Fujitsu TWAIN 32 Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Scanner
  5. TWAIN 32
  6. Manual
Fujitsu TWAIN 32 Manual

Fujitsu TWAIN 32 Manual

Scanner utility for microsoft windows 32bit version 8.8
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
For Use with Microsoft Windows. 98, Windows. Me, Windows. 2000,
Windows. XP, Windows. NT and Windows. 95
This guide provides installation procedures to help you complete hardware/software
installation. Please follow below installation procedure to complete the hardware installation
properly and thank you for purchasing the Fujitsu Scanner:
1) Connect the scanner to power source
2) Connect the scanner to the PC through SCSI or USB interface. (refer to item 5 for more
information on how to install the SCSI card)
3)
Make your selection from below list for Mini Port Installation when using USB Interface
4)
Make your selection from below list when using SCSI Interface
5)
How to install SCSI card
6) How to install Twain Data Source >
7)
Scanner and Camera Properties
PS
•
The SCSI or USB driver installation must be completed first, then a data source.
TWAIN or ISIS driver must be also Installed for the scanner to operate.
•
Make sure that the operating system is installed correctly.
•
Your Operating System CDROM may be required to complete this installation.
•
Some of the screen shots may not contain the correct product model number.
•
USB interface is not supported on Windows ® NT and Windows ® 95.
•
Select the source before start using the hardware.
Scanner Drivers installation Guide
USB
SCSI
Back to Main Page

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu TWAIN 32

Summary of Contents for Fujitsu TWAIN 32

  • Page 1 This guide provides installation procedures to help you complete hardware/software installation. Please follow below installation procedure to complete the hardware installation properly and thank you for purchasing the Fujitsu Scanner: 1) Connect the scanner to power source 2) Connect the scanner to the PC through SCSI or USB interface. (refer to item 5 for more...
  • Page 2 FUJITSU TWAIN 32 Scanner Driver Scanner Utility for   Microsoft Windows Version 9.8    For Use with Microsoft Windows 98, Windows Me, Windows 2000 and  Windows...
  • Page 3 FUJITSU TWAIN 32 Scanner Driver Scanner Utility for   Microsoft Windows <32bit> Version 8.8   For Microsoft Windows 95 and Windows NT...
  • Page 4 Introduction   Thank you for purchasing the "Scanner Utility for Microsoft Windows V9.8". This software contains a TWAIN-compliant image scanner driver (simply called "driver" in this guide) and utilities. This guide provides a description summary of the driver, as well as a description of the installation method and procedures for appropriate use.
  • Page 5 Trademarks MS-DOS, Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. IBM PC/AT and DOS/V are registered trademark of International Business Machine Corporation. Adaptec is a registered trademark of Adaptec Inc. EZ-SCSI is a trademark of Adaptec Inc. Other product names are the trademarks or registered trademarks of the respective companies.
  • Page 6 Organization This manual explains how to install and use this driver, and how to use the TWAIN scanning utility. • Installation This section explains the procedure for installing the environments in which this driver may operate. • Using the Driver This section explains how to use the driver.

  • Page 7: Table Of Contents

    Contents Trademarks ..........................Organization ........................... 1. Outline ..........................6 1.1 Characteristics of this Driver..................6 1.2 Operating Environment....................6 1.3 Explanatory Notes ......................8 1.4 Explanation of terms....................9 2. TWAIN..........................10 2.1 TWAIN ........................10 2.2 TWAIN Application ....................10 3. Mini Port Installation (For USB Interface)…………… ..........11 3.1 Preparation .......................11 3.2 Installing the Mini Driver ...................14 ...
  • Page 8 4.3 Uninstall………………………………………………………………………………… ..53 5. Definition of Scanner and Camera Properties ............53 5.1 Displaying Scanner and Camera Properties ............53 5.2 General Tab Folder ....................53 5.3 Event Tab Folder ......................55 5.4 Diagnostic Tab Folder ....................56 5.5 Device Information Tab Folder .................57 5.6 Device Setup Tab Folder..................58 5.7 Version Information Tab Folder ................62 5.8 Color Management Tab Folder.................62...

