Radio Reception - Philips AJ3720 Owner's Manual

RADIO RECEPTION

When you switch on the radio, the last preset or station tuned to
will be heard.
1. Press RADIO ON to switch on the radio mode.
™ The radio frequency and waveband appear in the display
for 10 seconds before reverting back to the clock display.
Press RADIO ON again if you want to view the radio
display.
2. Adjust the BAND switch to select the waveband.
3. Tune to the station either manually, automatically or by
using the presets.
To improve radio reception
FM: extend the pigtail antenna at the back of the set
completely for optimum reception.
MW(AM): uses a built-in antenna. Direct the antenna by
adjusting the position of the set.
4. Adjust the sound using the VOLUME control.
5. To switch off the radio, press ALARM RESET/RADIO OFF.
™ The display reverts to showing the clock time.
RADIO
AL CLOCK RADIO
VOLUME
VOLUME
ITAL CLOCK RADIO
9