Toyota PRIUS PLUG-IN HYBRID 2013 Manual
Toyota PRIUS PLUG-IN HYBRID 2013 Manual

Toyota PRIUS PLUG-IN HYBRID 2013 Manual

Hide thumbs Also See for PRIUS PLUG-IN HYBRID 2013:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Toyota PRIUS PLUG-IN HYBRID 2013

  • Page 3: Before Driving

    TABLE OF CONTENTS Information on the plug-in hybrid system and adjusting Before driving and operating features such as door locks, mirrors, and steering column When driving Driving, stopping and safe-driving information Interior Air conditioning and audio systems, as well as other in- features terior features for a comfortable driving experience Maintenance...
  • Page 4: Table Of Contents

    TABLE OF CONTENTS Index 1-4. Opening, closing and locking Before driving the doors Smart key system (with entry function) ..108 1-1. Plug-in hybrid system Smart key system Plug-in hybrid system (without entry function) ..126 features ......32 Wireless remote control..132 Plug-in hybrid system Side doors ......
  • Page 5 1-9. Safety information 2-3. Operating the lights and windshield wipers Correct driving posture..182 Headlight switch ....292 SRS airbags......184 Fog light switch....298 Front passenger occupant classification system ..198 Windshield wipers and washer......300 Child restraint systems..204 Rear window wiper and Installing child restraints..
  • Page 6 TABLE OF CONTENTS Index 3-4. Using the storage features Interior features List of storage features ..385 • Glove boxes ..... 386 • Console box ..... 387 3-1. Using the air conditioning • Cup holders ...... 388 system and defogger •...
  • Page 7: Maintenance And Care

    Maintenance and care When trouble arises 4-1. Maintenance and care 5-1. Essential information Cleaning and protecting Emergency flashers.... 524 the vehicle exterior.... 424 If your vehicle needs to be Cleaning and protecting towed........ 525 the vehicle interior..... 428 If you think something is wrong .......
  • Page 8 TABLE OF CONTENTS Index Vehicle specifications Index 6-1. Specifications Abbreviation list ....666 Maintenance data (fuel, oil level, etc.) ... 610 Alphabetical index.... 668 Fuel information ....621 Tire information ....625 What to do if..... 680 6-2. Customization Customizable features ..
  • Page 10 Pictorial index Exterior Outside rear view mirrors Windshield wipers P. 300 P. 169 Hood P. 442 Fuel filler door P. 174 Front turn signal lights P. 254 ∗ Daytime running lights Fog lights P. 298 (for the U.S.A.) P. 295 Daytime running lights (for Canada) and headlights P.
  • Page 11 Back door P. 140 ∗ Rear window wiper P. 304 Rear window defoggers P. 375 Charging port P. 73 Side doors P. 134 Tires ●Rotation P. 476 Camera ●Replacement P. 448 License plate lights P. 292 ●Inflation pressure P. 619 ●Information P.
  • Page 12 Pictorial index Interior Head restraints P. 152 Seat belts P. 156 SRS front passenger airbag P. 184 ∗ Cup holders P. 388 Glove boxes P. 386 ∗ Armrest P. 399 Rear seats P. 149 SRS side airbags P. 184 Front seats P.
  • Page 13 Sun visors P. 392 Front interior/personal lights P. 383 Microphone P. 415 Assist grips P. 400 Rear interior light P. 384 SRS curtain shield airbags P. 184 ∗ “SOS” button P. 415 Auxiliary box P. 391 Vanity mirrors P. 393 Anti-glare inside rear view mirror P.
  • Page 14 Pictorial index Interior Window lock switch P. 171 Door lock switch P. 134 Inside lock button P. 134 Power window switches P. 171...
  • Page 15 AUX port/USB port P. 381 Console box P. 387 Power outlet P. 395 Cup holders P. 388 : Refer to “Display Audio System Owner’s Manual” or “Navigation System Owner’s Manual”.
  • Page 16 Pictorial index Interior Seat heater switches P. 397 Power outlet P. 395 Auxiliary box P. 391...
  • Page 17 Pictorial index Instrument panel Windshield wipers and washer switch P. 300 SRS driver airbag P. 184 Rear window wiper and Horn P. 256 ∗ washer switch P. 304 Headlight switch P. 292 Gauges and meters P. 257 Turn signal lever Multi-information display P.
  • Page 18 Pictorial index Instrument panel Outside rear view mirror switches P. 169 ∗ Headlight cleaner switch P. 307 Fuel filler door opener P. 174 MPH or km/h button P. 259 Instrument panel light control dial P. 260 Hood lock release lever P.
  • Page 19 “TRIP” button P. 267, 273 Climate remote control switches P. 369 Audio remote “DISP” button P. 267 1, 2 control switches ∗ 1, 2 Talk switch Cruise control switch P. 308 Dynamic radar cruise control ∗ 1, 2 Telephone switches switch P.
  • Page 20 Pictorial index Instrument panel Clock adjustment buttons P. 275 Charging timer switch P. 86 ∗ Head-up display switches P. 285 Power (ignition) switch P. 238...
  • Page 21 Air conditioning system P. 358 Rear window and outside rear view mirror defoggers switch P. 375 Emergency flasher switch P. 524 EV/HV mode selection switch P. 37 Eco drive mode switch P. 247 Power mode switch P. 247 Shift lever P.
  • Page 22 Pictorial index Luggage compartment Luggage compartment light P. 141 Luggage cover P. 404 Auxiliary box Auxiliary box P. 403 P. 403 Cargo hooks P. 403...
  • Page 24 Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehi- cles are currently available in the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
  • Page 25 ● Anti-lock brake system ● SRS airbag system ● Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or spe- cial instructions regarding installation. High voltage parts and cables on the hybrid vehicles emit approximately the...
  • Page 26 ● Usage of data collected through Safety Connect (U.S. mainland only) If your Toyota has Safety Connect and if you have subscribed to those ser- vices, please refer to the Safety Connect Telematics Subscription Service Agreement for information on data collected and its usage.
  • Page 27 Event data recorder This vehicle is equipped with an event data recorder (EDR). The main pur- pose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed.
  • Page 28 ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehicle) is obtained • In response to an official request by the police, a court of law or a govern- ment agency •...
  • Page 29 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
  • Page 30 In the event that your vehicle must be disposed of, the hybrid battery (traction battery) must be disposed of by your Toyota dealer or a qualified service shop. If the hybrid battery (traction battery) is not disposed of properly, it may cause electric shock that...
  • Page 31 This is a warning against something which, if ignored, may cause damage to the vehicle or its equipment. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
  • Page 32 1-1. Plug-in hybrid system Plug-in hybrid system features ......32 Plug-in hybrid system precautions ...... 44 Energy monitor/ consumption screen..52 Plug-in hybrid vehicle driving tips......67 Plug-in Hybrid Applications ..... 70...
  • Page 33 Before driving 1-2. Charging 1-5. Adjustable components (seats, mirrors, steering Charging equipment... 73 wheel) Power sources that can be used ......... 77 Front seats ....... 146 How to charge....80 Rear seats......149 When normal charging Head restraints....152 cannot be carried out ..98 Seat belts ......
  • Page 34: Features

    1-1. Plug-in hybrid system Plug-in hybrid system features The plug-in hybrid system is a system that has the features of both electric vehicles and hybrid vehicles. ● Electricity received by charging from an external power source can be used, and the vehicle can also be driven as an electric vehicle by driving over certain distances using only the electric motor (traction motor).
  • Page 35 1-1. Plug-in hybrid system ■ When in EV mode Driving using only the electric motor (traction motor) is possible (excluding certain situations, such as when accelerating sud- denly), but if the amount of charge remaining in the hybrid bat- tery (traction battery) becomes low, EV mode will be canceled. In order to prolong EV mode driving, observe the following: ●...
  • Page 36 1-1. Plug-in hybrid system ■ When in HV mode The vehicle can be used in the same way as a standard hybrid vehicle. In HV mode, controls are primarily carried out as follows in accordance with the driving conditions. ● The gasoline engine stops when the vehicle is stopped. ●...
  • Page 37 1-1. Plug-in hybrid system Plug-in hybrid system control The plug-in hybrid system features both EV mode and HV mode, which are switched automatically. When a sufficient amount of elec- tricity is remaining in the hybrid battery (traction battery) the vehicle can be driven as an electric vehicle in EV mode;...
  • Page 38 1-1. Plug-in hybrid system ■ HV mode If only a little electricity is remain- ing in the hybrid battery (traction battery) and the vehicle cannot be driven using the electric motor (traction motor) only, the electric motor (traction motor) and the gasoline engine will be used together.
  • Page 39 1-1. Plug-in hybrid system EV/HV mode selection switch You can manually switch between EV mode and HV mode when you want to conserve battery power in preparation for EV driving in city areas. Switching to HV mode when driving on a highway or when driving uphill is recommended in order to conserve battery power.
  • Page 40 1-1. Plug-in hybrid system Charging (→P. 80) In order to drive in EV mode, charge the hybrid battery (trac- tion battery) from an external power source before using your vehicle. If there is not enough charge remaining in the hybrid battery (traction battery), the EV driving range will become shorter.
  • Page 41 1-1. Plug-in hybrid system ■ Regenerative braking In the following situations, kinetic energy is converted to electric energy and deceleration force can be obtained in conjunction with the recharging of the hybrid battery (traction battery). ● The accelerator pedal is released while driving with the shift position in D or B.
  • Page 42 1-1. Plug-in hybrid system ■ Refilling fuel Plug-in hybrid vehicles can be driven using electricity charged from an exter- nal power source, however the gasoline engine that is provided on board as an auxiliary power source and as a power source for driving in HV mode needs to be filled with fuel.
  • Page 43 1-1. Plug-in hybrid system ■ When continually using EV mode only After driving for approximately 124 miles (200 km) with the gasoline engine off, the gasoline engine may start for a short amount of time in order to pro- tect the system. ■...
  • Page 44 1-1. Plug-in hybrid system ■ Sounds and vibrations specific to a hybrid vehicle There may be no engine sounds or vibration even though the vehicle is able to move. For safety, apply the parking brake and make sure to shift the shift position to P when parked.
  • Page 45 ■ Maintenance, repair, recycling, and disposal Contact your Toyota dealer regarding maintenance, repair, recycling and dis- posal. Do not dispose of the vehicle yourself.
  • Page 46: Plug-In Hybrid System Precautions

    1-1. Plug-in hybrid system Plug-in hybrid system precautions Take care when handling the hybrid system, as it contains a high voltage system (about 650V at maximum) as well as parts that become extremely hot when the hybrid system is operating. Obey the caution labels attached to the vehicle.
  • Page 47 If the emergency shut off system activates, your vehicle will not restart. To restart the hybrid system, contact your Toyota dealer.
  • Page 48 If a warning light comes on, a warning message is displayed or the 12- volt battery is disconnected The hybrid system may not start. In that case, try to start the system again. If the “READY” indicator does not come on, contact your Toyota dealer. ■ Running out of fuel...
  • Page 49 1-1. Plug-in hybrid system ■ Electromagnetic waves ● High voltage parts and cables on the hybrid vehicles incorporate electro- magnetic shielding, and therefore emit approximately the same amount of electromagnetic waves as conventional gasoline powered vehicles or home electronic appliances. ●...
  • Page 50 1-1. Plug-in hybrid system CAUTION ■ High voltage precautions The vehicle has high voltage DC and AC systems as well as a 12-volt sys- tem. DC and AC high voltage is very dangerous and can cause severe burns and electric shock that may result in death or serious injury. ●...
  • Page 51 1-1. Plug-in hybrid system CAUTION ■ Road accident cautions If your vehicle is involved in an accident, observe the following precautions to reduce the risk of death or serious injury: ● Stop the vehicle in a safe place to prevent subsequent accidents. While depressing the brake pedal, apply the parking brake, shift the shift position to P and turn the hybrid system off.
  • Page 52 Do not replace, dispose of, modify, or reuse the hybrid battery (traction bat- tery) and do not use it for anything other than its intended use. Contact your Toyota dealer for replacement or disposal. If the hybrid battery (traction battery) is replaced, disposed of, modify or...
  • Page 53 Do not carry large amounts of water such as water cooler bottles in the vehicle. If water spills onto the hybrid battery (traction battery), the battery may be damaged. Have the vehicle inspected by your Toyota dealer. ● If the rear seat belt becomes separated from the guide (→P. 150), it could obstruct the hybrid battery (traction battery) air vent.
  • Page 54: Energy Monitor/Consumption Screen

    1-1. Plug-in hybrid system Energy monitor/consumption screen You can view the status of your hybrid system on the Display Audio system screen, the navigation system screen or the multi-informa- tion display. Display Audio system screen or navigation system screen Multi-information display Energy monitor Displays the flow of energy as it changes in accordance with driving conditions.
  • Page 55 1-1. Plug-in hybrid system Condition Display When the vehicle is powered by the electric motor (traction motor) When the vehicle is powered by both the gasoline engine and the electric motor (traction motor) When the vehicle is powered by the gasoline engine...
  • Page 56 1-1. Plug-in hybrid system Condition Display When the vehicle is charging the hybrid battery (traction battery) When there is no energy flow Full Hybrid battery (traction battery) status These images are examples only, and may vary slightly from actual conditions.
  • Page 57 1-1. Plug-in hybrid system Navigation system Press “INFO APPS” or “INFO”. STEP Touch “Fuel Consumption” on STEP the “Information” screen. If the “Consumption” screen is displayed, touch “Energy”.
  • Page 58 1-1. Plug-in hybrid system Condition Display When the vehicle is powered by the electric motor (traction motor) When the vehicle is powered by both the gasoline engine and the electric motor (traction motor) When the vehicle is powered by the gasoline engine...
  • Page 59 1-1. Plug-in hybrid system Condition Display When the vehicle is charging the hybrid battery (traction battery) When there is no energy flow Full Hybrid battery (traction battery) status These images are examples only, and may vary slightly from actual conditions.
  • Page 60 1-1. Plug-in hybrid system Multi-information display Press the “DISP” button to dis- play the energy monitor. ■ Names and meaning of each icons Gasoline engine Hybrid battery (traction bat- tery) Electric motor (traction motor) EV driving range Displays the approximate driving range using only the electric motor (traction motor) when in EV mode or when enough power is...
  • Page 61 1-1. Plug-in hybrid system Condition Display When the vehicle is powered by the electric motor (traction motor) The illustration shows the display when in EV mode. When the vehicle is powered by both the gasoline engine and the electric motor (traction motor) When the vehicle is powered by the gasoline engine When charging the hybrid bat-...
  • Page 62 1-1. Plug-in hybrid system Condition Display When there is no energy flow These images are examples only, and may vary slightly from actual conditions. ■ Hybrid battery (traction battery) status When driving in EV mode, the battery display will switch when the remaining charge display reaches one fifth of the total, and HV mode will be switched to when the level reaches 6 or below.
  • Page 63 1-1. Plug-in hybrid system Consumption screen Display Audio system Press “CAR”. If the “Energy Monitor” screen is displayed, touch “Consumption”. Fuel consumption in the past 30 minutes Cruising range (→P. 66) Regenerated energy in the past 30 minutes One symbol indicates 30 Wh. Up to 4 symbols are shown.
  • Page 64 1-1. Plug-in hybrid system Multi-information display Press the “DISP” button to dis- play the 5-minute or 1-minute fuel consumption display. Press and hold the “DISP” button to switch between 5-minute and 1-minute fuel consumption dis- plays. The display will alternate with each press of the button.
  • Page 65 1-1. Plug-in hybrid system EV indicator Eco Driving Indicator Light Average speed Average fuel consumption Use the displayed average fuel consumption as a reference. : →P. 268 :The current amount since the trip meter was reset will be displayed. These functions can be reset by pressing and holding the “TRIP”...
  • Page 66 1-1. Plug-in hybrid system Monthly fuel consumption record (multi-information display only) Press the “DISP” button to dis- play the monthly fuel consump- tion record. Displays the average fuel consumption for the previous 6 months. Average fuel consumption for the previous 6 months EV indicator Eco Driving Indicator Light Driving...
  • Page 67 1-1. Plug-in hybrid system ■ Remaining hybrid battery (traction battery) charge display The remaining charge display of the hybrid battery (traction battery) icon on the multi-information display switches in accordance with the remaining charge. (→P. 60) ■ Resetting the consumption data Display Audio system Selecting “Clear”...
  • Page 68 1-1. Plug-in hybrid system ■ Cruising range Displays the estimated distance that can be driven with the quantities of fuel and hybrid battery (traction battery) charge currently remaining. This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that dis- played.
  • Page 69: Plug-In Hybrid Vehicle Driving Tips

    1-1. Plug-in hybrid system Plug-in hybrid vehicle driving tips For economical and ecological driving, pay attention to the following points: ■ Using EV mode and HV mode effectively Primarily using EV mode when driving in cities and using HV mode when driving on highways (or freeways) can help con- serve fuel and electricity.
  • Page 70 1-1. Plug-in hybrid system ■ Highway driving Control your speed and keep at a constant speed. Also, before stopping at a toll booth or similar, allow plenty of time to release the accelerator and gently apply the brakes. A greater amount of electrical energy can be retained when slowing down.
  • Page 71 1-1. Plug-in hybrid system ■ Checking tire inflation pressure Make sure to check the tire inflation pressure frequently. If there is improper tire inflation pressure in the tires, the driving range when in EV mode will become shorter, and fuel consumption when in HV mode will increase.
  • Page 72: Plug-In Hybrid Applications

    ● Download of nearby charging stations to the map screen (Type A) ● View list of nearby charging stations and corresponding charging station information (such as voltage supported) (Type B) The function of Type B is a function added to Entune. For details about the function, refer to http://www.toyota.com/entune/.
  • Page 73 1-1. Plug-in hybrid system ■ Download of nearby charging stations to the map screen POI icons of charging stations can be displayed on the map screen. Their location can also be set as a destination and used for route guidance. Press “INFO APPS”.
  • Page 74 1-1. Plug-in hybrid system Touch “Show on Map” to display STEP nearby charging stations on the map screen. ■ To Hide POI icons Touch “Show on Map”. STEP Touch “Charging Station Icons”. STEP The map screen will be displayed with the POI icons hidden. To display the POI icons again, touch “Charging Station Icons”...
  • Page 75: Charging

    1-2. Charging Charging equipment This vehicle features equipment for connecting to an external power source. ■ Charging equipment and names Charging indicator Charging port Charging inlet Charging cable Charging port lid...
  • Page 76 1-2. Charging ■ The names of each part of the charging cable Charging connector Power indicator Latch release button Error warning indicator CCID (Charging Circuit Inter- Test button rupting Device) Reset button Plug : The shape of the plug differs in accordance with the voltage and the target region.
  • Page 77 1-2. Charging Safety functions The CCID (Charging Circuit Interrupting Device) has the following safety features. ■ Electrical leakage detection function If an electrical leakage is detected during charging, the power source will be automatically interrupted, thus preventing fires or electrical shocks caused by electrical leakage. If the power source is interrupted, the error warning indicator will illumi- nate.
  • Page 78 Do not attempt to disassemble or repair the charging cable, charging con- nector, plug or CCID (Charging Circuit Interrupting Device). If a problem arises with the charging cable or the CCID (Charging Circuit Interrupting Device), stop charging immediately and contact your Toyota dealer. ●...
  • Page 79: Power Sources That Can Be Used

