Table of Contents
Advertisement
The line will hang up if the handset moves out of range of the base. Move closer to the
base. The handset will automatically reconnect to the base.
Setting up
IMPORTANT
The base station must be plugged into the mains power at all times. Do not connect the
telephone line cord into the wall socket until the handset is fully charged. Use only the
power adaptor and telephone line cord supplied with the product.
Connecting the base
1. Plug the telephone line cord into the socket marked
2. Plug the power adaptor into the socket marked
plug the other end into the mains power wall socket. The green Power/In use light
comes on and you will hear a confirmation tone.
Installing and charging the handset
8
l
on the underside of the base.
P
on the underside of the base and
Getting started
Advertisement
Table of Contents
