Table of Contents
Advertisement
11. PAGE +/PAGE -
Operate your display software program
(on a connected PC) which responds to
page up/down commands (like Microsoft
PowerPoint).
12. ASPECT
Selects the display aspect ratio.
13. NETWORK SETTING
No function.
14. SOURCE
Displays the source selection bar.
15. QCast
Switches the projector source to HDMI-
2/MHL.
16. AUTO
Automatically determines the best
picture timings for the displayed image.
17. FREEZE
Freezes the projected image.
18. SMART ECO
Displays the lamp mode selection bar.
19. ECO BLANK
Used to hide the screen picture.
Remote control effective range
The remote control must be held at an angle within 30 degrees perpendicular to the
projector's IR remote control sensor(s) to function correctly. The distance between the
remote control and the sensor(s) should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensor(s) on
the projector that might obstruct the infra-red beam.
Operating the projector from the front •
•
12
Introduction
20. QUICK INSTALL
Quickly selects several functions to adjust the
projected image and displays the test pattern.
Operating the LASER pointer
The Laser Pointer is a
presentation aid for professionals.
It emits red colored light when
you press it.
The laser beam is visible. It is
necessary to press and hold
LASER for continuous output.
WARNING:
Do not look into the laser light window or shine the
laser light beam on yourself or others. See the warning
messages on the back of the remote control prior to
using it.
The laser pointer is not a toy. Parents should be
mindful of the dangers of laser energy and keep
this remote control out of the reach of children.
Operating the projector from the top
Advertisement
Table of Contents
