Watchguard NX3CE12 Hardware Manual page 7

A close-up of the right side of the XTM 1050:
The indicators and connectors are:
Interface ports
The XTM 1050 has a total of 14 interface ports. Interface ports have standard RJ45 connectors.
Interface ports 0 - 11 are labeled 0, 1, 2, 3...11.
Interface ports 12 and 13 are not numbered. These ports are labeled Management. For these ports,
the left interface port is number 12, and the right interface port is number 13.
Indicators for numbered RJ45 interfaces
At the bottom of each numbered RJ45 interface, there is a pair of indicators. The indicator at the left
of the interface is the activity indicator for that interface. The indicator at the right shows the
connection speed for that interface.
Indicator
Activity (lower left)
Connection Speed
(lower right)
Indicators for RJ45 interfaces labeled Management
At the top of each RJ45 interface labeled Management (interface ports 12 and 13), there is a pair of
indicators. The indicator at the left of the interface is the activity indicator for that interface. The
indicator at the right shows the connection speed for that interface.
Indicator
Activity (upper left)
Connection Speed
(upper right)
Hardware Guide
Indicator color
Green
Not lit
Blinks
(speed of blink increases as the
data flow increases)
Not lit
Green
Yellow
Indicator color
Green
Not lit
Blinks
(speed of blink increases as the
data flow increases)
Not lit
Green
Yellow
Hardware Specifications
Interface Status
Power on, connection established
Power off, no connections
Data sent and received
Operates at 10 Mbps
Operates at 100 Mbps
Operates at 1000 Mbps
Interface Status
Power on, connection established
Power off, no connections
Data sent and received
Operates at 10 Mbps
Operates at 100 Mbps
Operates at 1000 Mbps
5