Driving Through Water - Polaris RZR RS1 2019 Owner's Manual

OPERATION

DRIVING THROUGH WATER

Your vehicle can operate through water with a maximum recommended depth
equal to floor level. Follow these precautions when operating through water:
1. Determine the water depth and current before entering the water.
2. Choose a crossing where the water level is lowest and where both banks
have gradual inclines. Never operate in water that exceeds the maximum
recommended depth (floor level)
The large tires on your vehicle may cause the vehicle to float in deep or fast-
flowing water, which could result in loss of traction, loss of control, rollover or
3. Wet brakes may have reduced stopping ability. After leaving water, test the
brakes. Apply them lightly several times while driving slowly. The friction will
help dry out the pads. Avoid applying brake and throttle at the same time.
Major engine damage can result if the vehicle is not thoroughly inspected after
operation in water. Perform the services outlined in the maintenance chart.
Give special attention to engine oil, transmission oil, demand drive fluid, rear
56
q
.
WARNING
accident.
NOTICE
gearcase oil, and all grease fittings.