    1-2. Charging Power sources that can be used An external power source that fulfills the following criteria is nec- essary for charging this vehicle. Confirm this before charging. ■ Power sources ● Connect to an AC 120 V outlet (NEMA 5-15R) with a Ground- Fault Circuit-Interrupter (GFCI) and a circuit breaker.
  • Page 80 1-2. Charging ■ The charging environment For safe charging, the following charging equipment and settings are recom- mended. ● Weatherproof outlet When charging outdoors, connect the plug to a weatherproof outlet, and ensure that the plug remains waterproof while the plug is connected. ●...
  • Page 81 1-2. Charging CAUTION ■ Power sources precautions Observe the following precautions. If you do not follow them, fire, electrical shock or damage may occur, possi- bly resulting in death or serious injury. ● Connect to an AC 120 V outlet (NEMA 5-15R) with a Ground-Fault Circuit- Interrupter (GFCI) and supplied by a circuit breaker per your local code.
  • Page 82: How To Charge

    1-2. Charging How to charge This vehicle has been designed to allow charging from an external power source using a charging cable for exclusive use with standard household AC outlets. However, the vehicle differs greatly from standard household electri- cal goods in the following ways, and incorrect usage could cause fire or electric shock, possibly leading to death or serious injury.
  • Page 83 1-2. Charging ■ How to charge Prepare the charging cable. STEP Insert the charging cable into STEP the outlet of the external power source. Make sure to hold the body of the plug and insert it firmly into the outlet. Check that the power indicator of the CCID (Charging Circuit Interrupting Device) is illumi-...
  • Page 84 If the error warning indicator does not come on even if the test button is pressed, it is likely that the function is not operating correctly. Stop charging immediately and con- tact your Toyota dealer.
  • Page 85 1-2. Charging Press the charging port lid to STEP open. The charging inlet light will illu- minate. Remove the charging connec- STEP tor cap. Affix the cap to the cable. Insert the charging connector STEP into the charging inlet. When inserting, make sure not to press the latch release but- ton.
  • Page 86 1-2. Charging Confirm that the charging indi- STEP cator is illuminated. (When the charging timer function is in use, the light will turn off sev- eral seconds after illuminat- ing.) Charging will not start if the charging indicator does not illu- minate when the charging con- nector is inserted.
  • Page 87 1-2. Charging ■ After charging Pull the charging connector STEP towards you while pressing the latch release button. If the charging connector is disconnected during charging (while the charging indicator is on), charging will be inter- rupted. Attach the charging connector STEP cap.
  • Page 88 1-2. Charging Remove the plug from the out- STEP let when the charging equip- ment will not be used for a prolonged period of time. Hold the body of the plug when removing. Make sure to put the cable away immediately after discon- necting.
  • Page 89 1-2. Charging ■ Setting the charging timer function Stop the vehicle and press the STEP charging timer switch. The multi-information display will switch to the charging timer dis- play. If not changing the set time: go to STEP Press and hold the charging STEP timer switch.
  • Page 90 1-2. Charging Adjust the set time using the time STEP adjustment button. (→P. 275) Adjust hours. Adjust minutes. Round to the nearest hour. : e.g. 1:00 to 1:29 → 1:00 1:30 to 1:59 → 2:00 Press and hold the charging STEP timer switch.
  • Page 91 1-2. Charging ■ Canceling the charging timer function If the charging timer switch is pressed while the charging timer indicator is illuminated or flash- ing, the charging timer function will be canceled. Charging will commence immediately if the charging cable is connected to the vehicle.
  • Page 92 1-2. Charging ■ Charging messages The first time the “POWER” switch is turned to ON mode after charging is completed, a message detailing the results of the charging will be displayed. Also, if an operation which can- not be carried out is attempted during charging, a warning mes- sage will be displayed.
  • Page 93 1-2. Charging ■ Safety functions ● The hybrid system will not start while the charging cable is attached to the vehicle, even if the “POWER” switch is operated. ● If the charging cable is connected while the “READY” indicator is illumi- nated, the hybrid system will stop automatically and driving will not be possible.
  • Page 94 1-2. Charging ■ Charging timer function (finish time setting mode) ● The finish time setting mode should only be used as a reference for the time at which charging will finish. Charging may not complete at the finish time depending on the effects of the electricity supply, temperature etc.
  • Page 95 1-2. Charging ■ Charging time may increase In the following situations, charging time may become longer than normal: ● In very hot or very cold temperatures. ● The vehicle is consuming a lot of electricity, for example, when the head- lights or emergency flashers switch is on.
  • Page 96 1-2. Charging CAUTION ■ When charging Follow these points when charging. If you do not follow them, fire or electri- cal shock may occur, possibly resulting in death or serious injury. ● Connect to a power source suitable for charging. (→P. 77) ●...
  • Page 97 1-2. Charging CAUTION ■ When charging ● When charging outdoors, make sure to connect to a weatherproof outlet for outdoor use. Also, if rain falls during charging, take care that rainwater does not run along the length of cable and enter the outlet. ●...
  • Page 98 In this event, stop charging immediately, remove the charging cable and contact your Toyota dealer. An accident may occur or damage may be inflicted if charging continues.
  • Page 99 1-2. Charging NOTICE ■ After charging ● After disconnecting the charging connector from the charging inlet, make sure to close the charging port lid. If the charging port lid is left open, water or foreign objects may enter the charging inlet, which could lead to vehicle damage. (The charging port lid does not have a lock.
  • Page 100: When Normal Charging Cannot Be Carried Out

    If charging does not commence even though the correct procedure has been carried out, and an error message is shown on the multi- information display, try the correction procedures listed in the table below. If you still cannot correct the problem, contact your Toyota dealer.
  • Page 101 Contact your building manager or an electrician. The charging cable connecting the CCID Stop charging immedi- (Charging Circuit Inter- ately, and contact your rupting Device) with Toyota dealer. the plug is damaged.
  • Page 102 Stop charging immediately and con- sult your Toyota dealer. The hybrid battery  (traction battery) is already fully charged.
  • Page 103 1-2. Charging Situation Reason Correction procedure Turn the “POWER” switch to ON mode and An error has probably The charging indicator comply with the warn- occurred in the charg- flashes for 10 seconds ing message shown on ing system. the multi-information display.
  • Page 104 ● If the error warning indicator illuminates again, there may be a problem with the charging cable or the power source. Stop charging immediately and contact your Toyota dealer.
  • Page 105: Inspecting The Charging Cable

    Check that the electrical leakage detection function operates properly by following the procedure below. In the unlikely event that the electrical leakage detection function does not operate properly, contact your Toyota dealer as soon as possible. Insert the charging cable into the outlet of the external power STEP source.
  • Page 106 1-2. Charging CAUTION ■ Routine inspection Check the following points regularly. If use is continued without inspection, fire or electric shock may occur, possibly resulting in death or serious injury. ● The charging cable, plug, charging connector, CCID (Charging Circuit Interrupting Device) etc.
  • Page 107: Key Information

    1-3. Key information Keys The following keys are provided with the vehicle. Electronic keys • Operating the smart key system (→P. 108, 126) • Operating wireless remote control function (→P. 132) • Operating the Remote Air Conditioning System (→P. 371) Mechanical keys Key number plate Using the mechanical key...
  • Page 108 Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a mechanical key is lost, a new key can be made at your Toyota dealer using the key number plate. (→P. 590) ■...
  • Page 109 Take your vehicle with all the electronic keys provided with your vehicle to your Toyota dealer. ■ When a vehicle key is lost If the key remains lost, the risk of vehicle theft increases significantly. Visit your Toyota dealer immediately with all remaining electronic keys that was provided with your vehicle.
  • Page 110: Opening, Closing And Locking

    1-4. Opening, closing and locking the doors Smart key system (with entry function) The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Unlocks and locks the side doors (→P.
  • Page 111 1-4. Opening, closing and locking the doors Unlocking and locking the doors Front door handles (including front passenger door handle if equipped with entry function) Grip the driver’s door handle to unlock the door. Grip the passen- ger’s door handle to unlock all the doors.
  • Page 112 1-4. Opening, closing and locking the doors Back door (vehicles with entry function of front and back doors) Press the unlock button to unlock all the doors. The doors cannot be unlocked for 3 seconds after the doors are locked. Press the lock button to lock all the doors.
  • Page 113 1-4. Opening, closing and locking the doors Antenna location and effective range ■ Antenna location Vehicles with entry function of driver’s door Antennas outside cabin Antennas inside cabin Vehicles with entry function of front and back doors Antennas outside the cabin Antennas inside the cabin Antenna outside the luggage compartment...
  • Page 114 1-4. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) Vehicles with entry function of driver’s door When locking or unlocking the door The system can be operated when the electronic key is within about 2.3 ft.
  • Page 115 1-4. Opening, closing and locking the doors ■ Operation signals A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) ■ When the door cannot be locked by the lock sensor on the upper part of the door handle If the door will not lock even when the topside sensor area is touched, try touch-...
  • Page 116 1-4. Opening, closing and locking the doors ■ Alarms and warning lights A combination of exterior and interior alarms as well as warning lights are used to prevent theft of the vehicle and accidents resulting from erroneous operation. Take appropriate measures in response to any warning message shown on the multi-information display.
  • Page 117 1-4. Opening, closing and locking the doors Alarm Situation Correction procedure The “POWER” switch was turned to ACCESSORY mode while the driver’s Interior alarm Turn the “POWER” door was open (or the pings continu- switch off and close driver’s door was opened ously the driver’s door while the “POWER”...
  • Page 118 1-4. Opening, closing and locking the doors Alarm Situation Correction procedure The electronic key has a Replace the electronic low battery key battery An attempt was made to Interior alarm start the hybrid system Start the hybrid sys- pings once without the electronic key tem with the elec- being present, or the elec-...
  • Page 119 1-4. Opening, closing and locking the doors ■ Security feature If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again. ■ Switching the door unlock function It is possible to set which doors the entry function unlocks. STEP Turn the “POWER”...
  • Page 120 1-4. Opening, closing and locking the doors ■ Battery-saving function The battery-saving function will be activated in order to prevent the elec- tronic key battery and the 12-volt battery from being discharged while the vehicle is not in operation for a long time. ●...
  • Page 121 1-4. Opening, closing and locking the doors ■ Conditions affecting operation The smart key system, wireless remote control and immobilizer system use weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system, wireless remote control and immobilizer system from operating properly.
  • Page 122 1-4. Opening, closing and locking the doors ■ Note for the entry function ● Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
  • Page 123 1-4. Opening, closing and locking the doors ■ Note for locking the doors ● Touching the door lock sensor while wearing gloves may delay or prevent lock operation. Remove the gloves and touch the lock sensor again. ● When the lock operation is performed using the lock sensor, recognition signals will be shown up to two consecutive times.
  • Page 124 1-4. Opening, closing and locking the doors ■ Note for the unlocking function ● A sudden approach to the effective range or door handle may prevent the doors from being unlocked. In this case, return the door handle to the original position and check that the doors unlock before pulling the door handle again.
  • Page 125 1-4. Opening, closing and locking the doors ■ If the smart key system does not operate properly ● Locking and unlocking the doors: Use the mechanical key. (→P. 591) Starting the hybrid system: →P. 592 ● ■ Electronic key battery depletion ●...
  • Page 126 1-4. Opening, closing and locking the doors ■ Certification for the smart key system For vehicles sold in the U.S.A. FCC ID: NI4TMLF8-2 FCC ID: HYQ14ACX FCC ID: HYQ14ADF FCC ID: HYQ13CZD FCC ID: HYQ13CZE NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 127 (→P. 111) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of emitting the radio waves.
  • Page 128: Smart Key System (Without Entry Function)

    1-4. Opening, closing and locking the doors Smart key system (without entry function) Starting and stopping the hybrid system can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.)
  • Page 129 1-4. Opening, closing and locking the doors Antenna location and effective range ■ Antenna location Antennas inside cabin ■ Effective range (areas within which the electronic key is detected) When starting the hybrid system or changing “POWER” switch modes The system can be operated when the electronic key is inside the vehicle.
  • Page 130 1-4. Opening, closing and locking the doors ■ Conditions affecting operation →P. 119 ■ Electronic key battery depletion →P. 123 ■ To operate the system properly Make sure to carry the electronic key when operating the system. Depending on the position and holding condition of the electronic key, the key may not be detected correctly and the system may not operate properly.
  • Page 131 1-4. Opening, closing and locking the doors ■ Alarms and warning indicators A combination of exterior and interior alarms are used to prevent theft of the vehicle and unforeseeable accidents resulting from erroneous operation. Take appropriate measures in response to any warning message shown on the multi-information display.
  • Page 132 1-4. Opening, closing and locking the doors Alarm Situation Correction procedure The electronic key has a Replace the electronic low battery key battery An attempt was made to Interior alarm start the hybrid system Start the hybrid sys- pings once without the electronic key tem with the elec- being present, or the elec-...
  • Page 133 1-4. Opening, closing and locking the doors ■ Certification for the smart key system For vehicles sold in the U.S.A. FCC ID: NI4TMLF8-2 FCC ID: HYQ14ACX FCC ID: HYQ14ADF FCC ID: HYQ13CZD FCC ID: HYQ13CZE NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 134: Wireless Remote Control

    1-4. Opening, closing and locking the doors Wireless remote control The wireless remote control can be used to lock and unlock the vehi- cle. Locks all the doors Unlocks all the doors Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors.
  • Page 135 1-4. Opening, closing and locking the doors ■ Panic mode When is pressed for longer than about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle. To stop the alarm, press any button on the electronic key.
  • Page 136: Side Doors

    1-4. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry function, wireless remote control or door lock switch. ■ Entry function (if equipped) →P. 108 ■ Wireless remote control →P. 132 ■...
  • Page 137 1-4. Opening, closing and locking the doors Locking the front doors from the outside without a key Move the inside lock button to the lock position. STEP Close the door. STEP The door cannot be locked if the “POWER” switch is in ACCESSORY or ON mode, or the electronic key is left inside the vehicle.
  • Page 138 1-4. Opening, closing and locking the doors Automatic door locking and unlocking systems The following functions can be set or canceled: Function Operation Shift position linked Shifting the shift position out of P locks all door locking function doors. Shift position linked Shifting the shift position to P unlocks all door unlocking function doors.
  • Page 139 1-4. Opening, closing and locking the doors Shift the shift position to P or N, STEP and press and hold the door lock switch ( ) for about 5 seconds then release. The shift position corresponding to the desired function to be set are shown as follows.
  • Page 140 1-4. Opening, closing and locking the doors ■ Using the mechanical key The doors can also be locked and unlocked with the mechanical key. (→P. 591) ■ If a wrong key is used The key cylinder rotates freely to isolate inside mechanism. ■...
  • Page 141 1-4. Opening, closing and locking the doors CAUTION ■ To prevent an accident Observe the following precautions while driving the vehicle. Failure to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. ●...
  • Page 142: Back Door

    1-4. Opening, closing and locking the doors Back door The back door can be locked/unlocked and opened by the following procedures. ■ Locking and unlocking the back door Entry function →P. 108 Wireless remote control →P. 132 Door lock switch →P.
  • Page 143 1-4. Opening, closing and locking the doors ■ Luggage compartment light The luggage compartment light turns on when the back door is opened with the luggage compartment light switch on. ■ If the back door opener is inoperative The back door can be unlocked from the inside. STEP Open the center deck board.
  • Page 144 1-4. Opening, closing and locking the doors CAUTION ■ Caution while driving ● Keep the back door closed while driving. If the back door is left open, it may hit near-by objects while driving or lug- gage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard.
  • Page 145 1-4. Opening, closing and locking the doors CAUTION ■ Operating the back door Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in death or serious injury. ● Remove any heavy loads, such as snow and ice, from the back door before opening it.
  • Page 146 If a bicycle carrier or similar heavy object is attached to the back door, it may suddenly shut again after being opened, causing someone’s hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended.
  • Page 147 Do not touch the damper stay rod with gloves or other fabric items. ● Damper stays Do not attach any accessories other than genuine Toyota parts to the back door. ● Do not place your hand on the damper stay or apply lateral forces to it.
  • Page 148: Adjustable Components

    1-5. Adjustable components (seats, mirrors, steering wheel) Front seats Manual seat (if equipped) Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (for driver’s side)
  • Page 149 1-5. Adjustable components (seats, mirrors, steering wheel) Power seat (if equipped for driver’s seat) Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch Vertical height adjustment switch Lumbar support adjustment switch Active head restraints When the occupant’s lower back presses against the seatback during a rear-end collision, the head restraint moves slightly for-...
  • Page 150 1-5. Adjustable components (seats, mirrors, steering wheel) ■ Active head restraints Even small forces applied to the seatback may cause the head restraint to move. Pushing up a locked head restraint forcibly may make the inner struc- ture of the head restraint appear. This does not indicate a problem. During rear-end collision...
  • Page 151: Rear Seats

    1-5. Adjustable components (seats, mirrors, steering wheel) Rear seats The seatbacks can be folded down. Before folding down the seatbacks Park the vehicle in a safe place. STEP Apply the parking brake firmly and shift the shift position to P. (→P.
  • Page 152 1-5. Adjustable components (seats, mirrors, steering wheel) Folding down the seatbacks Fold the seatback down while pushing the lock release button. To return the rear seatbacks to their original positions, lift them up until they lock. ■ Remove the seat belt from the guide If the seat belt interferes with luggage on the folded seats, remove the seat belt from the guide.
  • Page 153 1-5. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ When folding the seatbacks down Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not fold the seatbacks down while driving. ● Stop the vehicle on level ground, set the parking brake and shift the shift position to P.
  • Page 154: Head Restraints

    1-5. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for all seats. Front seats Pull the head restraints up. Down Push and hold the lock release button when lowering the head Lock restraint. release button Rear center seat Down Pull up or push down the head restraint while pressing the...
  • Page 155 1-5. Adjustable components (seats, mirrors, steering wheel) ■ Removing the head restraints Front and rear center seats Pull the head restraint up while pressing the lock release button. Lock release button Foldable type rear outside seats Pull the head restraint up while pressing the lock release buttons.
  • Page 156 1-5. Adjustable components (seats, mirrors, steering wheel) ■ Installing the head restraints Front and rear center seats Align the head restraint with the installa- tion holes and push it down to the lock position. Press and hold the lock release button Lock when lowering the head restraint.
  • Page 157 1-5. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. ● Use the head restraints designed for each respective seat. ●...
  • Page 158: Seat Belts

    1-5. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
  • Page 159 1-5. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the seat belt shoulder anchor height (front seats) Push the seat belt shoulder anchor down while pressing the release button. Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed until you hear a click.
  • Page 160 1-5. Adjustable components (seats, mirrors, steering wheel) Pre-collision seat belts (front seats of vehicles with pre-collision system) If the system determines that a collision is unavoidable, the front seat belts will retract before the collision. (→P. 335) ■ Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact.
  • Page 161 ■ Seat belt extender If your seat belts cannot be fastened securely because they are not long enough, personalized seat belt extender is available from your Toyota dealer free of charge.
  • Page 162 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●...
  • Page 163 1-5. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Pregnant women Obtain medical advice and wear the seat belt in the proper way. (→P. 156) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occu- pants.
  • Page 164 ● If the pretensioner has activated, the SRS warning light will come on. In that case, the seat belt cannot be used again and must be replaced at your Toyota dealer. ■ Adjustable shoulder anchor Always make sure the shoulder belt is positioned across the center of your shoulder.
  • Page 165 ● Ensure that the belt and plate are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there’s no obvious damage.
  • Page 166 1-5. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Using a seat belt extender ● Do not wear the seat belt extender if you can fasten the seat belt without the extender. ● Do not use the seat belt extender when installing a child restraint system because the belt will not securely hold the child restraint system, increas- ing the risk of death or serious injury in the event of an accident.
  • Page 167: Steering Wheel

