET" again for two seconds to en-
ter the Normal mode.
TIP
To perform further multi-function dis-
play settings, be sure the transmission
is in neutral, then enter the Select
mode again by pushing and holding
"SELECT" and "RESET" for three sec-
onds.
Checking and resetting the system sta-
tus
The status/readings of the following
items are displayed, and the tripmeters
can be reset.
 tripmeters and odometer
 fuel consumption
 air intake temperature
 throttle opening position
" or "SE-
TIP
 The "System status" menu cannot
be entered if the fuel level warning
light or coolant temperature warn-
ing light is on.
 If, when the engine is running
while the system status menu is
displayed, the fuel level warning
light or coolant temperature warn-
ing light comes on, the Normal
mode is automatically displayed.
1. Push "SELECT" to highlight "Sys-
tem status", then push "RESET".
2. Push "SELECT"
"Yes", then push "RESET". (High-
lighting "No" and pushing "RE-
SET" returns to the previous
menu.)
Instrument and control functions
The display changes to the status
screen.
1. Odometer/tripmeter/fuel reserve tripmeter
2. Clock
3. Instantaneous fuel consumption
4. Throttle opening position display
5. Transmission gear indicator
6. Air intake temperature display
Push "SELECT" and the various trip-
to highlight
meters and the odometer are dis-
played in the following order:
(TRIP-F) → TRIP-1 → TRIP-2 → ODO
→ (TRIP-F)
Push "RESET" to reset a tripmeter.
TIP
 Push "SELECT" for two seconds
4-13
1 2
6 5 4
to switch between miles and kilo-
meters.
3
4