Attaching The Neutral Electrode - Olympus A00010A Instructions For Use Manual

Before use
Checking for mechanical defects
1. Check that the product has:
2. Check all markings on the product for clear visibility.
Checking for performed reprocessing
1. Make sure that the product has been properly reprocessed.
2. Visually inspect the product thoroughly. The product must be
3. Only use the product if it is visually clean. Reprocess the
Replace if necessary
If the instrument is damaged or does not function properly,
replace it. Contact an authorized service center for repair.

4.2 Attaching the neutral electrode

This section applies only to the following products:
A00010A, A00011A, A00012A, A0335.1, A0355, A0357, A0358,
A0391, A0392, A0393, O0120.1
● Refer to the instructions for use of the electrosurgical
● Attach the neutral electrode to the patient.
● Connect the neutral electrode to the electrosurgical
24
– no dents, cracks, kinks, or deformations
– no deep scratches
– no corrosion
– no missing or loose parts
– no cuts and other defects on the insulation
visually clean.
product again if necessary.
generator and the neutral electrode.
generator.