  • Page 9: Outline

    −  • Adaptec SCSI adapter or Fujitsu FMV SCSI adapter In some cases, the driver may not operate with the above systems. − Please check in advance with your place of purchase. Notes are provided on the accepted SCSI adapters in README.TXT, −...
  • Page 10 • RAM: 32 MB or more (a minimum of 64 MB is recommended) • Available hard disk space: 10 MB or more (excluding the area for storing images) • CD-ROM drive (required for installation) • Mouse (recommended)

  • Page 11: Explanatory Notes

    The menus and buttons used in the program description are enclosed in []. Example: [File] menu [OK] button ◊ Keyboard The keytop indications comply with the standard keyboard of the Fujitsu FMV series. Major differences between the Fujitsu FMV keyboard and other keyboards are shown below. FMV keytops...

  • Page 12: Explanation Of Terms

    Note that the expressions may vary with the type of scanner connected. 1.4 Explanation of terms ◊ IPC option board IPC-2/2D in this guide refers to the IPC-2 and IPC-2D image processing circuit. IPC-3/3D in this guide refers to the IPC-3 and IPC-3D option board. IPC-4D in this guide refers to the IPC-4D option board.

  • Page 13: Twain

    2. TWAIN 2.1 TWAIN TWAIN is the specification that defines the standard software protocol and application programming interface (API) for data exchange between a software application program and an image input device such as the image scanner. [TWAIN development background] In the past, development of a new scanner inevitably required the development of a compatible driver and a sample (demonstration) program exclusively designed for the new scanner.

  • Page 14: Mini Port Installation (For Usb Interface)

    BACK TO MAIN PAGE 3. Mini Port Installation (For USB Interface) 3.1 Preparation 1. Make sure that the operating system is installed correctly. 2. In case of the SCSI connection, confirm that the SCSI adapter is connected to the computer mainframe and operating correctly. In case of the USB connection, confirm that the USB port is installed in the computer.
  • Page 15 Connect the scanner and activate Windows  Windows XP automatically recognizes the scanner and installs the WIA-compliant device driver. Delete “Fujitsu M3091DCd” or “Fujitsu M3092DCd” listed in [imaging device] of [device manager].   Insert “Scanner Utility for Microsoft Windows ”...
  • Page 16 How to restore inf file:  1. Connect the scanner and activate Windows 2. Delete “Fujitsu M3091DCd”, “Fujitsu M3092DCd”, “M3091DCd” or “M3092DCd” listed in [imaging devices] or [Other devices] of [device manager].  ...

  • Page 17: Installing The Mini Driver

    BACK TO MAIN PAGE 3.2 Installing the Mini Driver  3.2.1 Installing for the first time (For Windows 1. Connect the scanner to be used to the computer. Then, turn on the scanner. Lastly, turn on the personal computer. Note In case of the SCSI connection, be sure to turn on the power in this sequence.
  • Page 18 3. If the scanner has been detected normally, the following dialog box appears. Click the [Next] button. 4. The following dialogue opens. Confirm that [Search for the best driver for your device (Recommended)] has been selected, and click the [Next] button. 5.
  • Page 19 6. The following screen is displayed. Deselect the [Floppy disk drives] and [CD- ROM drive] check boxes and, instead, select the [Specify a location] check box. Then, click the [Browse…] button. 7. In the dialog box that is displayed, select the following directory destination on the CD-ROM, and click the [OK] button.
  • Page 20 9. When installation is completed, the following screen is displayed. Click the [Finish] button. 10. Restart the system by following the instructions on the screen. 11. Do the following to check whether the driver has been properly installed.
  • Page 21 <Device Manager> Right-click the [My Computer] icon and select the properties menu item, or double-click the [System] icon on the [Control] panel. Then, select the [Device Manager] tab folder in the system properties dialog box. The device to be used is displayed under imaging devices. As the model name, a number following the letter M may be displayed in case of connecting some scanner models.

