Energy Analyze Plus Software
Purchase of the Logger includes Fluke Energy Analyze Plus software.
With the software, you can do many tasks from a computer:
•
Download campaign results for further processing and archiving.
•
Analyze energy or load profiles, including zoom-in and zoom-out
on details.
•
Analyze voltage and current harmonics.
•
Review the voltage and current events that occur during the
campaign.
•
Analyze the RMS profile and wave shapes recorded on events
(1738 or 1736 with 1736/Upgrade license).
•
Review the key power quality parameters.
•
Create a EN 50160 compliance report(1738 or 1736 with
1736/Upgrade license)
•
Perform an IEEE 519 analysis and create a pass/fail report
(requires IEEE 519/Report license).
•
Add comments, annotations, pictures, and other supplementary
information to campaign data.
•
Overlay data from different campaigns to identify and document
changes.
•
Create a report from the analysis you performed.
•
Export measurement results for further processing using a third
party tool.
1.800.561.8187
1.800.561.8187
System Requirements
The computer hardware requirements for the software are:
•
•
•
•
•
www.
www.
.com
.com
Free Hard Disk space 50 MB, >10 GB (for measurement data)
recommended
Installed Memory:
•
1 GB minimum for 32-bit systems
•
≥2 GB recommended for 32-bit systems,
•
≥4 GB recommended for 64-bit systems
Monitor, 1280 x 1024 (@4:3) or 1440 x 900 (@16:10), wide-screen
(16:10) at higher resolution recommended
USB 2.0 ports
Windows 7, Windows 8.x, and Windows 10 (32/64-bit)
Note
Windows 7 Starter edition and Windows 8 RT are not
supported.
information@itm.com
information@itm.com
Power Logger
Energy Analyze Plus Software
57