Double Burner Body - LG LSCG306ST Service Manual

Double Burner Body

WARNING
• DISCONNECT power supply before servicing.
• SHUT OFF gas supply to the cooktop before
sevicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death
or electrical shock.
CAUTION
• Be careful when you work on the Cooktop
handling the sheet metal part.
1. Remove the cooktop plate.(See "Cooktop Plate".)
2. Remove the electrode.(See "Electrode Assembly".)
1
3. Remove the / inch tubing fitting and the
2
4. Unfasten the 2 screws as shown below picture.
5. Lift the burner body.
When replacing this part with new one, progress reversely
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
COMPONENT REPLACEMENT
11
/ inch tubing fitting from the burner gas housing.
16
Phillips Head Screw
1
/ -in. Nut
2
Phillips Head Screw
11
/ -in. Nut
16
-30-
LGE Internal Use Only