Disassembly and replacement instructions
Dispense wheel removal
1. Remove all ice from storage area of
dispenser.
2. Remove center thumbscrew (Fig. 12.1),
locking plate (Fig. 18.2), two wingnuts
(Fig. 12.3) and backing plate (Fig. 18.4)
from front of storage hopper (see drawing at
right).
3. Remove threaded rod (Fig. 12.5), agitator
(Fig. 12.6), baffle (Fig. 12.7), and wheel
(Fig. 12.8) in this sequence.
Wheelmotor removal
1. Remove dispense wheel.
2. Remove four (4) dispenser motor bracket
mounting screws and washers (Fig. 13.1).
3. Remove (4) screws holding motor to
mounting bracket (Fig. 13.2).
Fig. 13
36
E12CI425A 230 V 50 Hz, C12CI425A 220 V 60 Hz
2
1
Fig. 12
4
3
2
1
1
5
6
1
7
8