Operation - Fujitsu AOY7FSAC Operating Manual

OPERATION

To Select Mode Operation
1 Press the START/STOP button (Fig.6 P).
The Indoor Unit's OPERATION Indicator lamp (red) (Fig. 3 6) will light.
The air conditioner will start operation.
Press the MASTER CONTROL button (Fig.6 K) to se-
2
lect the desired mode.
Each time the button is pressed, the mode will change in the following
order.
About three seconds later, the entire display will reappear.
To Set the Thermostat
Press the SET TEMP. buttons (Fig. 6 L).
button: Press to raise the thermostat setting.
button: Press to lower the thermostat setting.
G
Thermostat setting range:
AUTO .................................. Standard temperature setting ± 2 °C
Cooling/Dry ........................ 18 - 30 °C
FAN ..................................... 17 - 30 °C
(During use of FAN mode, if the thermostat is set at 17 °C or lower, the
display will show "--" and the fan will operate continuously, regard-
less of the room temperature).
About three seconds later, the entire display will reappear.
The thermostat setting should be considered a standard value, and may differ
somewhat from the actual room temperature.
To Set the Fan Speed
Press the FAN CONTROL button (Fig. 6 O).
Each time the button is pressed, the fan speed changes in the following order:
s AUTO s HIGH
About three seconds later, the entire display will reappear.
When set to AUTO:
Cooling : As the room temperature approaches that of the thermostat setting,
the fan speed becomes slower.
Fan : The fan will operate at the optimum speed in accordance with the
room temperature in the vicinity of the indoor unit.
When set to QUIET:
SUPER QUIET operation begins. The indoor unit's airflow will be reduced for qui-
eter operation.
G
SUPER QUIET operation cannot be used during Dry mode. (The same is true
when dry mode is selected during AUTO mode operation.)
G
Cooling performance will be reduced somewhat during SUPER QUIET opera-
tion.
To Stop Operation
Press the START/STOP button.
The OPERATION Indicator Lamp (red) (Fig. 3 6) will go out.
En-5
s AUTO s COOL
FAN t DRY
t
s MED s LOW s
Example: When set to COOL.
Example: When set to 26 °C.
QUIET
Example: When set to AUTO.