Table of Contents
Advertisement
n
5. Press
to return to standby mode.
7. Clock & Alarm
If you have subscribed to a FSK type Caller ID Service, the date and time is set
automatically when you receive your first call.
If you do not have a FSK Caller ID service, you can set the date and time manually.
NOTES
In either case the year has to be manually set.
7.1
To set date and time manually
1. Press Menu, scroll
2.
Date & Time
is highlighted. Press Select.
3. Enter the date using the format DD/MM/YY e.g.
4. Enter the time (HH:MM) and press Save.
If the current time format setting is 12 hour, select
n
5. Press
to return to standby mode.
7.2
To set alarm
When the alarm is set, the display shows
Each handset can have a different alarm setting.
1. Press Menu, scroll
D
2. Scroll
to
Alarm
U
D
3. Scroll
or
to
If
Alarm
is set to On:
U
D
Scroll
or
to Once,
Enter the time (HH:MM) and press Save.
If the current time format setting is 12 hour, select
n
4. Press
to return to standby mode.
NOTES
If the alarm is set to Once,
once.
If the alarm is set to
On Daily
sounded. When the alarm goes off, press any key to stop the ring.
After a power failure base will update date, time and year from handset and vice versa.
If both base and handset power has been reset, it will restore to default date, time and
year and you may have to set it manually.
7.3
To set time format
1. Press Menu, scroll
D
2. Scroll
to
Time Format
30
D
to
Clock & Alarm
D
to
Clock & Alarm
and press Select.
Off
or
On
and press Select.
Mon - Fri
or
On Daily
will disappear from the screen after the alarm has sounded
or
Mon -
Fri,
D
to
Clock & Alarm
and press Select.
and press Select.
04/08/15
am
or pm.
icon.
and press Select.
then press Select.
am
or pm.
will remain on the screen after the alarm has
and press Select.
for 4 August 2015.
Clock & Alarm
Advertisement
Table of Contents
