MSI B75A-E33 Series Manual page 36

IMportANt
you can download the driver from
http://download3.msi.com/files/downloads/dvr_exe/intel7x_rst_floppy_mb.zip
Installing the Windows Xp operating System:
please follow the below steps:
. Access BIoS, set SAtA Mode to AhCI mode, save, exit and reboot.
2. Ensure the uSB Floppy disk drive is connected to the computer.
3. Install Windows Xp. When Windows Setup screen appears a message "press
F6 if you need to install a third party SCSI or rAId driver....", press "F6" key.
4. Insert the floppy disk containing the AhCI drivers into the floppy disk drive.
5. When the next screen appears, press the "S" key to specify an additional
device.
6. From the provided list, select the Intel(r) 7 Series SAtA AhCI Controller.
7. Follow the on-screen instructions to complete the installation.
36