Table of Contents
Advertisement
Function
Presentation
Timer
Language
Projector
Installation
Menu
Settings
Operation
Settings
Reminds the presenter to finish the presentation within a certain time
frame. See
"Setting the presentation timer" on page 33
Sets the language for the On-Screen Display (OSD) menus. See
the menus" on page 24
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors. See
Menu Display Time
Sets the length of time the OSD will remain active after your last key
press.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Sets the reminder messages on or off.
Direct Power On
Allows the projector to turn on automatically once the power is fed
through the power cord.
Signal Power On
Sets whether to turn the projector directly on without pressing
POWER or ON when the projector is in standby mode and the signal
is feed through the VGA cable.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See
page 50
for details.
Instant Restart
Selecting On enables you to restart the projector immediately within
90 seconds after turning it off.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
page 34
for details.
Sleep Timer
Sets the auto-shutdown timer.
Description
for details.
"Choosing a location" on page 14
"Setting Auto Power Off" on
for details.
"Using
for details.
"Hiding the image" on
Operation
45
Advertisement
Table of Contents
