Electrode Assembly(Spark Plug)
WARNING
• DISCONNECT power supply before servicing.
• SHUT OFF gas supply to the cooktop before
sevicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death
or electrical shock.
CAUTION
• Be careful when you work on the Cooktop
handling the sheet metal part.
1. Remove the cooktop plate.(See "Cooktop Plate".)
2. Remove the wire ring.
3. Unplug the connector by pulling it.
Connector
When replacing this part with new one, progress reversely
LGE Internal Use Only
COMPONENT REPLACEMENT
Electrode(Spark Plug)
Wire Ring
4. Lift the electrode assembly.
Copyright © 2008 LG Electronics. Inc. All right reserved.
-31-
Only for training and service purposes