Polaris RZR RS1 2019 Owner's Manual page 132

MAINTENANCE
FUSE BOX
Remove the fuse box cover during storage.
STORAGE AREA / COVERS
Be sure the storage area is well ventilated. Cover the vehicle with a genuine
POLARIS cover. Do not use plastic or coated materials. They do not allow
enough ventilation to prevent condensation, and may promote corrosion and
oxidation.
REMOVAL FROM STORAGE
1. Charge the battery if necessary.
2. Make sure the spark plug is tight. Reinstall the fuse box cover if it was
removed for storage.
3. Fill the fuel tank with fuel.
4. Check all the points listed in the Daily Pre-Ride Inspection section. Tightness
of the bolts, nuts and other fasteners should be checked by an authorized
POLARIS dealer or other qualified service facility.
5. Lubricate at the intervals outlined in the Periodic Maintenance Chart
beginning on page 76.
Engine exhaust contains poisonous carbon monoxide and can cause loss of
consciousness or death. Never run an engine in an enclosed area.
TRANSPORTING THE VEHICLE
For functional descriptions detailing how to operate the DYNAMIX suspension
system, consult the Polaris RideCommand manual.
Follow these procedures when transporting the vehicle.
After a ride, allow the engine to idle for 30 seconds before stopping the engine.
130
This will allow the turbo system to cool down.
WARNING
NOTE
NOTICE