Vizio M512a-H6 User Manual page 20

Mode & Level Settings
Function
Surround Balance
Surr Bal
Subwoofer Level
Subwoofer
AV Delay
AV Delay
Info
Info
Auto VA
Auto VA
Eco Power Mode
Eco Pwr
ENG - 20
LED Behavior
Two center LEDs indicate
LEVEL > Surr Bal > Use the Next/Previous buttons to increase/decrease the surround
surround balance is balance level on each side. The LED indicators will move to the top with balance levels to the
right and down with balance levels to the left.
centered.
LEVEL > Subwoofer > Use the Next/Previous buttons to increase/decrease the level
Two center LEDs
of the subwoofer. The LED indicators will move to the top with increasing level and to the
indicate subwoofer
bottom with decreasing level.
level is 0.
Note: Decreasing the level to the minimum turns off the subwoofer.
LED at the bottom
LEVEL > AV Delay > Use the Next/Previous buttons to increase/decrease the amount of
indicates no delay.
audio delay. The LED indicators will move to the top with increasing audio delay level.
SETUP > Info > OK to have the sound bar verbally announce the current sound bar input
—
and audio type being played with corresponding LED indicators.
SETUP > Auto VA > Use the Next/Previous buttons to toggle between connecting
the sound bar to a Voice Assistant through Bluetooth (BT), AUX, Both, or OFF. Refer to
Connecting to a Voice Assistant on page 27 for more information.
Note: Default setting is Both.
Eco Power Mode
SETUP > EcoPwr > Use the Next/Previous buttons to enable/disable Eco Power Mode.
On
When ON, the sound bar will go into standby after a period of inactivity. The sound bar will
automatically turn off when no audio signal is detected. Off disables this feature.
Eco Power Mode
Note: Default setting is Off
Off
Description