Step
Screw (quantity)
2
M2 × L2 mm, flat-head, nylon-coated (1)
4
M2 × L2 mm, flat-head, nylon-coated (1)
When installing:
• Before installing a wireless WAN card, peel off the protection film (if any) on the thermal pad in the wireless
WAN card slot.
• Ensure you plug the blue cable into connector
wireless WAN card.
1040 Memory module
For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 61
Removal steps of the memory module
When installing:
Insert the notched end of the memory module into the memory slot. Press the memory module in firmly, and
pivot it downward until it snaps into place. Ensure that the memory module is firmly installed in the slot and
does not move easily.
1050 Speaker assembly
For access, remove this FRU:
• "1010 Base cover assembly" on page 61
64
P1 Gen 5 / X1 Extreme Gen 5 Hardware Maintenance Manual
Color
Silver
Silver
D
and the orange cable into connector
Torque
0.181 Nm
(1.85 kgf-cm)
0.181 Nm
(1.85 kgf-cm)
M
marked on the