    1-5. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and STEP push the lever down. Adjust to the ideal position by STEP moving the steering wheel horizontally and vertically.
  • Page 168: Inside Rear View Mirror

    1-5. Adjustable components (seats, mirrors, steering wheel) Inside rear view mirror The rear view mirror’s position can be adjusted to enable sufficient confirmation of the rear view in accordance with the driver’s seating posture. Adjusting the height of rear view mirror Adjust the height of the rear view mirror by moving it up and down.
  • Page 169 1-5. Adjustable components (seats, mirrors, steering wheel) Auto anti-glare inside rear view mirror (without garage door opener) Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced. Changing automatic anti-glare function mode ON/OFF When the automatic anti-glare function is in ON mode, the indi-...
  • Page 170 1-5. Adjustable components (seats, mirrors, steering wheel) ■ To prevent sensor error (vehicles with auto anti-glare inside rear view mirror) Without garage door opener To ensure that the sensors operate prop- erly, do not touch or cover them. With garage door opener CAUTION ■...
  • Page 171: Outside Rear View Mirrors

    1-5. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch. To select a mirror to adjust, STEP press the switch. Left Right To adjust the mirror, press the STEP switch. Right Down Left Folding the mirrors...
  • Page 172 1-5. Adjustable components (seats, mirrors, steering wheel) ■ Mirror angle can be adjusted when The “POWER” switch is in ACCESSORY or ON mode. ■ When the mirrors are fogged up (vehicles with outside rear view mirror defoggers) The outside rear view mirrors can be cleared using the mirror defoggers. Turn on the rear window defogger to turn on the outside rear view mirror defoggers.
  • Page 173: Opening And Closing The

    1-6. Opening and closing the windows Power windows The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: One-touch closing Closing One-touch opening Opening : To stop the window partway, operate the switch in the oppo- site direction.
  • Page 174 If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after perform- ing the above procedure correctly, have the vehicle inspected by your Toyota dealer.
  • Page 175 1-6. Opening and closing the windows ■ Customization The one-touch closing operation can be disabled, except for the driver’s seat. (Customizable features →P. 639) CAUTION ■ Closing the windows Observe the following precautions. Failing to do so may result in death or serious injury. ●...
  • Page 176: Refueling Opening The Fuel Tank Cap

    1-7. Refueling Opening the fuel tank cap The fuel tank of your vehicle has a special structure, which requires a reduction in fuel tank pressure before refueling. After the opener switch has been pressed, it will take several seconds until the vehi- cle is ready for refueling.
  • Page 177 1-7. Refueling Turn the fuel tank cap slowly STEP to open. Hang the fuel tank cap on the STEP back of the fuel filler door. Closing the fuel tank cap After refueling, turn the fuel tank cap until you hear a click. Once the cap is released, it will turn slightly in the opposite direction.
  • Page 178 ■ If the fuel filler door opener is inoperable If the fuel filler door opener switch cannot be operated, contact your Toyota dealer. In the event that urgent refueling is required, follow the procedure below. Open the fuel filler door using the lever in STEP the luggage compartment.
  • Page 179 Do not top off the fuel tank ■ When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
  • Page 180 1-7. Refueling NOTICE ■ Refueling ● Finish refueling within 30 minutes. If more than 30 minutes passes, the internal valve closes. In this condition, fuel may spill out if you continue to refuel the vehicle. About 5 minutes after the valve is closed, a message “CLOSE FUEL LID”...
  • Page 181: Theft Deterrent System

    1-8. Theft deterrent system Immobilizer system The vehicle’s keys have built-in transponder chips that prevent the hybrid system from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. The indicator light flashes after the “POWER”...
  • Page 182 1-8. Theft deterrent system ■ Certifications for the immobilizer system For vehicles sold in the U.S.A. FCC ID: NI4TMIMB-1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 183 1-8. Theft deterrent system NOTICE ■ To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guar- anteed.
  • Page 184: Safety Information

    1-9. Safety information Correct driving posture Drive with a good posture as follows: Sit upright and well back in the seat. (→P. 146) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
  • Page 185 1-9. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver’s seat. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.
  • Page 186: Srs Airbags

    1-9. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. SRS front airbags SRS driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas-...
  • Page 187 1-9. Safety information SRS side and curtain shield airbags SRS side airbags Can help protect the torso of the front seat occupants SRS curtain shield airbags Can help protect primarily the head of occupants in the outer seats...
  • Page 188 1-9. Safety information SRS airbag system components Front passenger airbag Side impact sensors (front) “AIR BAG ON” and “AIR BAG Seat belt pretensioners and OFF” indicator lights force limiters Side airbags Driver’s seat belt buckle switch Curtain shield airbags Driver’s seat position sensor Front passenger occupant classification system (ECU...
  • Page 189 1-9. Safety information Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on infor- mation obtained from the sensors etc. shown in the system compo- nents diagram above.
  • Page 190 1-9. Safety information ■ SRS airbag deployment conditions (SRS front airbags) ● The SRS front airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to an approxi- mately 12 - 18 mph [20 - 30 km/h] frontal collision with a fixed wall that does not move or deform).
  • Page 191 1-9. Safety information ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. ●...
  • Page 192 Vehicle rollover ■ When to contact your Toyota dealer In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. ● Any of the SRS airbags has been inflated. ● The front of the vehicle is damaged or...
  • Page 193 1-9. Safety information ● A portion of a door is damaged or deformed, or the vehicle was involved in an accident that was not severe enough to cause the SRS side and cur- tain shield airbags to inflate. ● The pad section of the steering wheel, dashboard near the front passenger air- bag or lower portion of the driver’s side instrument panel is scratched, cracked,...
  • Page 194 1-9. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly.
  • Page 195 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are...
  • Page 196 1-9. Safety information CAUTION ■ SRS airbag precautions ● Do not sit on the edge of the seat or lean against the dashboard. ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger.
  • Page 197 1-9. Safety information CAUTION ■ SRS airbag precautions ● Do not attach anything to or lean any- thing against areas such as the dash- board, steering wheel pad and lower portion of the instrument panel. These items can become projectiles when the SRS driver, front passenger and knee airbags deploy.
  • Page 198 If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. ● Do not place anything, such as a cushion, on the front passenger’s seat.
  • Page 199 Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
  • Page 200: Front Passenger Occupant Classification System

    1-9. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for the front passenger.
  • Page 201 1-9. Safety information Condition and operation in the front passenger occupant classification system ■ Adult “AIR BAG ON” and “AIR BAG OFF” “AIR BAG indicator lights ON” Indicator/ SRS warning light warning light Front passenger’s seat belt reminder light Flashing Front passenger airbag Side airbag on the front passenger seat Devices...
  • Page 202 1-9. Safety information ■ Unoccupied “AIR BAG ON” and “AIR BAG OFF” Not illuminated indicator lights Indicator/ warning light SRS warning light Front passenger’s seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seat Devices Activated Curtain shield airbag in the front passen- ger side...
  • Page 203 1-9. Safety information : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may rec- ognize him/her as a child depending on his/her physique and pos- ture.
  • Page 204 1-9. Safety information CAUTION ■ Front passenger occupant classification system precautions Observe the following precautions regarding front passenger occupant clas- sification system. Failure to do so may cause death or serious injury. ● Wear the seat belt properly. ● Make sure the front passenger’s seat belt plate has not been left inserted into the buckle before someone sits in the front passenger seat.
  • Page 205 Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not contact the front seatbacks.
  • Page 206: Child Restraint Systems

    1-9. Safety information Child restraint systems A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.
  • Page 207 1-9. Safety information Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child. Rear facing  Infant seat/convertible seat Forward facing  Convertible seat Booster seat...
  • Page 208 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
  • Page 209 1-9. Safety information CAUTION ■ Child restraint precautions ● Never install a rear-facing child restraint system on the front passenger seat even if the “AIR BAG OFF” indicator light is illuminated. In the event of an accident, the force of the rapid inflation of the front passenger airbag can cause death or serious injury to the child if the rear-facing child restraint system is installed on the front passenger seat.
  • Page 210 1-9. Safety information CAUTION ■ When children are in the vehicle Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious injuries that could result in death.
  • Page 211: Installing Child Restraints

    1-9. Safety information Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Chil- dren) system.
  • Page 212 1-9. Safety information Installation with LATCH system Widen the gap between the seat cushion and seatback STEP slightly. Type A Latch the hooks of the lower STEP straps onto the LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor.
  • Page 213 1-9. Safety information Type B Latch the buckles onto the STEP LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system.
  • Page 214 1-9. Safety information Installing child restraints using a seat belt (child restraint lock function belt) Rear facing  Infant seat/convertible seat ■ Place the child restraint system STEP on the rear seat facing the rear of the vehicle. Run the seat belt through the STEP child restraint system and insert the plate into the buckle.
  • Page 215 1-9. Safety information While pushing the child restraint STEP system down into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
  • Page 216 1-9. Safety information Fully extend the shoulder belt STEP and then allow it to retract slightly in order to activate the ALR lock mode. Lock mode allows the seat belt to retract only. While pushing the child restraint STEP system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place.
  • Page 217 1-9. Safety information ■ Booster seat Place the child restraint system STEP on the seat facing the front of the vehicle. Sit the child in the child restraint STEP system. Fit the seat belt to the child restraint system according to the manufacturer’s instruc- tions and insert the plate into the buckle.
  • Page 218 1-9. Safety information Removing a child restraint installed with a seat belt Press the buckle release button and fully retract the seat belt. Child restraint systems with a top tether strap Secure the child restraint system using a seat belt or the STEP LATCH anchors, and do the following.
  • Page 219 1-9. Safety information Non-foldable type outside seats Remove the head restraint. Center seat Adjust the head restraint to the upmost position.
  • Page 220 1-9. Safety information Open the anchor bracket cover, STEP latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched. Outside only: Do the following. STEP Foldable type Adjust the head restraint to the downmost position.
  • Page 221 1-9. Safety information ■ Laws and regulations pertaining to anchors The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifica- tions can be used. This vehicle is designed to conform to the SAE J1819. CAUTION ■...
  • Page 222 1-9. Safety information CAUTION ■ When installing a child restraint system ● Only put a forward-facing child restraint system on the front seat when unavoid- able. When installing a forward-facing child restraint system on the front passenger seat, move the seat as far back as pos- sible even if the “AIR BAG OFF”...
  • Page 223 1-9. Safety information CAUTION ■ Do not use a seat belt extender If a seat belt extender is used when installing a child restraint system, the seat belt will not securely hold the child restraint system, which could cause death or serious injury to the child or other passengers in the event of sud- den braking, sudden swerving or an accident.
  • Page 224 1-9. Safety information...
  • Page 225: When Driving

    When driving 2-1. Driving procedures 2-3. Operating the lights and windshield wipers Driving the vehicle.... 224 Headlight switch....292 Power (ignition) switch ..238 Fog light switch ....298 Hybrid transmission ..245 Windshield wipers and Turn signal lever ....254 washer ......
  • Page 226: Driving Procedures

    2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing: ■ Before starting the hybrid system Check that the charging cable is disconnected. (→P. 91) ■ Starting the hybrid system →P. 238 ■ Driving With the brake pedal depressed, shift the shift position to D.
  • Page 227 2-1. Driving procedures ■ Parking the vehicle Stop the vehicle completely. STEP Set the parking brake. (→P. 255) STEP Shift the shift position to P. (→P. 248) STEP Check that the shift position indicator shows P. (→P. 245) Press the “POWER” switch to stop the hybrid system. STEP Slowly release the brake pedal.
  • Page 228 ■ Breaking in your new Toyota To extend the life of the vehicle, observing the following precautions is rec- ommended: ●...
  • Page 229 2-1. Driving procedures ■ Operating your vehicle in a foreign country Comply with the relevant vehicle registration laws and confirm the availability of the correct fuel. (→P. 613) ■ For efficient use ● Shift the shift position to D when driving. In the N position, the gasoline engine operates but electricity cannot be generated.
  • Page 230 2-1. Driving procedures CAUTION ■ When starting the vehicle Always keep your foot on the brake pedal while stopped with the hybrid sys- tem operating. This prevents the vehicle from creeping. ■ When driving the vehicle ● Do not drive if you are unfamiliar with the location of the brake and accel- erator pedals to avoid depressing the wrong pedal.
  • Page 231 Large amounts of exhaust in the vehi- cle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immediately. ●...
  • Page 232 2-1. Driving procedures CAUTION ● Do not adjust the positions of the steering wheel, the seat, or the inside or outside rear view mirrors while driving. Doing so may result in a loss of vehicle control that can cause accidents, resulting in death or serious injury.
  • Page 233 If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have your Toyota dealer check and replace the brake pads as soon as pos- sible. Rotor damage may result if the pads are not replaced when needed.
  • Page 234 2-1. Driving procedures CAUTION ■ When the vehicle is stopped ● Do not depress the accelerator pedal unnecessarily. If the vehicle is in any shift position other than P or N, the vehicle may accelerate suddenly and unexpectedly, causing an accident. ●...
  • Page 235 2-1. Driving procedures CAUTION ■ When the vehicle is parked ● Make sure to firmly apply the parking brake and shift the shift position to P. Failure to do so may cause the vehicle to move, or the vehicle to acceler- ate suddenly if the accelerator pedal is accidentally depressed.
  • Page 236 The exhaust system should be checked occasionally. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in...
  • Page 237 If this happens, do not continue to drive the vehicle. If the brake system warning light (red indicator) comes on while driving, immediately stop the vehicle in a safe place and contact your Toyota dealer.
  • Page 238 2-1. Driving procedures NOTICE ■ When driving the vehicle ● Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain driving torque. ● Do not use the accelerator pedal or depress the accelerator and brake pedals at the same time to hold the vehicle on a hill.
  • Page 239 Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: ● Brake function ●...
  • Page 240: Power (Ignition) Switch

    2-1. Driving procedures Power (ignition) switch Performing the following operations when carrying the electronic key on your person starts the hybrid system or changes “POWER” switch modes. ■ Starting the hybrid system Check that the charging cable is disconnected. ( →...
  • Page 241 2-1. Driving procedures Check that the “READY” indicator is on. STEP If the “READY” indicator changes from a flashing light to a solid light and the buzzer sounds, the hybrid system is starting nor- mally. The vehicle will not move when the “READY” indicator is off. The vehicle can move when the “READY”...
  • Page 242 2-1. Driving procedures ■ Changing “POWER” switch modes Modes can be changed by pressing the “POWER” switch with the brake pedal released. (The mode changes each time the switch is pressed.) The emergency flashers can be used. ACCESSORY mode Some electrical components such as the audio system can be used.
  • Page 243 Notes for the entry function →P. 120 ■ If the hybrid system does not start ● The immobilizer system may not have been deactivated. (→P. 179) Contact your Toyota dealer. ● The charging cable may be connected to the vehicle. (→P. 91)
  • Page 244 If the “READY” indicator does not come on If the “READY” indicator does not come on when you press the “POWER” switch with the shift position in P and the brake pedal depressed, contact your Toyota dealer immediately. ■ If the hybrid system is malfunctioning →P.
  • Page 245 When the P position control system malfunctions The “POWER” switch will not be able to be turned off. In such a case, the switch can be turned off after applying the parking brake. Have the vehicle inspected by your Toyota dealer immediately. ■ Ending display When the “POWER”...
  • Page 246 “POWER” switch is off. ■ Symptoms indicating a malfunction with the “POWER” switch If the “POWER” switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction. Con- tact your Toyota dealer immediately.
  • Page 247: Hybrid Transmission

    2-1. Driving procedures Hybrid transmission Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever Shift lever Operate the shift lever gently and ensure correct shifting operation. When shifting to the D or R positions, move the shift lever along the shift gate.
  • Page 248 2-1. Driving procedures Shift position indicator The position of the frame on the shift position indicator changes in accordance with the current shift position. When any shift position other than D or B is selected, the arrow toward B and B position indicator disappear from the shift position indicator. When selecting the shift position, make sure that the shift position has been changed to the desired position by checking the shift position indica- tor provided on the instrument cluster.
  • Page 249 2-1. Driving procedures ■ Selecting a driving mode The following modes can be selected to suit driving conditions: Eco drive mode Suitable for improving the fuel economy, because the torque cor- responding to the accelerator pedal depression amount can be generated more smoothly than it is in normal conditions and the operation of the air conditioning system (heating/cooling) will be minimized.
  • Page 250 2-1. Driving procedures P position switch ■ When shifting the shift position to P Fully stop the vehicle and set the parking brake, and then press the P position switch. When shift position changed to P, the indicator comes Check that the P position is illumi- nated on the shift position indica- tor.
  • Page 251 2-1. Driving procedures ■ Operation of the air conditioning system in Eco drive mode Eco drive mode controls the heating/cooling operations and fan speed of the air conditioning system to enhance fuel efficiency. (→P. 247) To improve air conditioning performance, adjust the fan speed or turn off Eco drive mode. ■...
  • Page 252 2-1. Driving procedures ● Situations where the shift position will automatically change to N: • When the P position switch is pressed while the vehicle is running. • When an attempt is made to select the R position by moving the shift lever when the vehicle is moving forward.
  • Page 253 2-1. Driving procedures ■ About engine braking When shift position B is selected, releasing the accelerator pedal will apply engine braking. ● When the vehicle is driven at high speeds, compared to ordinary gaso- line-fueled vehicles, the engine braking deceleration is felt less than that of other vehicles.
  • Page 254 ■ For the shift lever Do not remove the shift lever knob or use anything but a genuine Toyota shift lever knob. Also, do not hang anything on the shift lever. Doing so could prevent the shift lever from returning to position, causing unexpected accidents to occur when the vehicle is in motion.
  • Page 255 If any of the following situations occurs, P position control system malfunc- tions are possible. Immediately stop the vehicle in a safe place on level ground, apply the park- ing brake, and then contact your Toyota dealer. ● When the “P LOCK MALFUNCTION” warning message appears on the multi-information display.
  • Page 256: Turn Signal Lever

    2-1. Driving procedures Turn signal lever The turn signal lever can be used to show the following intention of the driver: Right turn Left turn Lane change to the right (push and hold the lever partway) The right hand signals will flash until you release the lever.
  • Page 257: Parking Brake

    2-1. Driving procedures Parking brake To set the parking brake, fully depress the parking brake pedal with your left foot while U.S.A. Canada depressing the brake pedal with your right foot. (Depressing the pedal again releases the parking brake.) ■ Parking brake engaged warning buzzer →P.
  • Page 258: Horn

    2-1. Driving procedures Horn To sound the horn, press on or close to the mark. ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (→P.
  • Page 259: Instrument Cluster Gauges And Meters

