Home >
Paper Handling
Change the Check Paper Size Setting
If this setting is set to [On] and you pull the paper tray out of the machine or load paper in the MP Tray, the LCD
displays a message asking if you want to change the Paper Size and Paper Type settings.
The default setting is [On].
1. Press
[Settings] > [All Settings] > [General Setup].
2. Press [Tray Setting].
3. Press a or b to display the [Check Paper] option, and then press it.
4. Press [On] or [Off].
5. Press
.
Related Information
•
Paper Settings
Related Topics:
•
Load A4, Letter, or Executive Size Paper in Tray #1
•
Load Photo Paper in Paper Tray #1
•
Load Envelopes in Paper Tray #1
•
Error and Maintenance Messages
>
Load Paper
>
Paper Settings
> Change the Check Paper Size Setting
45