Time-Setting Options; Timer; Cooking Time - Siemens CN678G4 1B Series Instruction Manual

Table of Contents

Advertisement

Time-setting options

en
Notes
If a cooking time has been set, this runs
independently of rapid heating and counts down
immediately when the operation is started.
You can use the
l
cooking compartment temperature during rapid
heating.
Cancelling
Press the
button. The
c
the display.
OTime-setting options
Your appliance has different time-setting options.
i o n s
T i m e - s e t t i n g o p t
Time-setting option
Use

Timer

The timer functions like an egg timer. An
Q
audible signal sounds once the set time
has elapsed.

Cooking time

A signal sounds once a set cooking time
+
has elapsed. The appliance switches off
automatically.
End time
Set a cooking time and an end time. The
*
appliance switches off automatically so
that the operation ends at the desired
time.
Notes
A cooking time of up to one hour can be set exactly
to the minute.
A cooking time over one hour can be set in five-
minute increments.
Depending on which direction you turn the rotary
selector, the cooking time starts at a default value:
Anti-clockwise, 10 minutes,
Clockwise, 30 minutes.
After a time-setting option has elapsed, a signal
sounds and "Finished" appears in the status bar.
Using the
button, you can request information
l
during the operation, which then appears briefly in
the display.
Timer
You can set the timer at any time, even if the appliance
is switched off. It runs parallel to the other time settings
and has a separate audible signal. In this way, you can
tell whether it is the timer or a cooking time which has
elapsed.
The maximum setting you can apply is 24 hours.
Press the
button.
0
1.
The field for the timer opens.
Use the rotary selector to set the timer duration.
2.
The timer starts after a few seconds.
The
symbol for the timer and the time counting down
U
are displayed on the left in the status bar.
16
button to check the current
symbol disappears from
c
When the time has elapsed
An audible signal sounds. "Timer elapsed" appears in
the display. Use the
0
signal early.
Cancelling the timer duration
Press the
button to open the time-setting options
0
menu and turn the time back. Press the
close the menu.
Changing the timer duration
Use the
button to open the time-setting options
0
menu and change the timer time in the next few
seconds using the rotary selector. Start the timer with
the
button.
0
Cooking time
If you set the cooking time for your meal, the operation
stops automatically once this time has elapsed. The
oven stops heating.
The maximum setting you can apply is 23 hours and 59
minutes.
Prerequisite: A type of heating and a temperature have
been set.
For example: Setting for 4D hot air, 180 °C, cooking
time 45 minutes.
Press the
button.
0
1.
The time-setting options menu opens.
Set the cooking time using the rotary selector.
2.
Press the Start/Stop button to start.
3.
You can see the
x
the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. "Finished"
appears in the status bar. You can cancel the audible
signal early using the
0
Cancelling the cooking time
Press the
0
button to open the time-setting options
menu. Turn the time back. The type of heating and
temperature set are shown in the display.
button to cancel the audible
0
button to
cooking time counting down in
button.

Advertisement

Table of Contents
loading

Table of Contents