Polaris RZR RS1 2019 Owner's Manual page 102

MAINTENANCE
4. Using an oil filter wrench, turn the filter
5. Using a clean dry cloth, clean the filter sealing surface on the crankcase.
6. Lubricate the o-ring on the new filter with a film of fresh engine oil. Check to
make sure the o-ring is in good condition.
7. Install the new filter and turn by hand until the filter gasket contacts the
sealing surface, then turn an additional 3/4 turn.
8. Reinstall the crankcase drain plug with a new sealing washer. Torque to 12 ft.
lbs. (16 Nm).
The sealing surface on the drain plug should be clean and free of burns, nicks,
100
w
counter-clock- wise to remove it.
NOTE
or scratches.