  • Page 22: Installing For The First Time (For Windows  Me)

    BACK TO MAIN PAGE  3.2.2 Installing for the first time (For Windows 1. Connect the scanner to be used to the computer. Then, turn on the scanner. Lastly, turn on the personal computer. Note In case of the SCSI connection, be sure to turn on the power in this sequence.
  • Page 23 6. The following screen is displayed. Select the [Search for the best driver for your device.] and, select the [Specify a location] check box. Then, click the [Browse…] button. 7. In the dialog box that is displayed, select the following directory destination on the CD-ROM, and click the [OK] button.
  • Page 24 9. When installation is completed, the following screen is displayed. Click the [Finish] button. 10. Restart the system by following the instructions on the screen.
  • Page 25 11. Do the following to check whether the driver has been properly installed. <Device Manager> Right-click the [My Computer] icon and select the properties menu item, or double-click the [System] icon on the [Control] panel. Then, select the [Device Manager] tab folder in the system properties dialog box. The device to be used is displayed under imaging devices.

  • Page 26: Installing For The First Time (For Windows  2000)

    BACK TO MAIN PAGE  3.2.3 Installing for the first time (For Windows 2000) 1. Connect the scanner to be used to the computer. Then, turn on the scanner. Lastly, turn on the personal computer. Note In case of the SCSI connection, be sure to turn on the power in this sequence.
  • Page 27 4. Confirm that [Search for a suitable driver for my device (recommended)] has been selected, and click the [Next] button. 5. Insert the Installation CD titled “ScanPartner Installation CD” into the disk drive. Here, the CD-ROM drive is temporarily labeled "D:". (If the current operating environment uses a different label, replace the drive label specifications below accordingly.) If automatic start is defined, the start screen of setup is displayed.
  • Page 28 7. The following dialog box is displayed. From the screen displayed by the [Browse] button, select the following directory destination on the CD-ROM, and click the [OK] button. D:\Driver2 (When the CD drive is setting in "D:") 8. Click the [Next] button, and confirm that the following screen is displayed. Click the [Next] button again.
  • Page 29 9. When the file has been copied and the installation is completed, the following screen is displayed. Click the [Finish] button. Restart the system by following the instructions on the screen.
  • Page 30 11. Do the following to check whether the driver has been properly installed. <Device Manager> Right-click the [My Computer] icon and select the properties menu item, or double-click the [System] icon on the [Control] panel. Then, select the [Device Manager] tab folder in the system properties dialog box. The device to be used is displayed under imaging devices.

  • Page 31: Installing For The First Time (For Windows  Xp)

    BACK TO MAIN PAGE  3.2.4 Installing for the first time (For Windows 1. Connect the scanner to be used to the computer. Then, turn on the scanner. Lastly, turn on the personal computer. Note In case of the SCSI connection, be sure to turn on the power in this sequence.
  • Page 32 5. The following screen is displayed. Insert the Installation CD titled “ScanPartner Installation CD” into the disk drive. Here, the CD-ROM drive is temporarily labeled "D:". (If the current operating environment uses a different label, replace the drive label specifications below accordingly.) If automatic start is defined, the start screen of setup is displayed.
  • Page 33 9. When the file has been copied and the installation is completed, the following screen is displayed. Click the [Finish] button. Restart the system by following the instructions on the screen. Go to the section 3.3 “Installing TWAIN Data Source” and follow the procedure.

  • Page 34: Updating The Driver (For Windows  98)

    BACK TO MAIN PAGE  3.2.5 Updating the driver (for Windows If a driver of previous version has been installed, the latest driver for the system may not be installed by the procedure given in Section 3.2.1. If this occurs, update the driver by following the procedure below.
  • Page 35 8. The [Update Device Driver Wizard] dialog box is displayed. Click the [Next] button. 9. Select [Display a list of all the drivers in a specific location, so you can select the driver you want], and click the [Next] button. 10.
  • Page 36 11. The following dialog box is displayed. Click the [Have Disk] button, and then click the [Browse (R)]...] button. 12. In the dialog box that is displayed, select the following directory destination on the CD-ROM, and click the [OK] button. D:\Driver2 (When the CD drive is setting in "D:") 13.
  • Page 37 15. When the file has copied and installation is completed, the following dialog box is displayed. Click the [Finish] button. 16. Restart the system by following the instructions on the screen. 17. Go to section 3.3 “Installing TWAIN Data Source” and follow the procedure.

