WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
optical drive
2
Remove the
base
cover.
3
Remove the fan.
Procedure
1
Remove the two screws (M2.5x5) that secure the left hinge to palm rest and keyboard assembly.
2
Open the left hinge.
3
Open the latch and disconnect the power-button board cable from the system board.
4
Peel off the tape that secures the power-button board to the palm rest and keyboard assembly.
5
Remove the screw (M2x3) that secures the power-button board to the palm rest and keyboard assembly.
6
Lift the power-button board, along with the cable, off the palm rest and keyboard assembly.
Removing the power-button board
computer. After working inside your computer, follow the instructions in
(optional).
After working inside
www.dell.com/
Removing the power-button board
38
69