    2-2. Instrument cluster Gauges and meters The units used on the display may differ depending on the target region. The following gauges and meters and display illuminate when the “POWER” switch is in ON mode: Fuel gauge Displays the quantity of fuel remaining in the tank. Speedometer Displays the vehicle speed.
  • Page 260 2-2. Instrument cluster Touch tracer display (if equipped) When the audio control switches, climate control switches, “DISP” button or “TRIP” button of the steering wheel are touched, the touch tracer display will appear in front of the gauges, with the touched button highlighted to allow the driver to identify the button that is being operated.
  • Page 261 2-2. Instrument cluster MPH or km/h button The speed units can be selected MPH or km/h. Press the button to switch the display between MPH and km/h.
  • Page 262 2-2. Instrument cluster Instrument panel light control When the headlight switch is turned on while the surrounding area is dark, the brightness of the instrument panel lights can be adjusted by turning the dial. Brighter Darker ■ Brightness of the instrument panel light ●...
  • Page 263 2-2. Instrument cluster CAUTION ■ To prevent an accident Do not place anything or attach a sticker Instrument cluster in front of the instrument cluster. The item may obscure or obstruct the display, or could reflect off the display, possibly causing an accident.
  • Page 264: Indicators And Warning Lights

    2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and instrument panel inform the driver of the status of the vehicle’s vari- ous systems. For the purpose of explanation, the following illustration displays all indicators and warning lights illuminated.
  • Page 265 2-2. Instrument cluster ■ Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Eco Driving Indicator (→P. 254) Light (→P. 268) Headlight indicator “ECO MODE” (→P. 292) indicator (→P. 247) (U.S.A.) Tail light indicator Power mode indicator (→P.
  • Page 266 Have the vehicle inspected by your Toyota dealer. : The light flashes to indicate that the system is operating.
  • Page 267 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer.
  • Page 268: Multi-Information Display

    2-2. Instrument cluster Multi-information display The multi-information display presents the driver with a variety of driving-related data, including the clock. ● Energy monitor (→P. 52) ● Hybrid System Indicator (→P. 268) ● EV driving ratio indicator (→P. 271) ● 5-minute/1-minute fuel consumption (→P. 61) ●...
  • Page 269 2-2. Instrument cluster Switching the display To switch the display, press “DISP” button. On vehicles with touch tracer dis- play, the steering switches opera- tion status is displayed on the instrument cluster for confirma- tion purposes. (→P. 258) To switch the odometer, trip meter and distance to empty, press “TRIP”...
  • Page 270 2-2. Instrument cluster Hybrid System Indicator Hybrid System Indicator displays the hybrid system operating condi- tion and provides Eco-friendly driving assistance in accordance with the driving conditions and the acceleration. ■ Names and meaning of each icons When EV Mode Hybrid battery (traction bat- tery) status (→P.
  • Page 271 2-2. Instrument cluster ■ Reading Hybrid System Indicator When EV Mode Charge area EV driving area Power area As shown below, the driving conditions of the vehicle can be con- firmed by checking the status of the indicator bar. Multi-information display Charge area: Shows that energy is being recovered via the regenera-...
  • Page 272 2-2. Instrument cluster When HV Mode Charge area Eco area Power area Hybrid Eco area As shown below, the driving conditions of the vehicle can be con- firmed by checking the status of the indicator bar. Hybrid System Indicator Charge area: Shows regenerative charging.
  • Page 273 2-2. Instrument cluster EV driving ratio indicator The ratio of the distance driven using only power charged from an external power source against other driving conditions is displayed on the EV driving ratio screen. Two separate EV driving ratios can be used: EV driving ratio (1) and EV driving ratio (2).
  • Page 274 2-2. Instrument cluster ■ Meaning of each icons Percentage driven in EV mode using the electric motor (trac- tion motor) only The percentage is shown as a green bar. Percentage driven in EV mode jointly using gasoline engine and in HV mode The percentage is shown as a red bar.
  • Page 275 2-2. Instrument cluster ■ Resetting the data Press and hold the “TRIP” button while the screen you want to reset is being displayed. The bar display, percent display, driving distance, electricity con- sumption and fuel consumption will be reset. Odometer/trip meter/distance to empty ■...
  • Page 276 2-2. Instrument cluster ■ Display items ● Odometer Displays the total distance the vehicle has been driven. ● Trip meter Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different dis- tances independently.
  • Page 277 2-2. Instrument cluster Clock The clock can be adjusted by pressing the buttons. Adjusts the hours. Adjusts the minutes. Rounds to the nearest hour. : e.g. 1:00 to 1:29 → 1:00 1:30 to 1:59 → 2:00 Setting up the displays Press the “DISP”...
  • Page 278 2-2. Instrument cluster ■ Setting the calendar Select “CALENDAR”. STEP Press and hold the “DISP” button to enter the setting mode. Select the date by pressing the STEP “DISP” or “TRIP” button. Press and hold the button to change the date continuously. If neither button is operated for approximately 5 seconds, the set- ting will be changed and the...
  • Page 279 2-2. Instrument cluster ■ Switching the EV indicator and Eco Driving Indicator Light activated or deactivated Select “EV/ECO”. STEP Press and hold the “DISP” button to enter the setting mode. Select “ON” or “OFF”. STEP Press and hold the “DISP” button to finish setting.
  • Page 280 2-2. Instrument cluster ■ Switching the steering switch operation display on/off (if equipped) Select “STEERING SWITCH”. STEP Press and hold the “DISP” button to enter the setting mode. Select “ON” or “OFF”. STEP Press and hold the “DISP” button to finish setting.
  • Page 281 2-2. Instrument cluster ■ Selecting 12h/24h clock display Select “CLOCK”. STEP Press and hold the “DISP” button to enter the setting mode. Select “12h” or “24h”. STEP Press and hold the “DISP” button to finish setting.
  • Page 282 2-2. Instrument cluster ■ Selecting the language Select “LANGUAGE”. STEP Press and hold the “DISP” button to enter the setting mode. Select the language you want to STEP read. Press and hold the “DISP” button to set the language.
  • Page 283 2-2. Instrument cluster ■ Turning off the multi-information display Select “SCREEN OFF”. STEP Press and hold the “DISP” button to enter the setting mode. Select “OFF”. STEP Press and hold the “DISP” button to turn off the multi-information display. To re-display the multi-information display, press the “DISP”...
  • Page 284 2-2. Instrument cluster ■ System check display After switching the “POWER” switch to ON mode, “welcome to PRIUS” is dis- played while system operation checked. When the system check is com- plete, the normal screen will return. ■ Ending display →P.
  • Page 285 2-2. Instrument cluster ■ Driving in Eco drive mode The multi-information display will automatically switch the display to Hybrid System Indicator, regardless of which display is currently being shown. (→P. 268) ■ Touch tracer display (if equipped) ● The touch tracer display can be set to not display even if the steering switches are touched.
  • Page 286 2-2. Instrument cluster ■ Vacuum fluorescent display Small spots or light spots may appear on the display. This phenomenon is characteristic of vacuum fluorescent displays, and there is no problem to continue using the display. NOTICE ■ Steering switches To prevent damage to the steering switches, observe the following precau- tions.
  • Page 287: Head-Up Display

    2-2. Instrument cluster ∗ Head-up display The head-up display can be used to project vehicle speed and other information onto the windshield. Head-up display Display brightness will change automatically according to the brightness of the surrounding area. (Head-up display) main switch Turn-by-turn navigation switch (if equipped)
  • Page 288 2-2. Instrument cluster ■ Head-up display contents ● Speedometer Displays the vehicle speed. ● Hybrid System Indicator Provides assistance for Eco-friendly driving. ● Turn-by-turn navigation Displays a notification of upcoming intersections during navigation system route guidance. (→P. 289) ● Dynamic radar cruise control Displays the approach warning.
  • Page 289 2-2. Instrument cluster Switching the head-up display Display items can be switched by pressing the “HUD” main switch. Speedometer Displays the vehicle speed. Speedometer and Hybrid Sys- tem Indicator Displays Hybrid System Indicator under the speedometer. (→P. 268) When on, the indicator light on the “HUD”...
  • Page 290 2-2. Instrument cluster Setting up the display ■ Setting the brightness The brightness of the display is automatically adjusted in accor- dance with the brightness of the surrounding environment. How- ever, the brightness can also be manually adjusted in 5 stages. Darker Brighter The brightness can be manually...
  • Page 291 2-2. Instrument cluster Turn-by-turn navigation display (if equipped) When the vehicle approaches an intersection, the direction the vehicle should go is guided by the arrow. When the vehicle approaches an intersection, the route guidance will start and the distance to the intersection will also be dis- played.
  • Page 292 2-2. Instrument cluster ■ When driving on snowy roads or in other bright environments When the highest level of brightness has been reached, the display can be made even brighter by pressing and holding “∧” on the brightness control button. Pressing “∨”...
  • Page 293 2-2. Instrument cluster CAUTION ■ Before using the head-up display Check that the position and brightness of the head-up display image does not interfere with safe driving. Incorrect adjustment of the image’s position or brightness may obstruct the driver’s view and lead to an accident, resulting in death or serious injury.
  • Page 294: Headlight Switch

    2-3. Operating the lights and windshield wipers Headlight switch The headlights can be operated manually or automatically. Turning the end of the lever turns on the lights as follows: Type A The headlights, park- ing lights and so on turn on and off auto- matically (when the “POWER”...
  • Page 295 2-3. Operating the lights and windshield wipers Type B The daytime running lights turn on. side marker, parking, tail, license plate, daytime run- ning lights and instru- ment panel lights turn The headlights and all the lights listed above turn on. The daytime running lights turn off.
  • Page 296 2-3. Operating the lights and windshield wipers Type C The daytime running lights turn on. side marker, parking, tail, license plate, daytime run- ning lights and instru- ment panel lights turn The headlights and all the lights listed above (except day- time running lights) turn on.
  • Page 297 2-3. Operating the lights and windshield wipers Turning on the high beam headlights With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off.
  • Page 298 2-3. Operating the lights and windshield wipers ■ Headlight control sensor (if equipped) The sensor may not function properly if an object is placed on the sensor, or any- thing that blocks the sensor is affixed to the windshield. Doing so interferes with the sensor detecting the level of ambient light and may cause the automatic headlight sys- ITO23P105...
  • Page 299 2-3. Operating the lights and windshield wipers ■ Automatic headlight leveling system (if equipped) The level of the headlights is automatically adjusted according to the number of passengers and the loading condition of the vehicle to ensure that the headlights do not interfere with other road users. ■...
  • Page 300: Fog Light Switch

    2-3. Operating the lights and windshield wipers ∗ Fog light switch The fog lights secure excellent visibility in difficult driving condi- tions, such as in rain and fog. Type A Turns the fog lights Turns the fog lights ∗ : If equipped...
  • Page 301 2-3. Operating the lights and windshield wipers Type B Turns the fog lights Turns the fog lights ■ Fog lights can be used when The headlights are on in low beam. NOTICE ■ To prevent 12-volt battery discharge Do not leave the lights on longer than necessary when the hybrid system is off.
  • Page 302: Windshield Wipers And Washer

    2-3. Operating the lights and windshield wipers Windshield wipers and washer When intermittent windshield wiper operation is selected, wiper intervals can be also adjusted. The wiper operation is selected by moving the lever as follows. Type A Intermittent wind- shield wiper opera- tion speed wind-...
  • Page 303 2-3. Operating the lights and windshield wipers Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts. If the headlights are on, the headlight cleaner will operate once. Type B Intermittent wind- shield wiper opera- tion speed wind-...
  • Page 304 2-3. Operating the lights and windshield wipers Increases the intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts. If the headlights are on, the headlight cleaner will operate once.
  • Page 305 Do not operate the switch continually as the washer fluid pump may over- heat. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. ■ To prevent 12-volt battery discharge Do not leave the wipers on longer than necessary when the hybrid system is off.
  • Page 306: Rear Window Wiper And Washer

    2-3. Operating the lights and windshield wipers ∗ Rear window wiper and washer Turning the end of the lever turns on the rear window wiper and washer as follows: Type A Intermittent window wiper operation Normal window wiper operation Washer/wiper dual operation Washer/wiper...
  • Page 307 2-3. Operating the lights and windshield wipers Type B Intermittent window wiper operation Normal window wiper operation Washer/wiper dual operation Washer/wiper dual operation ■ The rear window wiper and washer can be operated when The “POWER” switch is in ON mode. ■...
  • Page 308 2-3. Operating the lights and windshield wipers NOTICE ■ When the rear window is dry Do not use the wiper, as it may damage the rear window. ■ When the washer fluid tank is empty Do not operate the switch continually as the washer fluid pump may over- heat.
  • Page 309: Headlight Cleaner Switch

    2-3. Operating the lights and windshield wipers ∗ Headlight cleaner switch Washer fluid can be sprayed on the headlights. Press the switch to clean the headlights. ■ The headlight cleaners can be operated when The “POWER” switch is in ON mode and the headlight switch is turned on. If equipped, the headlight switch is in the “AUTO”...
  • Page 310: Using Other Driving Systems

    2-4. Using other driving systems ∗ Cruise control Use the cruise control to maintain a set speed without depressing the accelerator pedal. Cruise control switch Indicators ■ Setting the vehicle speed Press the “ON-OFF” button to STEP activate the cruise control. Cruise control indicator will come on.
  • Page 311 2-4. Using other driving systems ■ Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
  • Page 312 If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer.
  • Page 313 2-4. Using other driving systems CAUTION ■ To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
  • Page 314: Dynamic Radar Cruise Control

    2-4. Using other driving systems ∗ Dynamic radar cruise control Dynamic radar cruise control supplements conventional cruise con- trol with a vehicle-to-vehicle distance control. In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates or decelerates in order to maintain a set following distance from vehi- cles ahead.
  • Page 315 2-4. Using other driving systems ■ Setting the vehicle speed (vehicle-to-vehicle distance con- trol mode) Press the “ON-OFF” button to STEP activate the cruise control. Radar cruise control indicator will come on. Press the button again to deactivate the cruise control. Accelerate or decelerate the STEP vehicle to the desired speed,...
  • Page 316 2-4. Using other driving systems ■ Adjusting the set speed To change the set speed, operate the lever until the desired set speed is displayed. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
  • Page 317 2-4. Using other driving systems ■ Changing the vehicle-to-vehicle distance Pressing the button changes Preceding vehicle mark vehicle-to-vehicle dis- tance as follows: Long Medium Short The vehicle-to-vehicle distance is set automatically to long mode when the “POWER” switch is turned to ON mode. If a vehicle is running ahead of you, the preceding vehicle mark will also be displayed.
  • Page 318 2-4. Using other driving systems ■ Canceling and resuming the speed control Pulling the lever toward you cancels the cruise control. The speed setting is also can- celed when the brakes are applied. Pushing lever resumes the cruise control and returns vehicle speed ITO24P127 to the set speed.
  • Page 319 2-4. Using other driving systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles up to approximately 400 ft. (120 m) ahead, determines the current vehicle-to-vehicle following distance, and operates to maintain a suit- able following distance from the vehicle ahead.
  • Page 320 2-4. Using other driving systems Example of constant speed cruising When there are no vehicles ahead The vehicle travels at the speed set by the driver. The desired vehicle-to- vehicle distance can also be set by operating the vehicle-to-vehicle dis- tance control.
  • Page 321 2-4. Using other driving systems Approach warning When your vehicle is too close to a vehicle ahead, and sufficient automatic deceleration via the cruise control is not possible, the dis- play will flash and the buzzer will sound to alert the driver. An exam- ple of this would be if another driver cuts in front of you while you are following a vehicle.
  • Page 322 2-4. Using other driving systems Selecting conventional constant speed control mode Constant speed control mode differs from vehicle-to-vehicle distance control mode. When constant speed mode is selected, your vehicle will maintain a set speed regardless of whether or not there are other vehicles in the lane ahead.
  • Page 323 The windshield wipers are operating at high speed (when the wiper switch is set to the high speed windshield wiper operation position). If vehicle-to-vehicle distance control driving is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Toyota dealer.
  • Page 324 2-4. Using other driving systems ■ Automatic cancelation of constant speed control The cruise control will stop maintaining the vehicle speed in the following sit- uations: ● Actual vehicle speed is more than approximately 10 mph (16 km/h) below the set vehicle speed. At this time, the memorized set speed is not retained.
  • Page 325 2-4. Using other driving systems ■ Warning lights, messages and buzzers for dynamic radar cruise con- trol Warning lights, warning messages and buzzers are used to indicate a sys- tem malfunction or to inform the driver of the need for caution while driving. ■...
  • Page 326 2-4. Using other driving systems CAUTION ■ Before using dynamic radar cruise control Do not overly rely on vehicle-to-vehicle distance control. Be aware of the set speed. If automatic deceleration/acceleration is not appropriate, adjust the vehicle speed, as well as the distance between your vehicle and vehicles ahead by applying the brakes etc.
  • Page 327 2-4. Using other driving systems CAUTION ■ To avoid inadvertent cruise control activation Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for dynamic radar cruise control Do not use dynamic radar cruise control in any of the following situations. Doing so may result in inappropriate speed control and could cause an acci- dent resulting in death or serious injury.
  • Page 328 2-4. Using other driving systems CAUTION ■ When the sensor may not be correctly detecting the vehicle ahead Apply the brakes as necessary when any of the following types of vehicles are in front of you. As the sensor may not be able to correctly detect these types of vehicles, the approach warning (→P.
  • Page 329 If the sensor moves even slightly off position, the system may become inaccurate or malfunction. If the sensor or surrounding area is subject to a strong impact, always have the area inspected and adjusted by your Toyota dealer. ● Do not disassemble the sensor.
  • Page 330: Driving Assist Systems

    2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ■...
  • Page 331 2-4. Using other driving systems ■ Hill-start assist control →P. 333 ■ PCS (Pre-Collision System) (if equipped) →P. 335 When the TRAC/VSC/ABS systems are operating The slip indicator light will flash while the TRAC/VSC/ABS sys- tems are operating.
  • Page 332 2-4. Using other driving systems ■ Sounds and vibrations caused by the ABS, brake assist, VSC and TRAC ● A sound may be heard from the engine compartment when the hybrid system is started, just after the vehicle begins to move, if the brake pedal is depressed forcefully or repeatedly, or 1-2 minutes after the hybrid sys- tem is stopped.
  • Page 333 2-4. Using other driving systems CAUTION ■ The ABS does not operate effectively when ● The limits of tire gripping performance have been exceeded (such as excessively worn tires on a snow covered road). ● The vehicle hydroplanes while driving at high speed on wet or slick road. ■...
  • Page 334 The ABS and VSC systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and the suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause a system to malfunction.
  • Page 335: Hill-Start Assist Control

    2-4. Using other driving systems Hill-start assist control Hill-start assist control helps to prevent the vehicle from rolling backwards when starting on an incline or slippery slope. To engage hill-start assist con- trol, further depress the brake pedal when the vehicle is stopped completely.
  • Page 336 • The brake pedal is depressed again. • The brake pedal has been depressed for more than approximately 3 minutes. ■ If the slip indicator light comes on It may indicate a malfunction in the system. Contact your Toyota dealer. CAUTION ■ Hill-start assist control ●...
  • Page 337: Pcs (Pre-Collision System)

