Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
3-cell battery
4. Remove the
memory
module.
5. Remove the
M.2 2280 solid-state drive
6. Remove the
M.2 2230 solid-state drive
7. Remove the
wireless
card.
8. Remove the fan.
9. Remove the
coin-cell
10. Remove the
I/O
board.
11. Remove the
system
board.
NOTE:
The system board can be removed along with the heat sink.
12. Remove the
power-button with optional fingerprint
13. Remove the
power-adapter
14. Remove the speakers.
15. Remove the touchpad.
16. Remove the
display
assembly.
About this task
After performing the steps in the pre-requisites, you are left with the palm-rest and keyboard assembly.
60
Removing and installing components
Before working inside your
or
4-cell
battery, whichever applicable.
or
M.2 2230 solid-state drive
from M.2 slot two, if applicable.
battery.
port.
computer.
from M.2 slot one, whichever applicable.
reader.