Operating Tips - Fujitsu AOY7FSAC Operating Manual

OPERATING TIPS

Operation and Performance
In Event of Power Interruption
AUTO Restart
G
The air conditioner power has been interrupted by a
power failure. The air conditioner will then restart auto-
matically in its previous mode when the power is restored.
G
Operated by setting before the power failure. Then, the
Air Flow Direction Louvers will automatically change to
their standard direction.
Temperature and Humidity Range
Outdoor temperature
Indoor temperature
G
If the air conditioner is used under higher temperature conditioner than those listed, the built-in protection circuit may
operate to prevent internal circuit damage. Also, during Cooling and Dry modes, if the unit is used under conditions of
lower temperature than those listed above, the heat-exchanger may freeze, leading to water leakage and other damage.
G
Do not use this unit for any purposes other than the Cooling, Dehumidifying, and air-circulation of rooms in ordinary
dwellings.
G
If the unit is used for long periods under high-humidity conditions, condensation may form on the surface of the indoor
unit, and drip onto the floor or other objects underneath. (About 80% or more)
G
If a power failure occurs during TIMER operation, the timer
will be reset and the unit will begin (or stop) operation at
the new time setting. In the event that this (kind of timer
fault occurs the TIMER Indicator Lamp (green) will flash
(See Page. 3).
G
Use of other electrical appliances (electric shaver, etc.) or
nearby use of a wireless radio transmitter may cause the
air conditioner to malfunction. In this event, temporarily
disconnect the Power Supply Plug, reconnect it, and then
use the Remote Control Unit to resume operation.
Cooling Mode
About 21-43 °C
About 18-32 °C
Dry Mode
About 21-43 °C
About 18-32 °C
En-14