    2-4. Using other driving systems ∗ PCS (Pre-Collision System) When the radar sensor detects possibility of a frontal collision, the pre-collision systems such as the brakes and seat belts are automat- ically engaged to lessen impact as well as vehicle damage. ■...
  • Page 338 2-4. Using other driving systems Disabling pre-collision braking Pre-collision braking enabled Pre-collision braking disabled The “PCS” warning light will turn on when pre-collision braking is disabled. Radar sensor The radar sensor detects vehi- cles or other obstacles on or near the road ahead and deter- mines whether a collision is imminent based on the position, speed, and heading of the obsta-...
  • Page 339 2-4. Using other driving systems ■ The pre-collision system is operational when ● Pre-collision seat belts (operating conditions A): • Vehicle speed is greater than about 19 mph (30 km/h). • The system detects sudden braking or skidding. • The front occupants are wearing a seat belt. ●...
  • Page 340 2-4. Using other driving systems ■ Conditions that may trigger the system even if there is no possibility of a collision ● When there is an object by the roadside at the entrance to a curve ● When passing an oncoming vehicle on a curve ●...
  • Page 341 2-4. Using other driving systems ■ Obstacles not detected The sensor cannot detect plastic obstacles such as traffic cones. There may also be occasions when the sensor cannot detect pedestrians, animals, bicycles, motorcycles, trees, or snowdrifts. ■ Situations in which the pre-collision system does not function properly The system may not function effectively in situations such as the following: ●...
  • Page 342 2-4. Using other driving systems ■ Certification For vehicles sold in the U.S.A. FCC ID: HYQDNMWR004 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 343 2-4. Using other driving systems CAUTION ■ Limitations of the pre-collision system Do not overly rely on the pre-collision system. Always drive safely, taking care to observe your surroundings and checking for any obstacles or other road hazards. Failure to do so may cause an accident resulting in death or serious injury. ■...
  • Page 344 If the sensor moves even slightly off position, the system may become inaccurate or malfunction. If the sensor or surrounding area is subject to a strong impact, always have the area inspected and adjusted by your Toyota dealer. ● Do not disassemble the sensor.
  • Page 345: Driving Information Cargo And Luggage

    2-5. Driving information Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load: ● Stow cargo and luggage in the luggage compartment whenever possible. ● Be sure all items are secured in place. ●...
  • Page 346 Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. (→P. 348) Toyota does not recommend towing a trailer with your vehicle. Your vehicle is not designed for trailer towing.
  • Page 347 2-5. Driving information Calculation formula for your vehicle Cargo capacity Total load capacity (vehicle capacity weight) (→P. 610) When 2 people with the combined weight of A lb. (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb.
  • Page 348 2-5. Driving information CAUTION ■ Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compart- ment: ● Receptacles containing gasoline ● Aerosol cans ■ Storage precautions Observe the following precautions. Failure to do so may result in death or serious injury.
  • Page 349 2-5. Driving information CAUTION ● Secure all items in the occupant compartment, as they may shift and injure someone in the event of an accident or sudden braking. ● When you fold down the rear seats, long items should not be place directly behind the front seats.
  • Page 350: Vehicle Load Limits

    Seating capacity means the maximum number of occupants whose estimated average weight is 150 lb. (68 kg) per person. ■ Towing capacity Toyota does not recommend towing a trailer with your vehicle. ■ Cargo capacity Cargo capacity may increase or decrease depending on the weight and the number of occupants.
  • Page 351: Winter Driving Tips

    2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside tem- peratures.
  • Page 352 2-5. Driving information ■ Before driving the vehicle Perform the following according to the driving conditions: ● Do not try to forcibly open a window or move a wiper that is frozen. Pour warm water over the frozen area to melt the ice. Wipe away the water immediately to prevent it from freezing.
  • Page 353 2-5. Driving information Selecting tire chains Use the tire chains of correct size and type. Use SAE Class “S” type radial tire chains except radial cable chains or V-bar type chains. Regulations on the use of tire chains Regulations regarding the use of tire chains vary depending on loca- tion and type of road.
  • Page 354 2-5. Driving information CAUTION ■ Driving with snow tires Observe the following precautions to reduce the risk of accidents. Failure to do so may result in a loss of vehicle control and cause death or serious injury. ● Use tires of the size specified. ●...
  • Page 355 NOTICE ■ Repairing or replacing snow tires Request repairs or replacement of snow tires from Toyota dealers or legiti- mate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
  • Page 356: Trailer Towing

    Trailer towing Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicycle, etc. Your vehicle is not designed for trailer towing or for the use of tow...
  • Page 357: Dinghy Towing

    2-5. Driving information Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with the four wheels on the ground.
  • Page 358 2-5. Driving information...
  • Page 359: Interior Features

    Interior features 3-1. Using the air conditioning 3-4. Using the storage features system and defogger List of storage features ..385 • Glove boxes ....386 Air conditioning system ..358 • Console box ....387 Using the steering wheel •...
  • Page 360: Air Conditioning System

    3-1. Using the air conditioning system and defogger Air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Outside temperature display (→P. 394) Fan speed Temperature Air outlet control button control button display Windshield Temperature Fan speed defogger button setting display...
  • Page 361 3-1. Using the air conditioning system and defogger Using the automatic mode Press STEP The air conditioning system will begin to operate. Air outlets and fan speed are automatically adjusted according to the temperature set- ting. Press “▲” to increase the temperature and “▼” to decrease STEP the temperature on the Adjusting the settings...
  • Page 362 3-1. Using the air conditioning system and defogger ■ Changing the air outlets Press The air outlets switch each time the button is pressed. Air flows to the upper body. ITO31P105 Air flows to the upper body and feet.
  • Page 363 3-1. Using the air conditioning system and defogger Mainly air flows to the feet. Air flows to the feet and the windshield defogger operates. ■ Switching between outside air and recirculated air modes Press The modes switches between (recycles air inside the vehicle) (introduces air from outside the vehicle) modes each time the button is pressed.
  • Page 364 3-1. Using the air conditioning system and defogger Defogging the windshield Press The air conditioning system con- trol operates automatically. (The gasoline engine may oper- ate during EV mode driving, depending on vehicle conditions.) Recirculated air mode will auto- matically switch to outside air mode.
  • Page 365 3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets ■ Adjusting the air outlets Center outlets Direct air flow to the left or right, up or down. Right and left side outlets Direct air flow to the left or right, up or down.
  • Page 366 3-1. Using the air conditioning system and defogger ■ Opening and closing the air outlets Center outlets Open the vent. Close the vent. Move the knob in the direction of the printed arrow until a click is heard. Right and left side outlets Open the vent.
  • Page 367 3-1. Using the air conditioning system and defogger ■ Using the automatic mode Fan speed is adjusted automatically in accordance with the temperature set- ting and ambient conditions, etc. As a result, the following may occur. ● Immediately after is pressed, the fan may stop for a while until warm or cool air is ready to flow.
  • Page 368 In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, refer to the “Owner’s Manual Sup- plement/ Scheduled Maintenance Guide”.) When inspecting, cleaning and replacing the air conditioning filter, contact your Toyota dealer.
  • Page 369 3-1. Using the air conditioning system and defogger ■ If air flow from the vents decreases dramatically The filter may be clogged. Contact your Toyota dealer. ■ Operation of the air conditioning system in Eco drive mode In the Eco drive mode, the air conditioning system is controlled as follows to prioritize fuel efficiency: ●...
  • Page 370 3-1. Using the air conditioning system and defogger CAUTION ■ To prevent the windshield from fogging up Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.
  • Page 371: Using The Steering Wheel Climate Remote Control Switches

    3-1. Using the air conditioning system and defogger Using the steering wheel climate remote control switches Some air conditioning features can be controlled using the switches on the steering wheel. Temperature control Outside air or recirculated air mode Adjusting the temperature setting Press “∧”...
  • Page 372 3-1. Using the air conditioning system and defogger ■ When operating the steering switches (vehicles with touch tracer dis- play) ● The steering switches operation status is displayed on the instrument cluster for confirmation purposes. (→P. 258) ● Settings are shown on the multi-infor- mation display when the steering switch is operated.
  • Page 373: Remote Air Conditioning System

    3-1. Using the air conditioning system and defogger Remote Air Conditioning System The Remote Air Conditioning System uses electrical energy stored in the hybrid battery (traction battery) and allows the air conditioning to be operated by remote control. If the Remote Air Conditioning System is used while the charging cable is connected to the vehicle, the reduction of charge in the hybrid battery (traction battery) will be suppressed to allow you to use electricity from an external power source.
  • Page 374 3-1. Using the air conditioning system and defogger ■ Operating conditions The system will only operate if all of the following conditions are met: ● The shift position is in P. ● The “POWER” switch is OFF. ● All doors are closed. ●...
  • Page 375 3-1. Using the air conditioning system and defogger ■ Security feature Any unlocked doors will be automatically locked when the system is operat- ing. The buzzer will beep and the emergency flashers flash when the doors have been locked or the system has been turned off. (The doors locked: Once;...
  • Page 376 3-1. Using the air conditioning system and defogger CAUTION ■ Precautions for the Remote Air Conditioning System ● Do not use the system if people are in the vehicle. • Even when the system is in use, the internal temperature may still reach a high level due to features such as the automatic shut-off.
  • Page 377: Rear Window And Outside Rear View Mirror Defoggers Switch

    3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers switch Defoggers are used to defog the rear window, and to remove rain- drops, dew and frost from the outside rear view mirrors (if equipped). Turns the rear window and outside rear view mirror defog- gers on/off...
  • Page 378: Using The Audio System

    3-2. Using the audio system Audio system types Vehicles with Display Audio system Type A Type B Refer to the “Display Audio System Owner’s Manual”.
  • Page 379 3-2. Using the audio system Vehicles with a navigation system Canada Refer to the “Navigation System Owner’s Manual”. Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. For details, refer to the “Display Audio System Owner’s Manual”...
  • Page 380 3-2. Using the audio system ® ■ About Bluetooth (vehicles with Display Audio system) Bluetooth is a registered trade mark of Bluetooth SIG. Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corpo- ration is under license.
  • Page 381 3-2. Using the audio system CAUTION Properly shielded a grounded cables and connectors must be used for con- nection to host computer and / or peripherals in order to meet FCC emission limits. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
  • Page 382 3-2. Using the audio system CAUTION Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that neces- sary for successful communication.
  • Page 383: Using The Aux Port/Usb Port

    3-2. Using the audio system Using the AUX port/USB port This port can be used to connect a portable audio device and listen to it through the vehicle’s speakers. Open the console box lid. (→P. 387) STEP Connect the portable audio STEP device.
  • Page 384: Using The Interior Lights

    3-3. Using the interior lights Interior lights list Rear interior light (→P. 384) Front interior/personal lights (→P. 383) Shift lever lighting “POWER” switch lighting Foot lights (if equipped) Front door courtesy lights...
  • Page 385: Front Interior Lights

    3-3. Using the interior lights Front interior lights and personal lights Front interior lights Turns the lights off Turns the door position on Turns the lights on Personal lights Type A Turns the lights on/off Type B Turns the lights on/off...
  • Page 386: Rear Interior Light

    3-3. Using the interior lights Rear interior light Rear interior light The light will turn on/off in con- junction with the front interior lights Turns the light on ITI34P133a ■ Illuminated entry system The lights automatically turn on/off according to “POWER” switch mode, the presence of the electronic key, whether the doors are locked/unlocked, and whether the doors are opened/closed.
  • Page 387: Using The Storage Features

    3-4. Using the storage features List of storage features Bottle holders Auxiliary boxes Glove boxes Cup holders Console box CAUTION ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ●...
  • Page 388: Glove Boxes

    3-4. Using the storage features Glove boxes Glove boxes Upper glove box Push the button. Lower glove box Push the button. ■ Glove box light (lower glove box only) The glove box light turns on when the tail lights are on. CAUTION ■...
  • Page 389: Console Box

    3-4. Using the storage features Console box Console box Pull up the lever to release the lock. Lift the console box lid to open. CAUTION ■ While driving Keep the console box closed when not is use. In the event of sudden brak- ing or sudden swerving, an accident may occur due to an occupant being struck by the open console box or the items stored inside.
  • Page 390: Cup Holders

    3-4. Using the storage features Cup holders Cup holders Front (type A) Lift the lid. Front (type B) Rear (if equipped) Pull down the armrest. ITO35P113...
  • Page 391 3-4. Using the storage features Cup holders CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of sudden braking, sudden swerving or an accident and cause injury.
  • Page 392: Bottle Holders

    3-4. Using the storage features Bottle holders Bottle holders ITO35P121 CAUTION ■ Items unsuitable for the bottle holder Do not place anything other than pet bottles in the bottle holders. Other items may be thrown out of the holders in the event of sudden braking, sudden swerving or an accident and cause injury.
  • Page 393: Auxiliary Boxes

    3-4. Using the storage features Auxiliary boxes Auxiliary boxes Type A Type B Push the lid. The overhead console is useful temporarily storing small items. CAUTION ■ While driving Do not leave the overhead console open. Items may fall out and cause injury. ■...
  • Page 394: Other Interior Features

    3-5. Other interior features Sun visors To set the visor in the for- ward position, flip it down. To set the visor in the side position, flip down, unhook, and swing it to the side. ITO36P101...
  • Page 395: Vanity Mirrors

    3-5. Other interior features Vanity mirrors Slide the cover to open. The light turns on when the cover is opened. ITO36P103 NOTICE ■ To prevent 12-volt battery discharge Do not leave the vanity lights on for extended periods while the hybrid sys- tem is off.
  • Page 396: Outside Temperature Display

    When stopped, or driving at low speeds (less than 16 mph [25 km/h]) ● When the outside temperature has changed suddenly (at the entrance/ exit of a garage, tunnel, etc.) ■ When -- is displayed The system may be malfunctioning. Take your vehicle to your Toyota dealer.
  • Page 397: Power Outlets

    3-5. Other interior features Power outlets The power outlets can be used for 12 V accessories that run on less than 10 A. Instrument panel Open the cover. Rear console box Open the cover. ■ The power outlets can be used when The “POWER”...
  • Page 398 3-5. Other interior features NOTICE ■ To avoid damaging the power outlets Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit. ■...
  • Page 399: Seat Heaters

    3-5. Other interior features Seat heaters Heats the left front seat Heats the right front seat HI: Strong LO: Weak The indicator light of the side you pressed (“HI” or “LO”) comes on. To stop operation, gently press the side of the button opposite the side that was pressed.
  • Page 400 3-5. Other interior features CAUTION ■ Burns ● Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the physically chal- lenged •...
  • Page 401: Armrest

    3-5. Other interior features ∗ Armrest Pull the armrest down for use. ITO36P111 NOTICE ■ To prevent damage to the armrest Do not place too much strain on the armrest. ∗ : If equipped...
  • Page 402: Assist Grips

    3-5. Other interior features Assist grips An assist grip installed on the ceiling can be used to support your body while sitting on the seat. CAUTION ■ Assist grip Do not use the assist grip when getting in or out of the vehicle or rising from your seat.
  • Page 403: Floor Mats

    3-5. Other interior features Floor mats Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks STEP (clips) into the floor mat eye- lets.
  • Page 404 When installing the driver’s floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
  • Page 405: Luggage Compartment Features

    3-5. Other interior features Luggage compartment features ■ Cargo hooks Raise the hook to use. The cargo hooks are provided for securing loose items. ■ Auxiliary boxes Center Lift the center deck board. Side Lift the side deck board to remove it.
  • Page 406 3-5. Other interior features ■ Luggage cover Pull out the luggage cover and secure it to the hook brackets. Removing the luggage cover Lift it up.
  • Page 407 3-5. Other interior features Stowing the luggage cover Remove the side deck boards STEP and open the center deck board. Flip the cover over from its STEP usage position so that the “TOP” mark is facing downward, and stow the cover. “TOP”...
  • Page 408 3-5. Other interior features CAUTION ■ When the cargo hooks are not in use To avoid injury, always return the cargo hooks to their stowed positions. ■ Caution while driving Keep the lid of each storage spaces closed while driving. In the event of sud- den braking or sudden swerving, an accident may occur due to an occupant being struck by an open auxiliary box or the items stored inside.
  • Page 409: Garage Door Opener

    3-5. Other interior features ∗ Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, secu- rity systems, and other devices. ® The garage door opener (HomeLink Universal Transceiver) is manufac- ®...
  • Page 410 3-5. Other interior features ® ■ Programming HomeLink Point the remote control trans- STEP mitter for the device 1 to 3 in. (25 ® to 75 mm) from the HomeLink buttons. ® Keep the HomeLink indicator light in view while programming. Press and hold one of the STEP ®...
  • Page 411 3-5. Other interior features ® Test the HomeLink operation by STEP pressing the newly programmed button. ® If a HomeLink button has been programmed for a garage door, check to see if the garage door opens and closes. If the garage door does not operate, see if your garage transmitter is of the rolling code type.
  • Page 412 3-5. Other interior features ■ Programming a rolling code system (for U.S.A. owners) If your device is rolling code equipped, follow the steps under the ® heading “Programming HomeLink ” before proceeding with the steps listed below. Locate the training button on the ceiling mounted garage door STEP opener motor.
  • Page 413 HomeLink buttons. ■ Programming other devices To program other devices such as home security systems, home door locks and lighting, contact your Toyota dealer for assistance. ■ Reprogramming a button ® The individual HomeLink buttons cannot be erased but can be reprogrammed.
  • Page 414 3-5. Other interior features ® Operating HomeLink ® ® Press the appropriate HomeLink button. The HomeLink indicator light should come on. ® The HomeLink compatible transceiver in your vehicle continues to send a signal for up to 20 seconds as long as the button is pressed. ®...
  • Page 415 3-5. Other interior features ■ Before programming ● Install a new battery in the remote control transmitter. ● The battery side of the remote control transmitter must be pointed away ® from the HomeLink button. ■ Certification for the garage door opener For vehicles sold in the U.S.A.
  • Page 416 3-5. Other interior features CAUTION ■ When programming a garage door or other remote control device The garage door or other device may operate, so ensure people and objects are out of danger to prevent potential harm. ■ Conforming to federal safety standards ®...
  • Page 417: Safety Connect

