Service Data; Update - Bernina 710 Manual

update

2

Service data

The service data of the present condition of the sewing computer can be saved
on a memory stick and sent to the BERNINA-dealer:
⦁
⦁
►
⦁
⦁
⦁
It is recommended to save the data and the settings of the sewing computer
before the update is carried out.
⦁
⦁
⦁
1
It is then checked if:
3
►
After the successful update a message appears and sewing computer is ready
for use.
►
If the data and the settings aren't on the sewing computer anymore after the
update:
⦁
►
033805.51.04_2014-02_Manual_B710_EN
insert memory stick to sewing computer
touch «LOG»-icon
data is saved on the memory stick
remove memory stick
Do not remove the BernIna uSB stick until there is a message
which indicates the end of the update.
insert BERNINA USB stick with the new software version
touch «Update»-icon
touch icon 1
the data of the sewing computer is saved on the USB Stick
touch «Update»-icon 2 to start the procedure
►
a BERNINA USB stick is inserted
►
there is enough free space available
►
the correct software version is on the stick
the data and settings are accepted
if the update cannot be started or if there are problems during the update
process, an error message appears
touch icon 3
the data on the stick are saved on the sewing computer
Please find the latest version of Software at www.bernina.com
Setup Program
51