Remote Control Buttons - Magnavox VR601BMX Owner's Manual

18 Remote Control Buttons

Press to select channels at the VCR. Use to set up VCR features (such
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 6, press 0,6. If you only press the
Number 6 button, channel 6 will be selected after a brief delay. (There
also may be a brief delay when you select channels 10, 11, and 12.) If
you want to select channels 100 and above, enter channel numbers as a
three-digit number. For example, to select channel 117, press 1, 1, 7.
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 5, press 0,5. If you only press the
Number 5 button, channel 5 will be selected after a brief delay. You may
Press to select the recording speed (SP or SLP). Details are on
Press to fast forward or rewind the tape a specific length of time.
When tape playback is stopped, press to rewind the tape at high speed.
During playback, press to rewind the tape while the picture stays on the
screen. Details are on page 36. Press to return to a previous menu.
Press once to start a recording. Details are on page 25. Or, press
repeatedly to start a One-Touch Recording. Details are on page 27.
Press to access or remove the on-screen status display. Details are on
Press to play a tape; press to release Slow, Search, or Still mode and
return to normal playback. Details are on page 36. Press to select an
Press to memorize a tape position at which the real-time counter was
POWER Button
Press to turn on or off the VCR.
Number Buttons
Cable Users
Antenna Users
only select channels 2-69.
SPEED Button
pages 30 and 44.
TIME SEARCH Button
Details are on page 35.
MENU Button
Press to access the VCR menu.
REWIND/{ Button
REC(ord)/OTR Button
STATUS/EXIT Button
page 20. Press to exit on-screen menus.
PLAY/o Button
item in the VCR menu.
MEMORY Button
set to 0:00:00. Details are on page 34.
as the clock).
POWER VCR/TV EJECT
1 2 3
4 5 6
CHANNEL
7 8 9
0
SPEED MEMORY
TIME SEARCH
MENU STATUS/EXIT CLEAR SLOW
REWIND /PLAY F.FWD
REC/OTR /STOP PAUSE/STILL