Table of Contents
Advertisement
Removal steps of the power button with fingerprint reader module and cable
Step
Screw (quantity)
2
M2 × L2.5 mm, flat-head, nylon-coated (2)
When installing:
Ensure that the connector is attached firmly.
1190 Keyboard bezel assembly
To remove the keyboard assembly, remove these FRUs in order:
• "1010 Base cover assembly" on page 61
• "1020 Nano-SIM-card tray (for selected models)" on page 62
• "1030 Wireless WAN card (for selected models)" on page 62
• "1040 Memory module" on page 64
• "1070 Built-in battery" on page 70
• "1060 Thermal fan assembly (for non-RTX models only)" on page 65
• "1050 Speaker assembly" on page 64
• "1090 Coin-cell battery" on page 72
• "1100 M.2 solid-state drive" on page 73
• "1110 Wireless WAN antenna assembly with sensor cable" on page 76
• "1120 dc-in bracket and dc-in cable" on page 78
• "1130 Keyboard subcard and keyboard-subcard cable" on page 79
• "1170 Trackpad and trackpad cable" on page 90
• "1180 Power button with fingerprint reader assembly" on page 92
• "1140 LCD unit" on page 80
• "1150 System board and buzzer with cable (for non-RTX models only)" on page 82
• "1160 Combined system board assembly (for RTX models only) and buzzer with cable" on page 86
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
93
Advertisement
Table of Contents
