Polaris RZR RS1 2019 Owner's Manual page 115

4. Inspect the air filter
5. To remove the filter, slide the filter to the left, as you are looking to the rear of
the vehicle.
6. With the filter removed, clean the intake tube and air box thoroughly. Wipe
well with a clean, dry cloth.
Dirt or debris in the intake tube could result in severe engine damage. Always
clean all dirt and debris from the intake tube before installing the filter.
7. Reinstall the air filter (if clean) or install a new air filter (if soiled). Do not
attempt to clean the air filter.
Use of a non-POLARIS-approved air filter may cause engine damage. Always
use a POLARIS-approved replacement filter. Replacement filters are available
8. Make sure that there are no gaps between the filter, the filter ring and the
stop on the intake tube.
9. Reinstall the air box cover and ensure the hinge is properly aligned.
10. Secure the cover clips.
11. Reinstall the access panel.
w
and air box for dirt, debris or water.
NOTICE
NOTICE
at your POLARIS dealer.
MAINTENANCE
113