Bosch AdvancedImpact 9000 Original Instructions Manual page 16

16 | English
Impact drill
Clockwise/anticlockwise rota-
tion
Rapid shut-off (KickBack Con-
trol)
Fully automatic spindle lock
(Auto-Lock)
Spindle collar diameter
Max. drilling diameter (first/
second gear)
– Masonry
– Concrete
– Steel
– Wood
Chuck capacity
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-1.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 96 dB(A); sound power level
107 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-1:
2
Drilling into metal: a = 6.5 m/s , K = 1.5 m/s
h
Impact drilling into concrete: a = 20 m/s
h
2
Screwdriving: a < 2.5 m/s , K = 1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
1 609 92A 775 | (15.11.2021)
power tool and application tools, keeping their hands warm,
AdvancedImpact
and organising workflows correctly.
900 | 9000
●
Assembly
●
u
●
Auxiliary Handle (see figure A)
mm 43 u
u
mm 20/16
mm –/18
You can adjust the auxiliary handle (9) to any of four posi-
mm 13/8
tions in order to achieve a safe work posture that minimises
fatigue.
mm 40/25
Turn the wing bolt (21)/(18) anticlockwise and guide the
mm 1.5–13
auxiliary handle (9) in the required position over the drill
kg 2.6
chuck onto the spindle collar of the power tool.
Turn the wing bolt (21)/(18) clockwise to retighten it.
/ II
Setting the Drilling Depth (see figure B)
You can use the depth stop (23) to set the required drilling
depth X.
Press the button for depth stop adjustment (22) and insert
the depth stop into the auxiliary handle (9).
The fluting on the depth stop (23) must face downwards.
Pull the depth stop (23) far enough out that the distance
between the drill bit tip and the edge of the depth stop (23)
corresponds to the required drilling depth X.
Drill Assistant (accessory)
Applying the Drill Assistant (see figures C–D)
The Drill Assistant (10) can be used with and without the
2
,
dust collection device (13). Use of the dust collection
2 2
, K = 1.5 m/s ,
device (13) is limited to drill bits with a diameter of 12 mm
2
.
and a length of 120 mm.
Attach the dust collection device (13) to the adapter (26).
Press the unlocking button (8) to release the Drill Assistant
(10) from its parked position.
Guide the Drill Assistant (10) over the drill chuck onto the
spindle collar of the power tool.
Lock it by turning the wing bolt (18) clockwise.
Setting the Drilling Depth (see figures E–F)
Attach the drill bit (see section "Changing the Tool").
You can use the setting ring (17) to set the required drilling
depth X.
Unlock the setting ring (17) by turning it to the left
Place the dust container (11) or the adapter (26) flush
against the wall or workpiece. Move the tip of the drill bit to
the wall or workpiece.
Slide the setting ring (17) backwards until the distance
matches the required drilling depth X or place a wall plug on
the rail and slide the setting ring (17) backwards to the wall
Pull the plug out of the socket before carrying out any
work on the power tool.
Do not operate your power tool without the auxiliary
handle (9).
Before any work, make sure that the wing bolt (18)/
(21) is tightened. Loss of control can cause personal in-
jury.
.
Bosch Power Tools