    Telematics Subscription Service Agreement and its Terms and Conditions, as in effect and amended from time to time, a current copy of which is available at Toyota.com. All use of the Safety Con- nect service is subject to such then-applicable Terms and Condi- tions.
  • Page 418 After you have signed the Telematics Subscription Service Agreement and are enrolled, you can begin receiving services. A variety of subscription terms is available for purchase. Contact your Toyota dealer, call 1-800-25-TOYOTA (1-800-255-3987) or push the “SOS” button in your vehicle for further subscription details.
  • Page 419 Safety Connect. ● Safety Connect is available beginning Fall 2009 on select Toyota models. Contact with the Safety Connect response center is dependent upon the telematics device being in operative condition, cellular connection avail- ability, and GPS satellite signal reception, which can limit the ability to reach the response center or receive emergency service support.
  • Page 420 ● Green indicator light flashing = Safety Connect call in process ● Red indicator light (except at vehicle start-up) = System malfunc- tion (contact your Toyota dealer) ● No indicator light (off) = Safety Connect service not active Safety Connect services ■...
  • Page 421 After fil- ing a police report, call the Safety Connect response center at 1- 800-25-TOYOTA (1-800-255-3987) and follow the prompts for Safety Connect to initiate this service. In addition to assisting law enforcement with recovery of a stolen...
  • Page 422 3-5. Other interior features Safety information for Safety Connect Important! Read this information before using Safety Connect. ■ Exposure to radio frequency signals The Safety Connect system installed in your vehicle is a low-power radio transmitter and receiver. It receives and also sends out radio frequency (RF) signals.
  • Page 423 3-5. Other interior features ■ Certification for Safety Connect FCC ID: O9EGTM1 FCC ID: O6Y-CDMRF101 NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 424 3-5. Other interior features...
  • Page 425 Maintenance and care 4-1. Maintenance and care Cleaning and protecting the vehicle exterior..424 Cleaning and protecting the vehicle interior..428 4-2. Maintenance Maintenance requirements ....431 General maintenance..434 Emission inspection and maintenance (I/M) programs......438 4-3. Do-it-yourself maintenance Do-it-yourself service precautions ....
  • Page 426: Maintenance And Care Cleaning And Protecting

    4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
  • Page 427 4-1. Maintenance and care ■ Before car washes Check that the fuel filler door and charging port lid on your vehicle are closed properly. ■ Automatic car washes ● Fold the mirrors and remove the antenna before washing the vehicle. Start washing from the front of the vehicle.
  • Page 428 4-1. Maintenance and care ■ When using a car wash If the door handle becomes wet while the electronic key is within the effec- tive range, the door may lock and unlock repeatedly. Place the key in a posi- tion 6 ft. (2 m) or more separate from the vehicle while the vehicle is being washed.
  • Page 429 4-1. Maintenance and care NOTICE ■ To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels etc.) ● Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads •...
  • Page 430: Cleaning And Protecting The Vehicle Interior

    4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
  • Page 431 4-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
  • Page 432 4-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use the following types of detergent, as they may discolor the vehi- cle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach •...
  • Page 433: Maintenance

    It is recommended that genuine Toyota parts be used for repairs to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
  • Page 434 STEP the multi-information display indicates that the reset is complete. ■ Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operation of all systems on your vehicle.
  • Page 435 4-2. Maintenance CAUTION ■ If your vehicle is not properly maintained Improper maintenance could result in serious damage to the vehicle and possible serious injury or death. ■ Handling of the 12-volt battery ● Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm.
  • Page 436: General Maintenance

    Booklet” “Owner’s Manual Supplement/Scheduled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items Check points Is the brake fluid at the correct...
  • Page 437 4-2. Maintenance Luggage compartment Items Check points 12-volt battery Check the connections. (→P. 471) Vehicle interior Items Check points • The accelerator pedal should Accelerator pedal move smoothly (without uneven pedal effort or catching). • When parked on a slope and the Hybrid transmission “Park”...
  • Page 438 4-2. Maintenance Items Check points • Do the head restraints move Head restraints smoothly and lock securely? • Do the indicators and buzzers Indicators/buzzers function properly? Lights • Do all the lights come on? • Does the parking brake pedal move smoothly? Parking brake •...
  • Page 439 4-2. Maintenance Vehicle exterior Items Check points Doors • Do the doors operate smoothly? • Does the engine hood lock sys- Engine hood tem work properly? • There should not be any signs of Fluid leaks fluid leakage after the vehicle has been parked.
  • Page 440: Emission Inspection And Maintenance (I/M) Programs

    If the malfunction indicator lamp comes on The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. ■...
  • Page 441: Do-It-Yourself Maintenance

    Brake fluid level (→P. 467) • Rag or paper towel • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol-based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology For the U.S.A.:...
  • Page 442 4-3. Do-it-yourself maintenance Items Parts and tools • “Toyota Genuine Motor Oil” or equivalent Engine oil level (→P. 460) • Rag or paper towel • Funnel (used only for adding engine oil) • Fuse with same amperage rating Fuses (→P. 495) as original •...
  • Page 443 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. ■ When working on the engine compartment ● Make sure that the indicator on the “POWER”...
  • Page 444: Hood

    4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release STEP lever. The hood will pop up slightly. Pull up the auxiliary catch STEP lever and lift the hood.
  • Page 445 4-3. Do-it-yourself maintenance Hold the hood open by insert- STEP ing the supporting rod into either of the slots. Use the forward slot to open the hood normally, or use the rearward slot when the hood needs to be opened wide. CAUTION ■...
  • Page 446 4-3. Do-it-yourself maintenance NOTICE ■ When closing the hood Be sure to return the support rod to its clip before closing the hood. Closing the hood without returning the support rod properly could cause the hood to bend.
  • Page 447: Positioning A Floor Jack

    4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement (such as under rear suspension etc.) may damage your vehicle or cause injury. ■ Front ■ Rear ITO43P106...
  • Page 448 4-3. Do-it-yourself maintenance CAUTION ■ When raising your vehicle Make sure to observe the following precautions to reduce the possibility of death or serious injury: ● Lift up the vehicle using a floor jack such as the one shown in the illustra- tion.
  • Page 449 4-3. Do-it-yourself maintenance CAUTION ● Do not raise the vehicle while someone is in the vehicle. ● When raising the vehicle, do not place any object on top of or underneath the floor jack. ● When raising the vehicle, do not set the Rear suspension floor jack under the rear suspension.
  • Page 450: Replacing The Tire

    4-3. Do-it-yourself maintenance Replacing the tire When raising your vehicle with a jack, position the jack correctly. Improper placement may damage your vehicle or cause injury. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ●...
  • Page 451 4-3. Do-it-yourself maintenance Taking out and storing the jack and tools ■ Taking out the jack and tools → Move the driver’s seat to the fully forward position. ( P. 146) STEP Remove the tool box lid. STEP Remove 2 claws and pull the lid. Unhook the tightening strap and take out the jack.
  • Page 452 4-3. Do-it-yourself maintenance Take out the jack handle after taking out the jack. Take out the wheel nut wrench.
  • Page 453 4-3. Do-it-yourself maintenance ■ Storing the jack and tools Store the jack and tools in a reverse way as taking out the STEP jack. After storing the jack, make sure it is securely held by the tight- ening strap. Reinstall the lid. STEP Insert the tab on far side of the lid first, then insert the tab on...
  • Page 454 4-3. Do-it-yourself maintenance Replacing a tire Chock the tires. STEP Tire position Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire...
  • Page 455 4-3. Do-it-yourself maintenance STEP Slightly loosen the wheel nuts (one turn). Turn the tire jack portion “A” by STEP hand until the notch of the jack is in contact with the jack point. Raise the vehicle until the tire is STEP slightly raised off the ground.
  • Page 456 4-3. Do-it-yourself maintenance Remove all the wheel nuts and STEP the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface. Installing a tire Remove any dirt or foreign mat- STEP ter from the wheel contact sur- face.
  • Page 457 4-3. Do-it-yourself maintenance Lower the vehicle. STEP Firmly tighten each nut two or STEP three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) Stow the tire jack and all tools. STEP ■ After completing the tire change The tire pressure warning system must be reset.
  • Page 458 4-3. Do-it-yourself maintenance CAUTION ■ Using the tire jack Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. Observe the following precautions: ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains.
  • Page 459 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • When installing the wheel nuts, be sure to install the wheel nuts with the tapered end facing inward.
  • Page 460 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and...
  • Page 461: Engine Compartment

    4-3. Do-it-yourself maintenance Engine compartment Engine coolant reservoir Brake fluid reservoir (→P. 464) (→P. 467) Engine oil level dipstick Fuse box (→P. 495) (→P. 460) Radiator (→P. 466) Engine oil filler cap Condenser (→P. 466) (→P. 461) Electric cooling fans Power control unit coolant Washer fluid tank (→P.
  • Page 462 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil Park the vehicle on level ground. After warming up the engine STEP and turning off the hybrid system, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
  • Page 463 4-3. Do-it-yourself maintenance Flat dipstick Normal Excessive The shape of the dipstick may differ depending on the type of vehicle or engine. Non-flat dipstick Normal Excessive The shape of the dipstick may differ depending on the type of vehicle or engine. ■...
  • Page 464 4-3. Do-it-yourself maintenance Make sure to check the oil type and prepare the items needed before adding oil. →P. 615 Engine oil selection Oil quantity 1.6 qt. (1.5 L, 1.3 Imp.qt.) (Low → Full) Items Clean funnel Remove the oil filler cap by turning it counterclockwise. STEP Add engine oil slowly, checking the dipstick.
  • Page 465 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
  • Page 466 4-3. Do-it-yourself maintenance Coolant The coolant level is satisfactory if it is between the full (“FULL” or “F”) and low (“LOW” or “L”) lines on the reservoir when the hybrid system is cold. Engine coolant reservoir Reservoir cap “FULL” line “LOW”...
  • Page 467 If the coolant level drops within a short time of replenishing Visually check the radiator, hoses, engine/power control unit coolant reser- voir caps, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system. CAUTION ■...
  • Page 468 Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. CAUTION ■ When the hybrid system is hot Do not touch the radiator or condenser as they may be hot and cause seri- ous injuries, such as burns.
  • Page 469 4-3. Do-it-yourself maintenance Brake fluid ■ Checking fluid level The brake fluid level should be between the “MAX” and “MIN” lines on the tank. ■ Adding fluid Push the tab in and lift the cover off. ITO43P152 Make sure to check the fluid type and prepare the necessary item. Fluid type FMVSS No.116 DOT 3 or SAE J1703 brake fluid Items...
  • Page 470 4-3. Do-it-yourself maintenance ■ Brake fluid can absorb moisture from the air Excess moisture in the brake fluid can cause a dangerous loss of braking efficiency. Use only newly opened brake fluid. CAUTION ■ When filling the reservoir Take care as brake fluid can harm your hands and eyes and damage painted surfaces.
  • Page 471 4-3. Do-it-yourself maintenance Washer fluid Open the lid. STEP Check the washer fluid level on STEP the level gauge. “NORMAL” “LOW” If the washer fluid level is at STEP “LOW”, add washer fluid.
  • Page 472 4-3. Do-it-yourself maintenance CAUTION ■ When adding washer fluid Do not add washer fluid when the hybrid system is hot or operating as washer fluid contains alcohol and may catch fire if spilled on the engine etc. NOTICE ■ Do not use any fluid other than washer fluid Do not use soapy water or engine antifreeze instead of washer fluid.
  • Page 473: 12-Volt Battery

    4-3. Do-it-yourself maintenance 12-volt battery ■ Location The 12-volt battery is located in the right-hand side of lug- gage compartment. ■ Removing the 12-volt battery cover Open the center deck board. (→P. 403) STEP Remove the side deck board. STEP Remove the auxiliary box.
  • Page 474 4-3. Do-it-yourself maintenance Remove the 12-volt battery STEP maintenance cover. ■ Exterior Make sure that the 12-volt battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp ■ Before charging When charging, the 12-volt battery produces hydrogen gas which is flamma- ble and explosive.
  • Page 475 ● Restart the hybrid system, depress the brake pedal, and confirm that it is possible to shift into each shift position. If the system will not start even after multiple attempts at all methods above, contact your Toyota dealer.
  • Page 476 4-3. Do-it-yourself maintenance CAUTION ■ Chemicals in the 12-volt battery The 12-volt battery contains poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the 12-volt battery: ●...
  • Page 477 Use a 12-volt battery designed for this vehicle. Failure to do so may cause gas (hydrogen) to enter the passenger compartment, causing a fire or explo- sion. For replacement of the 12-volt battery, contact your Toyota dealer. NOTICE ■ When charging the 12-volt battery Never charge the 12-volt battery while the hybrid system is operating.
  • Page 478: Tires

    ■ Tire rotation Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recom- mends that tire rotation is Front carried out at the same inter- val as tire inspection. Do not fail to initialize the tire...
  • Page 479 ID codes must be registered in the tire pressure warn- ing computer and the tire pressure warning system must be initial- ized. Have tire pressure warning valve and transmitter ID codes registered by your Toyota dealer. (→P. 479)
  • Page 480 4-3. Do-it-yourself maintenance Initializing the tire pressure warning system ■ The tire pressure warning system must be initialized in the fol- lowing circumstances: ● When rotating front and rear tires which have different tire infla- tion pressures ● When changing the tire size When the tire pressure warning system is initialized, the current tire inflation pressure is set as the benchmark pressure.
  • Page 481 The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code. Have the ID code registered by your Toyota dealer.
  • Page 482 ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage. If you are not sure, consult with your Toyota dealer. Replacing tires and wheels ■ If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly.
  • Page 483 4-3. Do-it-yourself maintenance ■ Maximum load of tire Check that the maximum load of the replacement tire is greater than 1/2 of the Gross Axle Weight Ratings (GAWR) of either the front axle or the rear axle, whichever is greater. For the GAWR, see the Certification Label.
  • Page 484 Initialization can be completed in a few minutes. However, in the follow- ing cases, the settings have not been recorded and the system will not operate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. ●...
  • Page 485 4-3. Do-it-yourself maintenance ■ Tire pressure warning system certification For vehicles sold in the U.S.A. MODEL/FCC IDs: Transmitter: PAXPMV107J Receiver: HYQ13BDE NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 486 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
  • Page 487 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
  • Page 488: Tire Inflation Pressure

    4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size are displayed on the tire and loading information label. (→P. 619)
  • Page 489 4-3. Do-it-yourself maintenance ■ Inspection and adjustment procedure Tire valve Tire pressure gauge Remove the tire valve cap. STEP Press the tip of the tire pressure gauge onto the tire valve. STEP Read the pressure using the gauge gradations. STEP If the tire inflation pressure is not at the recommended STEP level, adjust the pressure.
  • Page 490 Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent inflating, have it checked by your Toyota dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
  • Page 491 4-3. Do-it-yourself maintenance CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury: ● Excessive wear ● Uneven wear ●...
  • Page 492: Wheels

    ● Bent wheels that have been straightened ■ Aluminum wheel precautions ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
  • Page 493 4-3. Do-it-yourself maintenance ■ When replacing wheels The wheels of your vehicle are equipped with tire pressure warning valves and transmitters that allow the tire pressure warning system to provide advance warning in the event of a loss in tire inflation pressure. Whenever wheels are replaced, tire pressure warning valves and trans- mitters must be installed.
  • Page 494 Because tire repair or replacement may affect the tire pressure warn- ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
  • Page 495: Electronic Key Battery

    4-3. Do-it-yourself maintenance Electronic key battery Replace the battery with a new one if it is depleted. ■ You will need the following items: ● Flathead screwdriver ● Lithium battery CR1632 ■ Replacing the battery Take out the mechanical key. STEP Remove the cover.
  • Page 496 4-3. Do-it-yourself maintenance ■ Use a CR1632 lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appli- ance shops or camera stores. ● Replace only with the same or equivalent type recommended by the manufacturer. ●...
  • Page 497: Checking And Replacing Fuses

    4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Turn the “POWER” switch off. STEP Vehicles with Solar Ventilation System: Turn the Solar Ventilation System off and make sure not to operate the Remote Air Condi- tioning System.
  • Page 498 4-3. Do-it-yourself maintenance Remove the fuse. STEP Only type A fuse can be removed using the pullout tool. Check if the fuse is blown. STEP Type A Normal fuse Blown fuse Replace the blown fuse with a new fuse of an appropriate amperage rating.
  • Page 499 4-3. Do-it-yourself maintenance Type B Normal fuse Blown fuse Replace the blown fuse with a new fuse of an appropriate amperage rating. The amper- age rating can be found on the fuse box lid. Type C Normal fuse Blown fuse Replace the blown fuse with a new fuse of an appropriate amperage rating.
  • Page 500 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings ■ Engine compartment FUSE Ampere Circuit Air conditioning system Electric cooling fans Electric cooling fans FUEL OPN 7.5A Fuel filler door opener S-HORN No circuit ENG W/P Cooling system ABS MAIN 7.5A Anti-lock brake system NO.2 H-LP CLN...
  • Page 501 4-3. Do-it-yourself maintenance FUSE Ampere Circuit IGCT PCU, IGCT NO.2, IGCT NO.3 DC/DC-S Inverter and converter P position control system, P posi- P CON MAIN 7.5A tion switch 7.5A Power management system ECU-B2 7.5A Smart key system, hybrid system MAYDAY/DCM MAYDAY/DCM PIMR Charge system...
  • Page 502 4-3. Do-it-yourself maintenance FUSE Ampere Circuit H-LP RH LO Right-hand headlight (low beam) Inverter and converter Hybrid system, P position control system, power management sys- IGCT NO.2 tem, multiport fuel injection sys- tem/sequential multiport fuel injection system MIR HTR Outside rear view mirror defoggers RAD NO.1 Audio system, navigation system Door courtesy lights, luggage...
  • Page 503 4-3. Do-it-yourself maintenance FUSE Ampere Circuit SPARE 7.5A Spare fuse Multiport fuel injection system/ EFI MAIN sequential multiport fuel injection system, cooling system, EFI NO.2 BATT FAN Battery cooling fan Multiport fuel injection system/ sequential multiport fuel injection system, MET, IGN, power man- agement system...
  • Page 504 4-3. Do-it-yourself maintenance ■ Left side instrument panel 9 10 15 16 17 18 27 28 29 30 20 21 23 24 25 26 ITO43P133 FUSE Ampere Circuit Power outlets Multiplex communication system, outside rear view mirrors, driver ECU-ACC support system, audio system, navigation system PWR OUTLET Power outlets...
  • Page 505 4-3. Do-it-yourself maintenance FUSE Ampere Circuit Stop lights, high mounted stop- light, brake system, driver support STOP system, vehicle proximity notifica- tion system P FR DOOR Power windows D FR DOOR Power windows DOOR RR Power windows DOOR RL Power windows S/ROOF No circuit Electric cooling fans, multiplex...
  • Page 506 4-3. Do-it-yourself maintenance FUSE Ampere Circuit RR WIP Rear window wiper and washer Windshield wipers 7.5A Gauges and meters Brake system, driver support sys- tem, multiport fuel injection sys- tem/sequential multiport fuel injection system, SRS airbag sys- tem, front passenger occupant classification system (ECU and sensors), power management sys- tem, smart key system, front pas-...
  • Page 507 The fuses are designed to blow, protecting the wiring harness from damage. ■ When replacing light bulbs Toyota recommends that you use genuine Toyota products designed for this vehicle. Because certain bulbs are connected to circuits designed to prevent overload, non-genuine parts or parts not designed for this vehicle may be unusable.
  • Page 508 4-3. Do-it-yourself maintenance NOTICE ■ Before replacing fuses Have the cause of electrical overload determined and repaired by your Toyota dealer as soon as possible.
  • Page 509: Light Bulbs

