Related Manuals for King Industrial KC-6150C
Summary of Contents for King Industrial KC-6150C
- Page 1 1.5 Hp cyclone dust collector instruction MAnuAl MODEL: KC-6150C COPYRIGHT © 2018 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
-
Page 2: Warranty Information
wArrAnty InForMAtIon 2-yeAr kInG cAnAdA tools LIMITED WARRANTY OFFERS A 2-YEAR LIMITED WARRANTY FOR THIS 1.5 HP CYCLONE DUST COLLECTOR FOR COMMERCIAL USE. ProoF oF PurcHAse Please keep your dated proof of purchase for warranty and servicing purposes. rePlAceMent PArts Replacement parts for this product are available at our authorized King Canada service centers across Canada. -
Page 3: General Safety Instructions For Power Tools
GenerAl sAFety InstructIons For Power tools 1. know your tool 12. AlwAys weAr sAFety GlAsses. Read and understand the owners manual and labels affixed to Always wear safety glasses (ANSI Z87.1). Everyday eyeglasses only have impact resistant lenses, thet are not safety glasses. the tool. - Page 4 sPecIFIc sAFety InstructIons For your cyclone dust collector 11) Use extra care when collecting dust on stairs. 2) Plan your work to protect your eyes, hands, face, ears and body. 12) To avoid injury from accidental starting, unplug power cord before 3) weAr sAFety GoGGles.
-
Page 5: Electrical Information
electrIcAl InForMAtIon wArnInG! ALL ADJUSTMENTS OR REPAIRS MUST BE DONE WITH THE CYCLONE DUST COLLECTOR DISCONNECTED FROM THE POWER SOURCE. FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY! GenerAl InForMAtIon- 110V single phase operation stops the motor automatically due to motor overheating or low voltage. Allow motor to cool down, then press the reset button (C) to reset, and then restart the motor. -
Page 6: Specifications
11. Canister filter 12. Canister filter handle (for cleaning) 13. Remote control 14. Off button 15. On button sPecIFIcAtIons Motor MODEL ....................................KC-6150C HORSEPOWER ..................................1.5 HP VOLTAGE ......................................110V AMPERAGE ......................................14A R.P.M ......................................3450 Hz ........................................60 PHASE ........................................1 MAX AIR SUCTION CAPACITY ............................1,050 CFM INLET HOSE DIAMETER ................................2 x 4’’... - Page 7 AsseMbly 1. Secure the wheels (B) Fig.4 to the base (A). FIGure 4 2. Secure the left stand (A) Fig.5 and right stand (B) to the base (C) using flange head bolts. Notice the placement of the stands as shown in Fig.5.
- Page 8 AsseMbly 6. Install the handle (A) Fig.7 to the canister filter (D) by tightening the set screw (B) and hex. nut (C). 7. Stick foam (F) Fig.7 around the bottom lip of the canister filter (D). Then install and secure the canister filter plastic bag (G) to the bottom lip of the canister filter using the bag clamp (H).
-
Page 9: Assembly & Maintenance
AsseMbly & MAIntenAnce 12. Install the wheel castors (A) Fig.10 to the bottom of the drum (B). 13. Position the large plastic drum bag (C) inside the drum (B). 14. Assemble the drum bag frame as shown in Fig.10. Assemble the straight bars (D) and angled bars (E) to the top ring (F) and bottom ring (G) using pan head screws (H) and hex.