  • Page 38: Updating The Driver (For Windows  Me)

    BACK TO MAIN PAGE  3.2.6 Updating the driver (for Windows If a driver of previous version has been installed, the latest driver for the system may not be installed by the procedure given in Section 3.2.2. If this occurs, update the driver by following the procedure below.
  • Page 39 8. The [Update Device Driver Wizard] dialog box is displayed. Select [Specify the location of the driver (Advanced)] and click the [Next] button. 9. The following dialog box is displayed. Select [Display a list of all the drivers in a specific location, so you can select the driver you want], and click the [Next] button.
  • Page 40 11. The following dialog box is displayed. Click the [Have Disk] button, and then click the [Browse (R)]...] button. 12. In the dialog box that is displayed, select the following directory destination on the CD-ROM, and click the [OK] button. D:\Driver2 (When the CD drive is setting in "D:") 13.
  • Page 41 15. When the file has copied and installation is completed, the following dialog box is displayed. Click the [Finish] button. 16. Restart the system by following the instructions on the screen. 17. Go to section 3.3 “Installing TWAIN Data Source” and follow the procedure.

  • Page 42: Updating The Driver (For Windows  2000)

    BACK TO MAIN PAGE  3.2.7 Updating the driver (for Windows 2000) For some models, an appropriate driver included as part of the operating system may be automatically installed during the power-on sequence. Consequently, the newest driver for the system may not be installed by following the procedure given in Section 3.2.3. If this occurs, update the driver by following the procedure below.
  • Page 43 5. The following device manager window opens, and the device name is displayed under [Imaging devices]. 6. Select the device name, right-click the device icon, and select the [Properties] menu item from the pop-up menu. 7. The [Properties] dialog box is displayed. Select the [Driver] tab folder, and then click the lower right [Update Driver] button.
  • Page 44 9. Select [Display a list of the known drivers for this device so that I can choose a specific driver], and click the [Next] button. 10. Insert the Installation CD titled “ScanPartner Installation CD” into the disk drive. Here, the CD-ROM drive is temporarily labeled "D:". (If the current operating environment uses a different label, replace the drive label specifications below accordingly.) If automatic start is defined, the start screen of setup is displayed.
  • Page 45 12. In the dialog box that is displayed, select the following directory destination on the CD-ROM, and click the [OK] button. D:\Driver2 (When the CD drive is setting in "D:") 13. A list of different models is displayed. Select the appropriate device name, and click the [Next] button.
  • Page 46 16. Restart the system by following the instructions on the screen. 17. Go to the section 3.3 “Installing TWAIN Data Source” and follow the procedure.

  • Page 47: Updating The Driver (For Windows  Xp)

    BACK TO MAIN PAGE  3.2.8 Updating the driver (for Windows If a driver of previous version has been installed, the latest driver for the system may not be installed by following the procedure given in Section 3.2.4. If this occurs, update the driver by following the procedure below.

  • Page 48: The [Properties] Dialog Box Is Displayed. Select The [Driver] Tab Folder, And

    7. The [Properties] dialog box is displayed. Select the [Driver] tab folder, and then click the [Update Driver] button. 8. The [Update Device Driver Wizard] dialog box is displayed. Select [Install from a list or specific location (Advanced)], and click the [Next] button. 9.
  • Page 49 11. The following dialog box is displayed. Click the [Have Disk...], and then click the [Browse...] button. 12. In the dialog box that is displayed, select the following directory destination on the CD-ROM, and click the [OK] button. D:\Driver2 (When the CD drive is setting in "D:") 13.
  • Page 50 15. When the file has copied and installation is completed, the following dialog box is displayed. Click the [Finish] button. 17. Restart the system by following the instructions on the screen. 18. Go to the section 3.3 “Installing TWAIN Data Source” and follow the procedure.

  • Page 51: Installing Twain Data Source

    Click the [Continue] button to start installation. 5. Confirm that the following group has been created when the setup is complete. The icons displayed in the window depend on the components selected in [Select Components] during installation. Figure: Fujitsu TWAIN group...

