1160 Combined System Board Assembly (For Rtx Models Only) And Buzzer With Cable - Lenovo ThinkPad X1 Extreme Gen 5 Hardware Maintenance Manual

For wireless LAN model, when installing:
• Ensure that you install the buzzer at the back side of the system board.
• Ensure that you install the memory module mylar as shown below.
• Ensure that you install the M.2 solid-state drive thermal pads as shown below and then remove the dust
protection film of the thermal pad. For more information about how to attach M.2 solid-state drive thermal
pad, see "1100 M.2 solid-state drive" on page 73.
1160 Combined system board assembly (for RTX models only) and
buzzer with cable
Important notices for handling the system board
Note: For RTX models, thermal module and system board are combined as one FRU (FRU name: combined
system board assembly). The thermal module contains liquid metal thermal interface material. DO NOT
disassemble this thermal module. For more information, refer to the warning label on combined system
board assembly. Below illustration shows the location of the label.
86
P1 Gen 5 / X1 Extreme Gen 5 Hardware Maintenance Manual
WARNING
Liquid Metal TIM is applied
DO NOT disassemble this thermal module.
This thermal module is part of the system board FRU.
Scan the QR code for more detailed instructions.