Conversion To Lp Gas - LG LSCG306ST Service Manual

WARNING
• DISCONNECT power supply before servicing.
• SHUT OFF gas supply to the cooktop before
sevicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death
or electrical shock.
1. CONVERTING THE REGULATOR
The regulator is located under the right hand corner of the cooktop.
A. Unscrew the hex-nut cap by using an adjustable wrench.
B. Separate plastic cap and hex-nut cap by turning the plastic cap to 90˚.
C. Install the plastic cap so that the solid end of the cap faces outward.
(opposite as received for natural gas)
D. Screw the hex-nut cap back into the regulator. Don't over tighten.
LPG
2. CONVERTING THE SURFACE BURNERS
LP orifice spuds have a orifice code on the top, denoting the location on the cooktop where it
is to be installed.
A. Remove grates, burner caps and burner heads.
B. Remove the brass orifice spud in the chimney of each burner using a
Return the natural gas orifices to the burner body and reattach the burner body and the
instruction sheet to the pressure regulator using the screw removed previously.
LGE Internal Use Only

CONVERSION TO LP GAS

Natural
• Be careful when you work on the Cooktop
handling the sheet metal part.
Copyright © 2008 LG Electronics. Inc. All right reserved.
-43-
Only for training and service purposes
CAUTION
13
/ " or 10 mm Nut driver.
32