LED Lamp Module
WARNING
• DISCONNECT power supply before servicing.
• SHUT OFF gas supply to the cooktop before
sevicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death
or electrical shock.
CAUTION
• Be careful when you work on the Cooktop
handling the sheet metal part.
1. Remove the cooktop plate.(See "Cooktop Plate".)
2. Remove the LED lamp module form the valve by unclipping.
3. Unplug the connector.
4. Remove the LED lamp module.
When replacing this part with new one, progress reversely.
LGE Internal Use Only
COMPONENT REPLACEMENT
LED Lamp Module
Ignition Switch
LED Lamp Module
Connector
Copyright © 2008 LG Electronics. Inc. All right reserved.
-33-
Only for training and service purposes