Yamaha VMAX VMX17L Owner's Manual page 29

3. Push "SELECT" to highlight the
desired brightness level.
4. Push "RESET" to set the selected
brightness level.
5. Push "RESET" to return to the pre-
vious menu.
6. Push "SELECT" to scroll to " ",
then push "RESET". This allows
you to select another item in the
menu.
Setting the clock
1. Push "SELECT" to highlight "Dis-
play".
2. Push "RESET"; the following
screen is displayed.
Instrument and control functions
3. Push "RESET" and the hour digits
start flashing.
4. Push "SELECT" to increment the
hours.
5. Push "RESET", and the minute
digits start flashing.
6. Push "SELECT" to increment the
minutes.
7. Push "RESET" to start the clock.
8. Push "RESET" again to return to
the previous menu.
Resetting all the brightness and shift
timing indicator light functions
This resets all settings made to the
brightness and shift timing indicator
light functions.
1. Push "SELECT" to highlight "Dis-
play".
2. Push "RESET".
3. Push "SELECT" to highlight "All
reset".
4-11
4. Push "RESET", then push "SE-
LECT" to highlight "Yes".
5. Push "RESET" to reset the bright-
ness and shift timing light indica-
tor values to the factory setting.
The display returns to the Normal
mode.
TIP
To perform further multi-function dis-
play settings, enter the Select mode
again by pushing and holding "SE-
LECT" and "RESET" for three seconds.
Using the stopwatch
The stopwatch can be activated as fol-
lows.
1. Push "SELECT" to
"Stopwatch".
4
highlight