Table of Contents
Advertisement
mvr630mg.QX33
2/11/02
18 Remote Control Buttons
Press to play a tape; press to release Slow, Search, or Still
mode and return to normal playback. Details are on page 36.
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 6, press 0,6. If you only press the
Number 6 button, channel 6 will appear after a brief delay. (There also
may be a brief delay when you select channels 10, 11, and 12.) To
select channels 100 and above, enter channel numbers as a three-digit
number. For example, to select channel 117, press 1, 1, 7.
Only channels 2-69 will be available. For quickest results, enter
Press once to start a recording. Details are on page 25. Or, press
repeatedly to start a One-Touch Recording. Details are on page 27.
Press to memorize a tape position at which the real-time
During tape playback, press to view the picture in slow motion.
Press again to resume normal playback. Details are on page 36.
While recording, press to temporarily stop the recording (pause). Press a
second time to resume normal recording. Details are on page 25.
Press during tape playback to freeze the picture. Press again to resume
12:05 PM
Page 18
Press to eject the tape.
Press to turn on or off the VCR.
Press to select an item in the on-screen menu.
Press to access the VCR menu.
Press to select channels at the VCR or use
to set up VCR features (such as the clock).
Press to select the recording speed (SP or SLP).
Details are on pages 30 and 46.
REC(ord)/OTR Button
counter was set to 0:00:00. Details are on page 34.
STILL/PAUSE Button
You can not pause a One-Touch Recording.
playback. Details are on page 36.
EJECT Button
POWER Button
PLAY/o Button
MENU Button
Number Buttons
Cable Users
SPEED
Antenna Users
REC/OTR
channels as above.
SPEED Button
MEMORY Button
SLOW Button
POWER
VCR/TV
EJECT
PLAY
REW
F.FWD
STOP
STATUS/EXIT
1
2
3
CH
4
5
6
7
8
9
0
TIME SEARCH STILL/PAUSE
MEMORY
SLOW
Advertisement
Table of Contents
