The XTM 3 Series has the reliability, redundancy, traffic management, and port density that demanding, high- speed networks require. Note This Hardware Guide applies to XTM 330 devices. If your XTM 3 Series device has a different model number, your hardware is described in the XTM 3 Series Hardware Guide that applies to that model.
When the device is armed, this indicator is green. When the device is disarmed, this indicator is red. Storage ( When there is activity on the compact flash, this indicator is yellow. All interfaces are on the front of the device. Serial port (Console) An RJ45 connector for the serial interface. WatchGuard XTM 3 Series...
Controls the power supplied to the device. Caution You must disconnect the power supply before you remove the cover of the XTM 3 Series device. If you open the cover without prior authorization from WatchGuard, this voids the Hardware Warranty.
The XTM 3 Series device is certified to operate correctly between 0 – 40°C (32 – 104°F). Reduced Air Flow When you install the XTM 3 Series device in a rack, make sure that the amount of air flow required for safe operation of the equipment is not compromised.
Hardware Specifications Safety Notices All WatchGuard products are designed and tested to meet strict safety requirements. These requirements include product safety approvals and other global compliance standards. Read these instructions carefully before you operate the product, and refer to them as needed for continued safe operation of your product.
Page 10
Hardware Specifications Sicherheitshinweise Alle WatchGuard Produkte wurden entwickelt und getestet um die strikten Sicherheitsrichtlinien zu erfüllen. Diese Richtlinien beinhalten Produktsicherheit Freigaben und andere weltweite Sicherheitsstandards. Vor Inbetriebnahme des Produktes lesen Sie die Anleitung sorgfältig durch und bei Bedarf beziehen Sie sich auf sie für einen dauerhaft sicheren Betrieb Ihres Produktes.
Page 11
Safe Mode In safe mode, you can get access to an XTM 3 Series device when normal access to the device is lost. You can also use safe mode to reset device passphrases when you do not know or have forgotten them.
Page 12
Use the LCD Interface in Normal Mode The XTM 3 Series device automatically boots in normal mode, unless you specifically put it in safe mode. To operate, the device uses the installed Fireware XTM OS and the rules in the configuration file you have saved to the device.
Page 13
Hardware Specifications Example To see the CPU temperature of the XTM 3 Series device on your LCD screen: 1. Press the Right Arrow button to scroll through options until Hardware Monitor appears. 2. Press the Down Arrow button to see the options below that menu item.
WatchGuard Technologies, Inc. (“WatchGuard”) and you agree as set forth below or on the reverse side of this card, as applicable: 1.
Page 16
WITH REGARD TO ANY PRODUCT WILL IN NO EVENT EXCEED THE PURCHASE PRICE PAID BY YOU FOR SUCH PRODUCT. THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY. IN NO EVENT WILL WATCHGUARD BE...
This device must accept any interference received, including interference that may cause undesired operation. CE Notice The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU).
Legal and Regulatory Information Korean Class A Notice People’s Republic of China Electronic Industry Standard This table is presented in accordance with SJ/T11364-2006, Marking for Control of Pollution Caused by Electronic Information Products, implemented in November 2006. Hardware Guide...
WEEE statutes, and that the recovery of our product per the specific EU country legislative requirements is seamless for our product’s end users. If you have a WatchGuard product that is at its end of life and needs to be disposed of, please contact WatchGuard Customer Care Department at: U.S. Customers: 877.232.3531 International Customers: +1.206.613.0456...
Legal and Regulatory Information Licensing Some components of the WatchGuard System Manager software are distributed with source code covered under one or more third party or open source licenses. You can find full licensing information in the product documentation on our public web site at www.watchguard.com/help/documentation. We include below the full text of the GNU General Public License.
(or else, saying that you provide a warranty) and that users may redistribute the program under these WatchGuard XTM 3 Series...
Page 23
Legal and Regulatory Information conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole.
Page 24
Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. WatchGuard XTM 3 Series...
Page 25
Legal and Regulatory Information NO WARRANTY 1. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Page 26
Legal and Regulatory Information WatchGuard XTM 3 Series...