Vizio M512a-H6 User Manual page 21

Function LED Behavior
The LED indicator
Input Search
color will change
per specific input.
Input Srch
Program Remote
Flash from bottom
Learn
Prg Remote
Power LED
PwrLED
Reset Audio or
All LEDs will flash
Reset All
3 times when
settings are reset.
Reset All
Speaker Test
Spkr Test
SETUP > Input Search > OK to initiate an automatic input detection sequence. This is the
same as a long key press of the INPUT button on the remote. Specific inputs will show a
different LED color:
•
•
•
Waiting to learn:
SETUP > PrgRemote > Use the Next/Previous buttons and OK button to toggle and
select and program your TV remote to control the Volume Down, Volume Up, and Mute
functions on your sound bar. See the Programing the Sound Bar on page 24 section for
to top and back
more information.
continuously.
Power LED On
SETUP > PwrLED > Use the Next/Previous buttons and OK button to enable/disable the
Power LED.
Power LED Off
SETUP > Reset Audio or Reset All > Use the Next/Previous buttons to reset either Audio
or All settings. Press the OK button to select.
Audio - Only audio settings, such as bass and treble levels, will be reset.
All - All paired Bluetooth devices will be unpaired and all settings will be lost. All
programmed IR remotes will also be removed. See the Factory Reset on page 23 for
more information.
SETUP > Spkr Test > OK to activate the speaker test function. A voice will begin calling out
each speaker beginning with left front (Left Front, Center, Right Front, Right Rear, Left Rear,
—
and subwoofer-white noise). If any of these are missing, check the connection and run the
speaker test function again.
AUX In: Green
AUX VA: Violet
Digital Optical: Red
Mode & Level Settings
Description
• HDMI (ARC): Magenta
• Bluetooth: Blue
• USB: Orange
ENG - 21