Table of Contents
Advertisement
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either
the top or bottom. It occurs when the projector is not perpendicular to the screen.
You can correct this automatically following these steps:
1.
Press MENU and then press
2.
Press
to highlight Auto Keystone and press
To manually correct this, you will need to
follow these steps:
1.
Do one of the following steps to
display the keystone correction page.
•
Press KEYSTONE on the
remote control.
•
Press QUICK INSTALL on the remote control. Press
Keystone and press OK.
•
Press MENU and then press
Press
2.
The Keystone correction page displays. Press
of the image. Press
/
to highlight Keystone and press OK.
to correct keystoning at the bottom of the image.
until the DISPLAY menu is highlighted.
/
to select On.
Press
/
until the DISPLAY menu is highlighted.
to correct keystoning at the top
.
.
Press
to highlight
Operation
23
Advertisement
Table of Contents
