Operations - Bissell SPOTCLEAN PROHEAT 2694 Series User Manual

Assembly
WARNING
Do not plug in your cleaner until you are familiar with all instructions and operating
procedures.
1
Slide the flex hose clip into opening on
the front of the machine. You will hear
a "snap" when it is locked into place.
3
Snap the hose grip bracket into the back of
the machine on the Clean Water/Solution
Tank side.
5
Then wrap the flex hose around the
machine and snap hose grip into bracket.
6
www.BISSELL.ca
2
Attach Cord Wrap by snapping it into
place on the Dirty Water Tank side of the
machine.
4
Snap the second tool storage (select
models) into the back between the Cord
Wrap and hose grip bracket.
6
Wrap the power cord around the Cord
Wrap.