Sanyo SAP-K71GJA-S Technical & Service Manual page 63

IMPORTANT
Avoid using radio equipment
such as mobile phone near
(within 1 m of) the indoor unit.
Some radio equipment may
cause the unit to malfunction.
If the trouble occurs, dis-
connect power and restart the
air conditioner after a few
minutes.
Remote control receiver
OPERATION selector
OFF position
TEST position
OPERATION lamp
6
Unit Display and Operation Selector
INDOOR UNIT
This section picks up infrared signals from the remote control unit
(transmitter).
ON position This position is for operating the air conditioner with the wireless remote
control unit.
Set the selector to this position for normal operation.
Switch the selector to the OFF position if you are not going to use the
air conditioner for a few days or longer.
The OFF position does not disconnect the power. Use the main
power switch to turn off power completely.
This position is used only when servicing the air conditioner.
Do not set at the TEST position for normal operation.
This lamp lights when the system is in the continuous DRY or COOL
mode.
TIMER lamp This lamp lights when the system is being controlled by the timer.
Operation selector
Remote control receiver
OPERATION
lamp
TIMER lamp
OI-378-06EG