    You may replace the following bulbs by yourself. The difficulty level of replacement varies depending on the bulb. As there is a danger that components may be damaged, we recommend that replacement is carried out by your Toyota dealer. ■ Preparing for light bulb replacement Check the wattage of the light bulb to be replaced.
  • Page 510 4-3. Do-it-yourself maintenance ■ Rear bulb locations Rear turn signal light License plate lights Back-up light Replacing light bulbs ■ Headlight low beams (halogen headlights) Turn the bulb base counterclock- STEP wise.
  • Page 511 4-3. Do-it-yourself maintenance Unplug connector while STEP pressing the lock release. ITO43P163 Replace the light bulb, and install STEP the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert. Turn and secure the bulb base. STEP Shake the bulb base gently to check that it is not loose, turn the...
  • Page 512 4-3. Do-it-yourself maintenance ■ Headlight high beams (including daytime running lights for Canada) Turn the bulb base counterclockwise. STEP Vehicles with halogen headlights Vehicles with LED headlights Unplug connector while STEP pressing the lock release. ITO43P165...
  • Page 513 4-3. Do-it-yourself maintenance Replace the light bulb, and install STEP the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert. Turn and secure the bulb base. STEP Shake the bulb base gently to check that it is not loose, turn the headlights on once and visually confirm that no light is leaking through the mounting.
  • Page 514 4-3. Do-it-yourself maintenance ■ Parking lights (halogen headlights) Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP ITO43P167 When installing, reverse the steps listed. STEP...
  • Page 515 4-3. Do-it-yourself maintenance ■ Front side marker lights Turn the bulb base counterclockwise. STEP Vehicles with halogen headlights Vehicles with LED headlights Remove the light bulb. STEP ITO43P167 When installing, reverse the steps listed. STEP...
  • Page 516 4-3. Do-it-yourself maintenance ■ Fog lights (if equipped) Remove the fender liner bolt and STEP clip and pull down the fender liner. Unplug connector while STEP pressing the lock release. Turn the bulb base counterclock- STEP wise.
  • Page 517 4-3. Do-it-yourself maintenance When installing, reverse the steps listed. STEP After installing the bulb base, shake the bulb base gently to check that it is not loose. Insert the clip.
  • Page 518 4-3. Do-it-yourself maintenance ■ Front turn signal lights Remove the fender liner bolt and clip and pull down the fender STEP liner. (→P. 514) For the U.S.A. Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP...
  • Page 519 4-3. Do-it-yourself maintenance For Canada Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP ITO43P144 When installing, reverse the steps listed. STEP Insert the clip.
  • Page 520 4-3. Do-it-yourself maintenance ■ Rear turn signal lights and back-up lights Open the back door and remove STEP the cover. To prevent damage, cover the tip of the screwdriver with a rag. Turn the bulb base counterclock- STEP wise. Rear turn signal light Back-up light Remove the light bulb.
  • Page 521 4-3. Do-it-yourself maintenance ■ License plate lights Open the back door and remove STEP the cover. To prevent damage, cover the tip of the screwdriver with a rag. Turn the bulb base counterclock- STEP wise. ITO43P149 Remove the light bulb. STEP ITO43P150 When installing, reverse the steps listed.
  • Page 522 (except for Canada) consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. ■...
  • Page 523 4-3. Do-it-yourself maintenance CAUTION ■ Replacing light bulbs ● Be sure to stop the hybrid system and turn off the lights. Do not attempt to replace the bulb immediately after turning off the lights. The bulbs become very hot and may cause burns. ●...
  • Page 524 4-3. Do-it-yourself maintenance...
  • Page 525: When Trouble Arises

    When trouble arises 5-1. Essential information Emergency flashers ..524 If your vehicle needs to be towed ......525 If you think something is wrong ......532 5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds ......
  • Page 526: Essential Information

    5-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
  • Page 527: If Your Vehicle Needs To Be Towed

    If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.
  • Page 528 5-1. Essential information Emergency towing If a tow truck is not available in an emergency, your vehicle may be temporarily towed using a cable or chain secured to the emergency towing eyelet(s). This should only be attempted on hard surfaced roads for short distances at under 18 mph (30 km/h).
  • Page 529 5-1. Essential information Installing towing eyelets Remove the eyelet cover using a STEP flathead screwdriver. To prevent damage, cover the tip of the screwdriver with a rag. Insert the towing eyelet into the STEP hole and tighten partially by hand. Tighten down the towing eyelet STEP securely using a wheel nut...
  • Page 530 5-1. Essential information Towing with a sling-type truck Do not tow with a sling-type truck to prevent body damage. Towing with a wheel-lift type truck From the front Release the parking brake. From the rear Use a towing dolly under the front wheels.
  • Page 531 5-1. Essential information Using a flat bed truck If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°. Do not overly tighten the tie downs or the vehicle may be damaged. ■...
  • Page 532 5-1. Essential information CAUTION ■ Caution while towing ● Use extreme caution when towing the vehicle. Avoid sudden starts or erratic driving maneuvers which place excessive stress on the emergency towing eyelets and the cables or chains. Always be cautious of the surroundings and other vehicles while towing. ●...
  • Page 533 5-1. Essential information NOTICE ■ To prevent damaging the vehicle When raising the vehicle, ensure adequate ground clearance for towing at the opposite end of the raised vehicle. Without adequate clearance, the vehicle could be damaged while being towed. ■ To prevent causing serious damage to the hybrid transmission when towing using a wheel-lift type truck Never tow this vehicle from the rear with the front wheels on the ground.
  • Page 534: If You Think Something Is Wrong

    5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
  • Page 535: Steps To Take In An Emergency If A Warning Light Turns On Or A Warning Buzzer Sounds

    If a light comes on or flashes, but then goes off, this does not necessarily indicate a malfunction in the system. However, if this continues to occur, have the vehicle inspected by your Toyota dealer. Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous.
  • Page 536 Stop the vehicle immediately. The following warning indicates the possibility of damage to the vehi- cle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Charging system warning light Indicates a malfunction in the vehicle’s charging system...
  • Page 537 5-2. Steps to take in an emergency Have the vehicle inspected by your Toyota dealer immediately. Failure to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately.
  • Page 538 5-2. Steps to take in an emergency Warning light Warning light/Details Pre-collision system warning light Indicates a malfunction in the pre-collision system The warning light will operate as follows, even when the system is not malfunctioning: • The light will flash quickly when the system is operating. (→P.
  • Page 539 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning light goes off. Correction Warning light Warning light/Details procedure Open door warning light (warning buzzer) Check that all the Indicates that a door is doors are closed.
  • Page 540 • Flat tire (→P. 448) tion pressure is adjusted, have the system checked by your Toyota dealer. When the light comes on after blinking for 1 minute: Have the system Malfunction in the tire checked by your pressure warning sys- Toyota dealer.
  • Page 541 5-2. Steps to take in an emergency : Open door warning buzzer: The open door warning buzzer sounds to alert one or more of the doors is not fully closed (with the vehicle having reached a speed of 3 mph [5 km/h]). : Seat belt warning buzzer: The driver’s and front passenger’s seat belts reminder sounds to alert the driver and front passenger that his or her seat belt is not fastened.
  • Page 542 The malfunction indicator lamp will go off after several driving trips. If the malfunction indicator lamp does not go off even after several trips, con- tact your Toyota dealer as soon as possible. ■ When the tire pressure warning light comes on Check the tire inflation pressure and adjust to the appropriate level.
  • Page 543 If there is a lot of snow or ice on the vehicle, particularly around the wheels or wheel housings ● If non-genuine Toyota wheels are used (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.) ●...
  • Page 544 ■ If both the ABS and the brake system warning lights remain on Stop your vehicle in a safe place immediately and contact your Toyota dealer. The vehicle will become extremely unstable during braking, and the ABS system may fail, which could cause an accident resulting in death or serious injury.
  • Page 545 5-2. Steps to take in an emergency CAUTION ■ If the tire pressure warning light comes on Be sure to observe the following precautions. Failure to do so could cause a loss of vehicle control and result in death or serious injury. ●...
  • Page 546 5-2. Steps to take in an emergency CAUTION As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS-tire pressure warning system) that illuminates a low tire pressure telltale (tire pressure warning light) when one or more of your tires is significantly under-inflated.
  • Page 547 5-2. Steps to take in an emergency CAUTION TPMS (tire pressure warning system) malfunctions may occur for a vari- ety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS (tire pressure warning system) from functioning properly.
  • Page 548: If A Warning Message Is Displayed

    The master warning light also comes on or flashes in order to indicate that a message is cur- rently being displayed on the multi-information display. If any of the warning light turns on again after performing the fol- lowing actions, contact your Toyota dealer.
  • Page 549 A buzzer sounds and a warning message is shown on the multi-infor- mation display. The following warnings indicate the possibility of dam- age to the vehicle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning message Details (U.S.A.)
  • Page 550 Have the vehicle inspected immediately. Failure to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning message Details Indicates a malfunction in the LED headlight system.
  • Page 551 If you continue to use the vehicle in this state, you will soon become unable to restart the hybrid sys- tem. Have the hybrid battery (traction battery) inspected by your Toyota dealer immediately. Indicates that restarting of the hybrid system is not possible.
  • Page 552 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning message turns off. Correction Warning message Details procedure Indicates that all maintenance according to the driven dis- tance on the maintenance schedule should be per-...
  • Page 553 5-2. Steps to take in an emergency Correction Warning message Details procedure • Check the grille • Indicates that the pre-collision and the sensor and system is not currently func- clean them if they tional because the grille or the are dirty.
  • Page 554 5-2. Steps to take in an emergency Correction Warning message Details procedure Indicates that there is a high risk of a collision, or that the pre-collision braking function is operating. Slow the vehicle by A buzzer also sounds. applying the (Flashes brakes.
  • Page 555 5-2. Steps to take in an emergency Correction Warning message Details procedure When stopping the vehicle for a long period of time, shift The hybrid battery (traction the shift position to battery) is low. P. The hybrid bat- A buzzer also sounds. tery (traction bat- (Flashes) tery) cannot be...
  • Page 556 5-2. Steps to take in an emergency Correction Warning message Details procedure Indicates that the accelerator Release the accel- pedal is depressed while the erator pedal and shift position is in N. shift the shift posi- A buzzer also sounds. tion to D or R.
  • Page 557 5-2. Steps to take in an emergency Correction Warning message Details procedure Tighten the fuel The fuel filler door has been tank cap and close left open. the fuel filler door. Close the charging The charging port lid is open. port lid.
  • Page 558 5-2. Steps to take in an emergency Have the malfunction repaired immediately. After taking the specified steps to correct the suspected problem, check that the warning message and light turn off. Interior Exterior Correction Warning message Details buzzer buzzer procedure The electronic Confirm key is not...
  • Page 559 5-2. Steps to take in an emergency Interior Exterior Correction Warning message Details buzzer buzzer procedure The driver’s door is opened and closed Turn the while the elec- “POWER” tronic key is out- switch to side the OFF or detection range Once 3 times confirm...
  • Page 560 5-2. Steps to take in an emergency Interior Exterior Correction Warning message Details buzzer buzzer procedure The electronic key has been taken outside Turn the the vehicle and “POWER” the doors have switch to Contin- been locked Once OFF and uous without first lock the...
  • Page 561 5-2. Steps to take in an emergency Interior Exterior Correction Warning message Details buzzer buzzer procedure An attempt to lock the doors has been made using the smart key system while the elec- tronic key is inside the vehi- cle. (vehicles Take the with entry func- electronic...
  • Page 562 5-2. Steps to take in an emergency Interior Exterior Correction Warning message Details buzzer buzzer procedure The driver’s door is opened and closed while the elec- • Shift the tronic key is out- shift posi- side the tion to P. Contin- Contin- detection range...
  • Page 563 5-2. Steps to take in an emergency Interior Exterior Correction Warning message Details buzzer buzzer procedure The elec- tronic key  →P. 591 Once does not operate (Flashes) properly. Next time when starting the Power hybrid system, increase the turned off engine speed due to ...
  • Page 564 “POWER” switch is turned to ON mode after charging has completed (when the vehicle’s charging indicator has turned off). If one of the following messages is displayed, follow the correction proce- dures. If the message displays again after following the correction procedure, contact your Toyota dealer. Correction Message Details procedure...
  • Page 565 • The charging connector has been disconnected Stop charging immedi- ately, and contact your Charging has been inter- Toyota dealer. rupted by a malfunction Also, driving is possible in the charging system. when the hybrid system has been started.
  • Page 566 5-2. Steps to take in an emergency Correction Message Details procedure Switch the electrical appliance OFF, and restart charging by fol- lowing the procedure on P. 80. Charging has been If the message is still stopped because of the displayed, the 12-volt high energy consumption battery may have a low of electrical compo-...
  • Page 567 Charging has been ing station (other than a stopped because of a Toyota dealer), try charg- problem with the charg- ing with a genuine Toyota ing cable. charging cable. If the message is still displayed, contact your Toyota dealer.
  • Page 568: If You Have A Flat Tire

    After temporarily repair- ing the tire with the kit, have the tire repaired or replaced by your Toyota dealer. ■ Before repairing the tire ●...
  • Page 569 5-2. Steps to take in an emergency ■ Emergency tire puncture repair kit components Bottle Stickers Hose Air release cap...
  • Page 570 5-2. Steps to take in an emergency Compressor Air pressure gauge Compressor switch Power plug...
  • Page 571 5-2. Steps to take in an emergency Before performing emergency repair Check the degree of the tire damage. A tire should only be repaired with the emergency tire puncture repair kit if the damage is caused by a nail or screw passing through the tire tread.
  • Page 572 5-2. Steps to take in an emergency ■ In the following cases, the tire cannot be repaired with the emer- gency tire puncture repair kit. Contact your Toyota dealer. ● When the tire is damaged due to driving without sufficient air pres- sure ●...
  • Page 573 5-2. Steps to take in an emergency Taking out the emergency tire puncture repair kit Lift the side deck board. STEP Unhook the tightening strap. STEP Take out the emergency tire puncture repair kit.
  • Page 574 5-2. Steps to take in an emergency Emergency repair method Take out the repair kit from the plastic bag. STEP Remove the valve cap from the STEP valve of the punctured tire. Remove the air release cap from STEP the hose. You will use the air release cap again.
  • Page 575 5-2. Steps to take in an emergency Connect the hose to the valve. STEP Screw the end of the hose clockwise as far as possible. Make sure that the compressor STEP switch is off. Remove the rubber stopper from STEP the compressor.
  • Page 576 5-2. Steps to take in an emergency Connect the power plug to the power outlet socket. (→P. 395) STEP Instrument panel Rear console box...
  • Page 577 Remove any dirt and moisture from the wheel before attaching the sticker. If you are unable to apply the stickers, inform the nearest Toyota dealer that sealant has been applied to the puncture when having the tire repaired or replaced.
  • Page 578 5-2. Steps to take in an emergency Check the specified tire inflation pressure. STEP Tire inflation pressure is specified on the label on the driver’s side pillar as shown. (→P. 619) ITO52P163 Start the hybrid system. (→P. 238) STEP To inject the sealant and inflate STEP the tire, turn the compressor switch on.
  • Page 579 5-2. Steps to take in an emergency Inflate the tire until the specified STEP air pressure is reached. The sealant will be injected and the pressure will spike to 44 psi (300 kPa, 3.1 kgf/cm or bar) or 58 psi (400 kPa, 4.1 kgf/cm bar), then gradually...
  • Page 580 Turn the com- pressor switch off and con- tact your Toyota dealer. • If the tire inflation pressure exceeds the specified air pressure, let out some air to adjust the tire inflation pres- sure.
  • Page 581 5-2. Steps to take in an emergency Attach the air release cap to the STEP end of the hose. If the air release cap is not attached, the sealant may leak and the vehicle may get dirty. Temporarily store the bottle in the luggage compartment while STEP it is connected to the compressor.
  • Page 582 If the tire inflation pressure is under 19 psi (130 kPa, 1.3 kgf/ or bar): The puncture cannot be repaired. Contact your Toyota dealer. If the tire inflation pressure is 19 psi (130 kPa, 1.3 kgf/cm or bar) or higher, but less than...
  • Page 583 Store the bottle in the luggage compartment while it is con- STEP nected to the compressor. Taking precautions to avoid sudden braking, sudden accelera- STEP tion and sharp turns, drive carefully at under 50 mph (80 km/h) to the nearest Toyota dealer.
  • Page 584 5-2. Steps to take in an emergency ■ If the tire is inflated to more than the specified air pressure Disconnect the hose from the valve. STEP Install the air release cap to the end of STEP the hose and push the protrusion on the air release cap into the tire valve to let some air out.
  • Page 585 The sealant stored in the emergency tire puncture repair kit can be used only once to temporarily repair a single tire. If the sealant has been used and needs to be purchased, contact your Toyota dealer. ● The sealant can be used when the outside temperature is from -40°F (-40°C) to 140°F (60°C).
  • Page 586 5-2. Steps to take in an emergency CAUTION ■ Do not drive the vehicle with a flat tire Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair.
  • Page 587 5-2. Steps to take in an emergency CAUTION ■ When fixing the flat tire ● Stop your vehicle in a safe and flat area. ● Do not touch the wheels or the area around the brakes immediately after the vehicle has been driven. After the vehicle has been driven, the wheels and the area around the brakes may be extremely hot.
  • Page 588 5-2. Steps to take in an emergency CAUTION ● The repair kit may overheat if operated for a long period of time. Do not operate the repair kit continuously for more than 60 minutes. ● Parts of the repair kit become hot during operation. Be careful handling the repair kit during and after operation.
  • Page 589 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and...
  • Page 590: If The Hybrid System Will Not Start

    5-2. Steps to take in an emergency If the hybrid system will not start Reasons for the hybrid system not starting vary depending on the situation. Check the following and perform the appropriate proce- dure: ■ The hybrid system will not start even though the correct starting procedure is being followed (→P.
  • Page 591 ● One or both of the 12-volt battery terminals may be discon- nected. ● The 12-volt battery may be discharged. (→P. 594) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function...
  • Page 592: If You Lose Your Keys

    5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer using the other key and the key number stamped on your key number plate.
  • Page 593: If The Electronic Key Does Not Operate Properly

    5-2. Steps to take in an emergency If the electronic key does not operate properly If communication between the electronic key and vehicle is inter- rupted (→P. 119) or the electronic key cannot be used because the battery is depleted, the smart key system and wireless remote con- trol cannot be used.
  • Page 594 5-2. Steps to take in an emergency Starting the hybrid system Depress the brake pedal. STEP Touch the Toyota emblem side of STEP electronic “POWER” switch. If any of the doors is opened or closed while the key is being...
  • Page 595 5-2. Steps to take in an emergency ■ Stopping the hybrid system Set the parking brake, shift the shift position to P and press the “POWER” switch as you normally do when stopping the hybrid system. ■ Replacing the key battery As the above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery is depleted.
  • Page 596: If The 12-Volt Battery Is Discharged

    The following procedures may be used to start the hybrid system if the vehicle’s 12-volt battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your vehicle by follow- ing the steps below.
  • Page 597 5-2. Steps to take in an emergency STEP Connect the jumper cables according to the following procedure: Connect a positive jumper cable clamp to the exclusive jump starting terminal on your vehicle. Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle.
  • Page 598 ON mode. Make sure the “READY” indicator comes on. If the indicator STEP light does not come on, contact your Toyota dealer. Once the hybrid system has started, remove the jumper STEP cables in the exact reverse order from which they were con- nected.
  • Page 599 5-2. Steps to take in an emergency ■ Starting the hybrid system when the 12-volt battery is discharged The hybrid system cannot be started by push-starting. ■ To prevent 12-volt battery discharge ● Turn off the headlights and the audio system while the hybrid system is off.
  • Page 600 5-2. Steps to take in an emergency CAUTION ■ Avoiding 12-volt battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the 12-volt battery: ● Make sure each jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any other than the intended terminal.
  • Page 601 CAUTION ■ After charging the 12-volt battery Have the 12-volt battery inspected at your Toyota dealer as soon as possi- ble. If the 12-volt battery is deteriorating, continued use may cause the 12-volt battery to emit a malodorous gas, which may be detrimental to the health of passengers.
  • Page 602: If Your Vehicle Overheats

    If you do not see steam: Carefully lift the hood. After the hybrid system has STEP cooled down sufficiently, inspect the hoses and radiator core (radiator) for any leaks. Radiator Cooling fans If a large amount of coolant leaks, immediately contact your Toyota dealer.
  • Page 603 (The fans may not operate in freezing temperatures.) If the fans are not operating: STEP Stop the hybrid system immediately and contact your Toyota dealer. If the fans are operating: Have the vehicle inspected at the nearest Toyota dealer.
  • Page 604 (radiator) for any leaks. Radiator Cooling fans If a large amount of coolant leaks, immediately contact your Toyota dealer. The coolant level is satisfactory if STEP it is between the “F” and “L” lines on the reservoir.
  • Page 605 Start the hybrid system and check for the multi-information STEP display. If the message does not disappear: Stop the hybrid system and contact your Toyota dealer. If the message is not displayed: Have the vehicle inspected at the nearest Toyota dealer.
  • Page 606 To prevent damage to the cooling system Observe the following precautions: ● Avoid contaminating the coolant with foreign matter (such as sand or dust etc.) ● Do not use any coolant additives other than the Toyota genuine or similar coolant additives...
  • Page 607: If The Vehicle Becomes Stuck

    5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Set the parking brake and shift the shift position to P. Stop STEP the hybrid system.
  • Page 608 5-2. Steps to take in an emergency NOTICE ■ To avoid damage to the hybrid transmission and other components ● Avoid spinning the wheels and depressing the accelerator pedal more than necessary. ● If the vehicle remains stuck even after these procedures are performed, the vehicle may require towing to be freed.
  • Page 609: If Your Vehicle Has To Be Stopped In An Emergency

    5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following pro- cedure: Steadily step on the brake pedal with both feet and firmly STEP...
  • Page 610 5-2. Steps to take in an emergency CAUTION ■ If the hybrid system has to be turned off while driving Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible before turning off the hybrid system.
  • Page 611: Vehicle Specifications

    Vehicle specifications 6-1. Specifications Maintenance data (fuel, oil level, etc.) ..610 Fuel information ....621 Tire information ....625 6-2. Customization Customizable features ..639 6-3. Initialization Items to initialize ....647...
  • Page 612: Specifications Maintenance Data (Fuel, Oil Level, Etc.)

