Figure 3-3. Alert Box With Error Information; Figure 3-4. Hardware Verification Window After Unsuccessful Completion Of Tests - National Instruments PCMCIA-GPIB Getting Started

© National Instruments Corporation

Figure 3-3. Alert Box with Error Information

7. Record the error information. Whenever an Alert Box screen
appears, record the information before clicking on either Continue
or Stop. At the end of the program, if the hardware verification did
not complete successfully, the screen displays as shown in
Figure 3-4.

Figure 3-4. Hardware Verification Window after Unsuccessful Completion of Tests

8. If
IBDIAG PCMCIA
positioned securely in its socket and that no PCMCIA-GPIB cables
are connected. Run the
program still detects errors, refer to Appendix B, Troubleshooting,
for possible solutions.
9. Exit the
IBDIAG PCMCIA
menu.
fails, make sure that the PCMCIA-GPIB card is
IBDIAG PCMCIA
program by selecting Quit from the File
3-3
Chapter 3 Installation Verification
program again. If the
PCMCIA-GPIB for MacOS