Vizio M512a-H6 User Manual page 22

Mode & Level Settings
Function
VIZIO Remote
VZtvRmt
Surround Sound
Surnd
Virtual:X
VRT :X
TruVolume
TruVol
Night Mode
Night
ENG - 22
LED Behavior
Remote On
SETUP > VZtvRmt > Use the Next/Previous buttons to enable/disable VIZIO TV
Remotes. When enabled (On), you can use a VIZIO TV remote control to turn on the sound
bar (using the TV Volume Up button) and control volume.
Remote Off
EFFECT > Surnd > Use the Next/Previous buttons to enable/disable surround sound and
front or dual modes. When enabled (On), Dolby and DTS Surround content will produce full
5.1 sound. With stereo content, EQ Music will produce DTS Virtual:X enhanced sound and
EQ Movie will produce realistic 5.1 effect sound. When disabled (Off), the surround speakers
will be disabled and the sound bar will only produce DTS Virtual sound effect.
Front - Use when placing surround speakers next to the sound bar. Refer to Proper
Placement - Front Surround Mode on page 18.
Dual - Both surround speakers will play the same left and right channel content as the
sound bar.
Note: With stereo content, if EQ mode is set to Direct and Surround is set to Off, the sound
bar will output 2.1 audio without center or surround.
Virtual:X On
EFFECT > VRT:X > Use the Next/Previous buttons to enable/disable Virtual:X. When
enabled (On), all inputs will produce a virtual sound technology that simulates the effect of
having overhead sound. When disabled (Off), all sources will playback without virtualization.
Virtual:X Off
EFFECT > TruVol > Use the Next/Previous buttons to enable/disable TruVolume. When
TruVolume On
enabled (On), TruVolume provides a consistent and comfortable volume level for a more
enjoyable listening experience.
TruVolume Off
Note: Default setting is Off
EFFECT > Night > Use the Next/Previous buttons to enable/disable Night Mode. When
Night Mode On
enabled (On), the sound bar will lower bass frequency levels to provide a more quiet
environment (ideal for apartment living and homes with sleeping children).
Night Mode Off
Note: Night mode will set to Off after a power cycle.
Description