Embroidery Attractive Finishes - Brother 888-M36 Operation Manual

Embroidering Preparation
d Be sure that no objects or hands are near the
embroidery unit and press
 The carriage moves to its initial position.
 The screen for selecting the embroidery pattern type
is displayed.
■ Removing the embroidery unit
Make sure that the machine is completely stopped and
follow the instructions below.
a Remove the embroidery frame.
• For details on removing the embroidery frame, refer
to "Removing the embroidery frame" on page 23.
b Press , and then press
 The embroidery carriage moves into a position
where it can be stored.
Turn off the machine.
c
CAUTION
• Always turn off the machine before removing
the embroidery unit.
It may cause malfunctions if removed when
the machine is turned on.
d Hold the release button on the bottom left of the
embroidery unit, and slowly pull the embroidery unit
to the left.
20
.
.

Embroidery Attractive Finishes

There are many factors that go into beautiful embroidery.
Using the appropriate stabilizer (page 21) and hooping the
fabric in the frame (page 21) are two important factors
mentioned earlier. Another important point is the
appropriateness of the needle and thread being used. See
the explanation of threads below.
■ Thread
Upper thread Use embroidery thread intended for use with
this machine. Other embroidery threads may
not yield optimum results.
Bobbin thread Use the included bobbin pre-wound with 90
weight embroidery bobbin thread or
recommended 90 weight embroidery bobbin
thread (page 8).