Serial Encoder Connection Procedures - Omron CK3W-ECS300 Startup Manual

Serial Encoder Connection Proce-
dures
Startup Guide for Serial Encoder BiSS-C/EnDAT 2.1/2.2/1S Motor (O051)
This section describes the procedures to connect the Controller and Serial Encoder.
The description assumes that the Controller is set to factory default.
3-1 Work Flow ....................................................................................................... 3-2
3-2 Controller Setting Preparations .................................................................... 3-3
3-2-1 Creation of a New Project ............................................................................... 3-3
3-2-2 Controller Initial Setting ................................................................................... 3-4
3-3 Serial Encoder Wiring .................................................................................... 3-6
3-4 Various Controller Settings and Checking Operation ................................ 3-7
3
3
3-1