Hardware Description; Front View - Watchguard NX3CE12 Hardware Manual

Hardware Specifications

Hardware Description

Front View

The entire front of the device:
A close-up of the front left side of the device:
LCD indicator panel
Device status information appears on the LCD screen. Press the buttons to the right of the screen to
change the information that appears on the screen.
For more information, see "Use the LCD Interface" on page 10.
LCD console buttons
Press the LCD console buttons to see status information and start recovery procedures.
To boot the device in safe mode, press and hold the down arrow button when you power on the
device.
For detailed information about the LCD indicator panel and the LCD console buttons, see "Use the
LCD Interface" on page 10.
Power
When the device is powered on, the power indicator is green.
Arm/Disarm
When the device is armed, this indicator is green. When the device is disarmed, this indicator is red.
Hard disk bay
Reserved for possible future use.
Serial port (Console)
An RJ-45 connector for the serial port.
Dual USB Port
Connect a USB storage device to use for USB backup and restore, or to store a support snapshot.
For more information about USB functions, see the Fireware XTM WatchGuard System Manager Help
or Fireware XTM Web UI Help.
4 WatchGuard XTM 1050