    6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weight Overall length 176.4 in. (4480 mm) Overall width 68.7 in. (1745 mm) Overall height 58.7 in. (1490 mm) Wheelbase 106.3 in. (2700 mm) Front 60.0 in. (1525 mm) Tread Rear 59.8 in.
  • Page 613 The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
  • Page 614 6-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown. Engine Model 1.8 L 4-cylinder (2ZR-FXE) Type 4-cylinder in line, 4-cycle, gasoline 3.17 × 3.48 in. (80.5 × 88.3 mm) Bore and stroke Displacement 109.7 cu.in.
  • Page 615 6-1. Specifications Fuel Fuel type Unleaded gasoline only Octane Rating 87 (Research Octane Number 91) or higher Fuel tank capacity 10.6 gal. (40 L, 8.8 Imp.gal.) (Reference) NOTICE ■ Notice about fuel For plug-in hybrid vehicles, fuel may remain in the tank for a long time and undergo changes in quality depending on the how the vehicle is used.
  • Page 616 6-1. Specifications Electric motor (Traction motor) Type Permanent magnet motor Maximum output 60 kW Maximum torque 153 ft•lbf (207 N•m, 21.1 kgf•m) Hybrid battery (traction battery) Type Lithium-ion battery Voltage 3.7 V/cell Capacity 21.5 Ah Quantity 56 cells Overall voltage 207 V Lubrication system Oil capacity...
  • Page 617 6-1. Specifications ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC GF-5 multigrade engine oil Recommended viscosity: SAE 0W-20...
  • Page 618 6-1. Specifications How to read oil container label: The ILSAC (International Lubricant Standardization and Approval Committee) Certification Mark is added to some oil containers to help you select the oil you should use.
  • Page 619 Power control 2.2 qt. (2.1 L, 1.8 Imp.qt.) unit Use either of the following: • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based non- Coolant type silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technol- Do not use plain water alone.
  • Page 620 If replacement is necessary, contact your Toyota dealer. NOTICE ■ Transmission fluid type Using transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the transmission of your vehicle.
  • Page 621 6-1. Specifications Brakes Pedal clearance 3.03 in. (77 mm) Min. 0.04  0.24 in. (1.0  6.0 mm) Pedal free play Brake pad wear limit 0.04 in. (1.0 mm) Parking brake lining wear limit 0.04 in. (1.0 mm) 8  11 clicks Parking brake pedal travel Fluid type SAE J1703 or FMVSS No.
  • Page 622 6-1. Specifications Light bulbs Light Bulbs Bulb No. Type Halogen headlights Low beam High beam 9005 LED headlights High beam 9005 Fog lights Front turn signal lights WY21W Exterior Front side marker lights Parking lights (halogen headlights) Rear turn signal lights WY21W Back-up lights W21W...
  • Page 623: Fuel Information

    Gasoline quality In very few cases, driveability problems may be caused by the brand of gas- oline you are using. If driveability problems persist, try changing the brand of gasoline. If this does not correct the problem, consult your Toyota dealer.
  • Page 624 EPA’s lowest additives con- centration program. ● Toyota strongly recommends the use of Top Tier Detergent Gasoline. For more information on Top Tier Detergent Gasoline and a list of marketers, please go to the official website www.toptiergas.com.
  • Page 625 Non-recommendation of the use of gasoline containing MMT Some gasoline contains an octane enhancing additive called MMT (Methyl- cyclopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected.
  • Page 626 6-1. Specifications NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used, the engine will be damaged. ● Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s three-way catalytic converters causing the emission control system to malfunction.
  • Page 627: Tire Information

    6-1. Specifications Tire information Typical tire symbols Tire size (→P. 627) DOT and Tire Identification Number (TIN) (→P. 626) Location of treadwear indicators (→P. 476) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire.
  • Page 628 6-1. Specifications Load limit at maximum cold tire inflation pressure (→P. 481) Maximum cold tire inflation pressure (→P. 619) This means the pressure to which a tire may be inflated. Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Typical DOT and Tire Identification Number (TIN) DOT symbol Tire...
  • Page 629 6-1. Specifications Tire size ■ Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits) Speed symbol...
  • Page 630 6-1. Specifications Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer...
  • Page 631 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. ■ DOT quality grades All passenger vehicle tires must conform to Federal Safety Requirements in addition to these grades.
  • Page 632 6-1. Specifications ■ Traction AA, A, B, C The traction grades, from highest to lowest, are AA, A, B and C, and they represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete.
  • Page 633 6-1. Specifications Glossary of tire terminology Tire related term Meaning Tire pressure when the vehicle has been Cold tire inflation pres- parked for three hours or more, or has not sure been driven more than 1 mile or 1.5 km under that condition The maximum cold inflated pressure to which a Maximum inflation...
  • Page 634 6-1. Specifications Tire related term Meaning 150 lb. (68 kg) times the number of occupants Normal occupant specified in the second column of Table 1 that weight follows Distribution of occupants in a vehicle as speci- Occupant distribution fied in the third column of Table 1 below The combined weight of installed regular pro- duction options weighing over 5 lb.
  • Page 635 6-1. Specifications Tire related term Meaning The load on an individual tire that is determined Vehicle maximum load by distributing to each axle its share of the on the tire maximum loaded vehicle weight, and dividing by two The load on an individual tire that is determined by distributing to each axle its share of curb Vehicle normal load weight, accessory weight, and normal occu-...
  • Page 636 6-1. Specifications Tire related term Meaning Cord The strands forming the plies in the tire The parting of cords from adjacent rubber com- Cord separation pounds Any parting within the tread, sidewall, or inner- Cracking liner of the tire extending to cord material A pneumatic tire with an inverted flange tire and rim system in which the rim is designed with rim flanges pointed radially inward and the...
  • Page 637 6-1. Specifications Tire related term Meaning (a) The sidewall that contains a whitewall, bears white lettering, or bears manufac- turer, brand, and/or model name molding that is higher or deeper than the same Intended outboard molding on the other sidewall of the tire, or sidewall (b) The outward facing sidewall of an asym- metrical tire that has a particular side that...
  • Page 638 6-1. Specifications Tire related term Meaning The linear distance between the exteriors of the sidewalls of an inflated tire, including eleva- Overall width tions due to labeling, decorations, or protective bands or ribs A tire intended for use on passenger cars, mul- tipurpose passenger vehicles, and trucks, that Passenger car tire have a gross vehicle weight rating (GVWR) of...
  • Page 639 6-1. Specifications Tire related term Meaning The linear distance between the exteriors of the sidewalls of an inflated tire, excluding ele- Section width vations due to labeling, decoration, or protec- tive bands That portion of a tire between the tread and Sidewall bead The parting of the rubber compound from the...
  • Page 640 6-1. Specifications Tire related term Meaning Tread separation Pulling away of the tread from the tire carcass The projections within the principal grooves Treadwear indicators designed to give a visual indication of the (TWI) degrees of wear of the tread The fixture used to hold the wheel and tire Wheel-holding fixture assembly securely during testing...
  • Page 641: Customization

    Toyota dealer. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details. Customizable features Vehicles with a Display Audio system: Settings that can be...
  • Page 642 6-2. Customization Custom- Default Item Function ized setting setting Smart key Smart key system system Select doors to Driver’s (→P. 108) All doors unlock door Wireless remote – – control Driver’s door unlocked in All doors Unlocking 1-step, all unlocked Wireless operation doors...
  • Page 643 6-2. Customization Custom- Default Item Function ized setting setting Operation signals – (Emergency flashers) Level 1 to 6 Operation Smart key signals Level 7 system (→P. 108) (Buzzers) and wire- less remote Time elapsed control before (→P. 132) automatic door lock function is 60 seconds –...
  • Page 644 6-2. Customization Custom- Default set- Item Function ized ting setting Driver’s door unlocked in All doors Unlocking using 1-step, all unlocked in – a key doors 1-step unlocked in 2-step Speed-detecting automatic door lock function Door lock (→P. 134, Shifting the shift 591) position to any position other...
  • Page 645 6-2. Customization Custom- Default set- Item Function ized ting setting The one-touch Power closing operation windows – – except for (→P. 171) driver’s seat Time elapsed before lights turn 15 seconds – seconds 30 seconds Operation when the doors are –...
  • Page 646 6-2. Customization Custom- Default set- Item Function ized ting setting Sensor sensitiv- ity for darkening the brightness of the meter, navi- gation system -2 to +2 – – and instrument panel depend- ing on the out- side brightness Meter and instrument Sensor sensitiv- panel...
  • Page 647 6-2. Customization Custom- Default set- Item Function ized ting setting Push once Operation using Push twice Push and Push and “A/C” button on hold for 0.8 – – hold for 2.4 the wireless seconds seconds remote control Remote Air Condition- Push once ing System Push and...
  • Page 648 6-2. Customization Custom- Default set- Item Function ized ting setting Reverse Operation sig- warning nals (Buzzer) Beeps Beeps – – buzzer when shifting repeatedly once (→P. 250) into R Seat belt Vehicle speed reminder linked seat belt – – (→P. 539) reminder buzzer Multi-information display (→P.
  • Page 649: Initialization

    6-3. Initialization Items to initialize The following items must be initialized for normal system operation after such cases as the 12-volt battery being reconnected, or mainte- nance being performed on the vehicle. Item When to initialize Reference Maintenance data After the maintenance is performed P.
  • Page 650 6-3. Initialization...
  • Page 651: For Owners

    For owners Reporting safety defects for U.S. owners ....650 Seat belt instructions for Canadian owners (in French) ..... 651 SRS airbag instructions for Canadian owners (in French) ..... 653...
  • Page 652: Reporting Safety Defects For U.s. Owners

    If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
  • Page 653: Seat Belt Instructions For Canadian Owners (In French)

    Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English.
  • Page 655: Srs Airbag Instructions For Canadian Owners (In French)

    SRS airbag instructions for Canadian owners (in French)
  • Page 667: Index

    Index Abbreviation list ..... 666 Alphabetical index....668 What to do if......680 Vehicles with a Display Audio system: For details of equipment related to the Display Audio system, such as the audio system, refer to the “Display Audio System Owner’s Manual”. Vehicles with a navigation system: For details of equipment related to the navigation sys- tem, such as the audio system, refer to the “Navigation...
  • Page 668: Abbreviation List

    Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING Air Conditioning Anti-lock Brake System Automatic Locking Retractor APGS Advanced Parking Guidance System CCID Charging Circuit Interrupting Device Child Restraint System DISP Display Economy/Ecology Electronic Control Unit Event Data Recorder Emergency Locking Retractor Electric Power Steering Electric Vehicle GAWR Gross Axle Weight Ratings...
  • Page 669 Abbreviation list ABBREVIATIONS MEANING Light Emitting Diode Methylcyclopentadienyl Manganese Tricarbonyl M + S Mud and Snow MTBE Methyl Tertiary Butyl Ether On Board Diagnostics Pre-Collision System Plug-in Hybrid Vehicle Power Supplemental Restraint System Tire Identification Number TPMS Tire Pressure Monitoring (Warning) System TRAC Traction Control Treadwear Indicator...
  • Page 670: Alphabetical Index

    Alphabetical index Alphabetical index Antenna ........427 Automatic air conditioning Anti-lock brake system ...328 system ........358 Armrest ........399 Assist grips ......400 ABS ...........328 Active head restraint ....147 Audio input ......381 Air conditioning system Audio remote control Automatic air conditioning switches system ........358 Audio system...
  • Page 671 Alphabetical index Back door Camera Back door ......140 Care Smart key system....108 Exterior........424 Wireless remote control..132 Interior ........428 Back-up lights Seat belts ......429 Replacing light bulbs .... 507 Cargo capacity ......348 Wattage ........ 620 Cargo hooks ......403 Battery CD player Checking ......
  • Page 672 Alphabetical index Child restraint system Child-protectors....... 135 Booster seats, definition..204 Cleaning Booster seats, installation ..212 Exterior........424 Interior........428 Convertible seats, definition ......204 Seat belts ......429 Convertible seats, Clock .........275 installation......212 Condenser ........466 Console box ......387 Front passenger occupant classification system ...198 Cooling system Engine overheating ....600 Infant seats, definition ...204...
  • Page 673 Alphabetical index Daytime running light Eco drive mode switch ....247 system ........295 Electric power steering ...328 Deck board....... 403 Electronic key If the electronic key does not Defogger Rear window......375 operate properly....591 Side mirrors ......375 Replacing battery ....493 Dimensions......
  • Page 674 Alphabetical index Engine Floor mats ........401 Accessory mode....240 Fluid Compartment ......459 Brake........619 Washer........469 Hood........442 How to start the hybrid Fog lights system ........238 Replacing light bulbs..... 507 Identification number.....611 Switch ........298 Wattage......... 620 If the hybrid system will not start........588 Foot lights ........382 Front fog lights Ignition switch......238...
  • Page 675 Alphabetical index Garage door opener....407 I/M test........438 Gauges ........257 Identification Glove boxes......386 Engine ........612 Vehicle ........611 Ignition switch......238 Hands-free system Illuminated entry system..382 (for cellular phone) Immobilizer system....179 Hazard lights Indicator lights ......262 Switch........524 Initialization Head restraints Items to initialize....647 Adjustment ......
  • Page 676 Alphabetical index Language ........280 Maintenance License plate lights Do-it-yourself Replacing light bulbs .....507 maintenance ....... 439 General maintenance....434 Wattage.........620 Light bulbs Maintenance data ....610 Replacing ......507 Maintenance Wattage.........620 requirements....... 431 Maintenance data.....432 Lights Emergency flasher switch ..524 Meter Fog light switch .....298 Instrument panel light Foot lights......382 control.........
  • Page 677 Alphabetical index Odometer ......... 266 Radar cruise control system ........312 Engine oil......460 Radiator ........466 Radio Opener Back door ......140 Radio data system Fuel filler door....... 174 Hood........442 Rear seats Outside rear view mirrors Adjustment ......149 Adjusting and folding .... 169 Folding down......150 Outside rear view mirror Rear turn signal lights...
  • Page 678 Alphabetical index Safety Connect......415 Service reminder Seat belt reminder light ...537 indicators ......262 Seat belts Shift lever Transmission......245 Adjusting the seat belt...157 Automatic Locking Retractor Side airbags ......184 (ALR) ........158 Side marker lights Child restraint system Replacing light bulbs..... 507 Switch ........292 installation......209 Cleaning and maintaining...
  • Page 679 Alphabetical index Switch Tail lights Audio remote control switches Switch........292 Cruise control switch .... 308 Talk switch Driving mode select Telephone switch switch ......... 247 Theft deterrent system Eco drive mode switch ..247 Immobilizer system ....179 Emergency flasher switch ..524 Tire inflation pressure .....486 EV/HV mode selection Tire information...
  • Page 680 Alphabetical index Tonneau cover ......404 Warning buzzers Tools .........448 Brake system ......533 Total load capacity....348 Open door ......537 Touch tracer display....258 Seat belt reminder....537 Towing Warning lights Dinghy towing......355 Anti-lock brake system Emergency towing....526 (ABS) ........535 Trailer towing......354 Automatic headlight leveling TRAC .........328 system ........536 Traction control......328...
  • Page 681 Alphabetical index Warning messages ....546 Washer Checking ......469 Preparing and checking before winter ...... 349 Switch........300 Washing and waxing....424 Weight Cargo capacity ..... 348 Load limits ......348 Weight ........610 Wheels........490 Window glasses ...... 171 Window lock switch ....
  • Page 682: What To Do If

    What to do if... What to do if... If you have a flat tire A tire punctures P. 566 If the hybrid system will not start P. 588 Immobilizer system P. 179 The hybrid system does not start If the 12-volt battery is P.
  • Page 683 What to do if... ■ Warning lights Master warning light ABS warning light P. 538 Brake system warning light (red indicator) P. 535 Electric power steering system warning light P. 533 P. 535 Charging system Pre-collision system warning light warning light P.
  • Page 684 What to do if... Driver’s belt reminder Radar cruise control light indicator light P. 536 P. 537 Open door warning light Tire pressure warning light P. 537 P. 538 Low fuel level warning light P. 537 Front passenger’s seat P. 537 belt reminder light : The light flashes to indicate a malfunction.
  • Page 685 What to do if...
  • Page 686 Engine oil capacity qt. (L, Imp.qt.) (Drain and refill  With filter 4.4 (4.2, 3.7) reference) Without filter 4.1 (3.9, 3.4 Toyota Genuine Motor Oil or equivalent Engine oil type Oil grade: ILSAC GF-5 multigrade engine oil P. 614...

Table of Contents