  • Page 52: Uninstall

    3.4 Uninstall The uninstall process removes the software and returns the hard disk to its pre- installation state. 1. Click on [Start], followed by [Settings], and then [Control Panel]. The Control Panel is then displayed. 2. Double-click on "Add/Remove Programs" from the icon list of the Control Panel.

  • Page 53: When The Scanner Is Not Detected Automatically (Supplementation)

    3.5 When the scanner is not detected automatically (Supplementation) During the procedures given in the section 3.2.1 to 3.2.4, if the scanner is not detected automatically immediately after turning the power on, open the property of the [System] in the [Control Panel] to display the list of [Device Manager] and confirm the registration condition of the scanner.

  • Page 54: Prepration

    BACK TO MAIN PAGE 4. Installation (Twain ASPI Driver Installation when using SCSI Interface) 4.1 Preparation 1. Check that the operating system is installed correctly. 2. Check that the SCSI adapter is connected to the computer. 3. Check whether the SCSI driver and ASPI manager are installed correctly ...

  • Page 55: Installation (When Using Twain Aspi Driver Version 8.8 With Scsi Interface)

    6. Confirm that the following group is created when setup has been completed. The displayed icon depends on the selection of "Components" during installation. Figure Fujitsu TWAIN group * For the FUJITSU Scanner Control Center, the Gamma Pattern Editor and the Firmware Updater, see section 6, 5, and 7 respectively.

  • Page 56: Uninstall

    BACK TO MAIN PAGE 4.3 Uninstall The uninstall process removes the software and returns the hard disk to its pre- installation state. 1. Click on [Start], followed by [Settings], and then [Control Panel]. The Control Panel is then displayed. 2. Double-click on "Add/Remove Programs" from the icon list of the Control Panel.

  • Page 58: Event Tab Folder

    5.3 Event Tab Folder By defining the settings in this folder, a specified application can automatically be started for use with a connected scanner. However, the contents of this tab folder are not displayed for devices that are not supported by this function. ♦...

  • Page 59: Diagnostic Tab Folder

    5.4 Diagnostic Tab Folder To perform more detailed diagnostic tests than those provided in the general tab folder, click the [Diagnose] button.   In Windows 2000 or Windows XP, only a user who has administrator authority can run these tests.

  • Page 60: Device Information Tab Folder

    5.5 Device Information Tab Folder A list of the functions compatible with the selected scanner driver is displayed. The items displayed depend on the selected model of scanner. Only hardware functions are displayed. The functions realized by software are not displayed in this tab folder. Therefore, the displayed content may not match the content specified during reading.

  • Page 61: Device Setup Tab Folder

    5.6 Device Setup Tab Folder Information related to the operation and maintenance of the scanner driver can be displayed and set up. For some scanner models, some items cannot be set up (grayed out). Changing the setup activates the Apply button. The changed setup is reflected on the device only if the Apply button or OK button is clicked.
  • Page 62 When using a scanner, the following message may be displayed. If this message appears, replace consumables following the instructions below. < If replacing consumables immediately > 1. Check [This message not display again.] 2. In cases where consumables are replaced after completing all documents being scanned, click [Ignore].
  • Page 63 is not generally required. The maximum size of changes depends on the device. ♦ Lamp timer Specify when the lamp turns off. This is the elapsed time after a scan is complete. ♦ Reset The settings in the tab folder are restored to their initial settings before the dialog box was displayed.
  • Page 64 Vertical Magnification correction − The Vertical magnification correction value of sub-scanning direction can be changed. For ADF scanning, the image is expanded or shrunk in the paper feeding direction based on the setting value at shipment. For FB scanning, the image is expanded or shrunk in the direction to which the scan head moves based on the setting value at shipment.

  • Page 65: Version Information Tab Folder

    Care must be taken when changing. 5.7 Version Information Tab Folder The version of this driver and a link to the Fujitsu home page are displayed. 5.8 Color Management Tab Folder Color profiles assigned to the device can be added or deleted from this folder.

Table of Contents